Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Willis, TX
Gate repair in Willis, TX runs into two problems more than anything else: corrosion from Lake Conroe humidity and gate posts knocked out of plumb by Montgomery County’s shifting clay soil. Those two issues drive most of our service calls across Willis, from the older ranchettes off Shepard Hill Road to the newer subdivisions going in near the interstate. We’re Portcullis Gate Repair, a Kingswell company serving Willis with written upfront pricing and a 365-day guarantee on every repair. Call us at (940) 412-7340 and you’ll get a live person, not a voicemail tree.
Why Willis Homes Are Different
Willis sits right where the Houston metro’s suburban edge meets the rural acreage around Lake Conroe, and the housing stock reflects it. One call might have us out at a 1970s pipe-and-post ranch gate on five acres, the next at a post-2015 ornamental iron gate in a lakefront community. Each one fails differently.
The common thread is moisture. Montgomery County catches nearly 50 inches of rain a year, and the lake shoreline pushes ambient humidity even higher on surrounding properties. Iron hinges seize, operator housings pit and rust through, and low-voltage wiring connections corrode faster than you’d see in Conroe or Spring. We carry penetrating oil, replacement hinges, and weather-sealed junction boxes on every Willis truck for that reason.
Then there’s the soil. The heavy clay under this part of the county swells after wet seasons and contracts in dry spells. Gate post footings tilt, sometimes visibly within a single winter. When a gate starts dragging or the latch won’t line up, the post is usually the culprit, not the gate itself. A technician who realigns the gate without resetting the post will be back inside a year. We address the post first.
Willis also took a serious hit in the February 2021 freeze. Cracked operator housings, seized hydraulic rams, and damaged low-voltage wiring created a wave of repair demand that still echoes in the equipment we replace today. If your gate has been temperamental since that storm, the freeze likely weakened something that finally let go.
Our Main Willis Services
Willis homeowners call us most about two things: fixing a gate that has stopped working, and fitting an older property or new build with an automated entry. Each service has its own page with pricing, walkthroughs, and what to expect.
Gate Repair in Willis
Most Willis repair calls are swing gates with worn hinges, sagging weld joints, or posts that have drifted out of alignment. We repair tubular steel farm gates, ornamental iron driveway gates, and everything between. The clay soil here means we check post footing integrity on almost every repair, even when the reported problem is a hinge or a latch. If the post has moved, the repair won’t hold. Gate Repair in Willis covers our full repair process and what a typical fix costs.
Gate Installation in Willis
Willis installation jobs split between two worlds: new automated ornamental gates on recently built homes near Lake Conroe, and older acreage properties converting from manual pipe gates to electric operation. The second group often has agricultural-grade posts that were never intended to support an automated gate, so installation starts with the footing, not the gate panel. We handle the post work, the gate, the operator, and the low-voltage power run. Gate Installation in Willis walks through the process and what drives cost.
Electric Gate Repair in Willis
Humidity is rough on gate operators in Willis. Control boards corrode, limit switches fail, and capacitor-discharge motors wear out faster near the lake than they do in drier parts of Montgomery County. We carry parts for nine major operator brands, so most electric repairs happen on the first visit. When a gate opens partway and stops, or the remote stopped working overnight, it’s usually an operator problem, not a gate problem. Electric Gate Repair in Willis details the diagnosis process and common failures.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Willis
Our Willis technicians carry parts for Linear, Viking, Ghost Controls, and DoorKing operators, among the nine brands we service. We keep common control boards, remotes, and safety photocells stocked on the truck. See our brands page for the full list. Most brand-specific repairs happen same visit.
Pricing for Gate Company in Willis, TX
| Service | Typical range in Willis |
|---|---|
| Gate opener / operator motor swap | $450-$900 parts and labor |
| Control board replacement | $250-$600 |
| Gate hinge replacement (pair, steel) | $180-$420 |
| Gate post reset / re-set in concrete | $300-$700 |
| Remote / keypad replacement | $75-$225 |
| Safety sensor (photocell) replacement | $150-$350 |
| Full operator replacement (new unit + install) | $1,200-$2,800 |
| Driveway gate installation (single swing, materials + labor) | $3,500-$9,000 |
| Slide gate installation (materials + labor) | $5,000-$14,000 |
Willis pricing skews higher when clay heave has tilted posts enough that resetting them becomes part of the job, and when lake-adjacent corrosion means replacing hardware rather than just lubricating it. Whatever the total, you receive it in writing before we turn a single bolt, and the Kingswell Guarantee covers the repair for 365 days.
Neighborhoods We Serve in Willis
We work throughout Willis and the unincorporated areas around it. Typical response time within city limits is same-day for urgent repairs and within one to two business days for scheduled work, depending on call volume.
- Lake Conroe Hills
- Landing at Lake Conroe
- Shepard Hill Road area
- Browder Traylor Road corridor
- Worsham Street and Old Town Willis
Service Area – Cities Near Willis
From Willis we also run calls into the surrounding Montgomery County communities. Many of our Willis customers have rental properties or family nearby who need gate service, so we keep trucks rolling through the area. See our coverage in Conroe, TX, Pinehurst, TX, Tomball, TX, and Spring, TX.
Serving Willis, TX - Our Local Coverage Area
We’re based in the Willis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Willis
Yes. A live person answers (940) 412-7340 24 hours a day, 7 days a week, including holidays. No voicemail tree, no answering service that says they’ll call you back. When your gate is stuck open or won’t close at midnight, you talk to a person who can dispatch someone to Willis.
Permit requirements in Willis depend on the scope of the work and whether you’re inside city limits or in unincorporated Montgomery County. Repair work like hinge or operator swaps rarely requires a permit. New installations with concrete footings can trigger a permit in some subdivisions. We’re familiar with the local requirements and can tell you what applies to your specific job during the estimate.
No, not without your written approval. The price we quote before starting is the price you pay, unless we find something during the repair that we couldn’t have seen up front. In that case we stop work, show you exactly what’s wrong, and give you a revised written price before continuing. Nothing gets done without you seeing the number first.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Willis Customers Say
"Good repair on a sagging gate and a new hinge welded on. Took them a couple days to get the part in, but they told me that up front and it's been solid since."
- Hector Villanueva"The opener gave out and we were manually pushing the gate for a week. Portcullis got us in quick, swapped the opener, and set up the remotes for both our cars. Great to have it working again."
- Priscilla Nava"Our driveway gate stopped halfway and wouldn't close, which is a problem when it's the only thing between the street and the yard. They came out same day, replaced the motor, and it's smooth again."
- Leonard Pace