Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Electric Gate Repair Nationwide
When an electric gate stops responding to the remote, refuses to close all the way, or groans like it’s dragging a full load of gravel, you need a technician who will actually show up and stand behind the fix. Portcullis Gate Repair has handled residential and commercial Los Angeles Electric Gate Repair and other systems since 2008 as an independently owned Kingswell company. Our background-checked, uniformed technicians arrive in the window we give you, write the price before touching a single bolt, and leave the job site cleaner than they found it. Call (940) 412-7340 any hour and you’ll reach a live person, not a voicemail tree. Every repair carries our written 365-Day Done Right Promise, so if the same problem comes back inside a year, we fix it again at no charge.
Gate Opener Repair
DIY vs Professional Electric Gate Repair: What’s Safe to Do Yourself can help you decide, but when the motorized unit that swings or slides your gate has failed, frozen, or started acting unreliably, professional Gate Opener Repair is what you need. The opener, also called the operator, is the box that houses the motor, control board, and gear assembly that does the heavy lifting. Portcullis Gate Repair fixes these units on site whenever possible, and when a repair won’t hold, we replace the operator with a compatible unit from a brand we trust. Most gate opener repairs run $180-$540 depending on the part and the failure, and you’ll always see the number in writing before we begin.
Common Opener Failures
We replace burned control boards, stripped drive gears, failed capacitors, and worn limit switches on a weekly basis. Each of these parts fails differently, and a ten-minute diagnostic at the start of the visit usually pinpoints the culprit without guesswork.
Repair Versus Replace
If the opener is over twelve years old or the replacement parts exceed half the cost of a new unit, we’ll tell you straight. We quote both options so you can decide with real numbers, and we never push a replacement you don’t need.
Automatic Gate Repair
Automatic Gate Repair covers the full system that opens and closes your gate without you leaving the car, from the operator and remote controls to the safety sensors and the physical track or hinges. When the gate opens but won’t close, closes and immediately reopens, or only works from one remote, the fault can sit in several places at once. Portcullis Gate Repair diagnoses the complete system in one visit rather than swapping parts one at a time, which is how you end up with a six-week-old repair that fails again. Expect automatic gate repair to run $150-$480 for most single-fault fixes, with written pricing before any work starts.
Safety Sensor Troubleshooting
Photo eyes and edge sensors are the components that stop a closing gate when something is in the way. When they misalign or corrode, the gate reverses for no visible reason, and that’s a problem we trace and correct quickly in most cases.
Remote and Receiver Issues
When every remote stops working at once, the trouble is usually in the receiver board or antenna, not the handheld clickers. We test the signal path end to end, and often the fix is simpler and cheaper than a full board swap.
Electric Gate Motor
The Electric Gate Motor is the muscle inside the operator, and when it begins to fail you’ll hear it. A motor that hums without moving, grinds when the gate travels, or overheats and quits after a few cycles has usually worn out its bearings, capacitor, or windings. Portcullis Gate Repair replaces failed motors and the surrounding drive components, then tests the full travel cycle so the gate doesn’t strain the new motor on day one. A motor replacement on a typical residential swing or slide system runs $350-$800 parts and labor, and the price is written and agreed before we order or install anything.
Strain and Cycle Count
A motor dies early when the gate itself binds on a misaligned hinge, a dry roller, or a warped track. During every motor swap we check the mechanical side so the new motor isn’t fighting the same battle that killed the old one.
Actuator Arm Replacement
On swing gates, the actuator is the motorized arm that physically pushes the gate open. We replace actuator units complete, so you get a matched motor and cylinder assembly rather than a misaligned patch-up that loosens in weeks.
Gate Access Control
Gate Access Control is the system that decides who gets in: keypads, intercoms, telephone entry units, card readers, and the vehicle detection loops buried in the driveway. When the keypad stops accepting codes or the intercom rings endlessly without a dial tone, the gate itself may be perfectly fine. Portcullis Gate Repair services and upgrades these systems for both homes and businesses, so a single company handles the whole entry system rather than pointing fingers between vendors. Access control repairs typically run $190-$600 depending on the component, with the written price in your hand before any work begins.
Keypad and Intercom Repair
We replace worn keypad membranes, corroded terminal strips, and failed intercom handsets in the field. Many keypad failures are environmental, water and sun damage being the usual causes, and we mount replacements with better gasketing so they last longer.
Vehicle Detection Loops
When a gate won’t open for a car sitting directly in front of it, the loop detector has usually failed or the saw-cut loop wire has broken. We locate the fault and often restore free-exit function without tearing up the whole driveway.
Commercial Gate Operator
A Commercial Gate Operator runs more cycles in a month than a residential one runs in a year, so it’s built heavier and fails differently. When a commercial operator drops offline, a loading dock, storage yard, or gated community loses its traffic flow, and every hour of downtime matters. Portcullis Gate Repair dispatches technicians who work on commercial operators regularly, including Electric Gate Repair - Huntington Park and surrounding areas, and we stock common parts for several major brands so a single visit often completes the repair. Commercial gate operator repairs run $350-$1,100 for most jobs, and we’ll quote the full scope before any work starts.
High-Cycle Drive Systems
Commercial slide operators use chains, belts, or direct-drive systems that wear at predictable rates. We inspect the whole drive path during every repair, catching a stretched chain or a failing idler before it strands the gate at the worst possible moment.
Boiler Room Diagnostics, Gate Edition
On commercial sites we test incoming voltage, phase, and ground at the operator, because a failing power feed looks identical to a failing motor on the surface. This step alone has saved clients from replacing an operator that only needed an electrician to tighten a lug.
Brands We Service
We’ve serviced LiftMaster residential and commercial operators for years, and we keep the common replacement boards, gears, and remotes for them on the truck. When a LiftMaster unit throws an error code, our technicians read it before tearing into the housing, which saves time and avoids misdiagnosis. DoorKing operators, common on apartment and small commercial entries, are another brand we see daily. We know their telephone entry boards and slide operator quirks well enough to diagnose most faults over the phone before dispatch.
Mighty Mule units show up on farms, acreages, and long driveways everywhere. Their solar and battery systems have particular failure points we’ve learned to check first. Whether you have one of these brands or any other make, we can help.
Signs You Need a Pro Right Now
- The gate reverses after closing. This usually means a safety sensor is misaligned or a closing-force setting is off. It’s also the safest failure to have, but it leaves your property open, and the fix often takes under an hour.
- The operator hums but nothing moves. A capacitor or motor has likely failed. Continuing to press the remote just heats the windings and turns a simple repair into a motor replacement.
- The gate scrapes, jumps, or binds mid-travel. The mechanical side is out of alignment, and every cycle with the misalignment wears the motor harder. Repairing the track or hinge now is far cheaper than a full operator replacement later.
- The keypad or intercom stopped working. You’ve lost the ability to let people in or out, and the gate won’t fix itself. Water intrusion is the usual cause and gets worse every time it rains.
- The gate opened and now won’t move at all. A dead gate in the open position means your property is exposed. A dead gate in the closed position means you’re locked out. Either way, call (940) 412-7340 and a live person will answer.
Our Process, Step by Step
- 1
You call, a person answers. A live dispatcher picks up 24 hours a day, including holidays. You describe the symptom, we ask a few pointed questions about the operator brand and what the gate is doing, and we give you a real arrival window before we hang up.
- 2
We arrive in the window we gave. Our technician shows up in uniform, introduces themselves, and walks the gate with you. You know exactly who is on your property before the truck is in park.
- 3
We diagnose and write the price. The technician tests the operator, the power feed, the safety sensors, and the mechanical side before quoting. You get the price in writing, parts and labor separated, and nothing gets disassembled until you approve it.
- 4
We fix it and test the cycle. The repair is completed, the gate is run through multiple open-close cycles, and the safety reversal is confirmed. We don’t call a job done until the gate operates the way it should under normal use.
- 5
You get the Kingswell Guarantee in writing. Every repair invoice carries our 365-Day Done Right Promise. If the same fault returns within a year, we come back and make it right at no charge. The guarantee is stamped on the paperwork, not implied.
How Much Does Electric Gate Repair Cost?
A typical gate opener repair runs $180-$540, an automatic gate system fault usually lands between $150 and $480, and an electric gate motor replacement is typically $350-$800 parts and labor. Access control repairs sit in the $190-$600 range, while commercial gate operator work starts around $350 and can reach $1,100 for involved repairs. These are honest ranges for the national market we serve, and your exact price depends on the operator brand, the age of the system, and what the technician finds on arrival.
What moves the price is mostly the part, not the labor. A control board for one brand costs more than a full gear assembly for another, and we quote the actual part number so you can verify it. You avoid overpaying by hiring a company that writes the price before the work starts and separates parts from labor on the quote. Every estimate we give is free and includes the full scope: the fault, the fix, the parts, and the time. No diagnostic fee traps, no “while we’re in there” additions without your written approval.
Where We Work
Portcullis Gate Repair serves homeowners and businesses across the United States through local crews. Each location is independently owned and operated by people in your area, and every location is bound to the same Kingswell Guarantee: written price, real arrival window, clean job site, and written guarantee on every repair. Wherever you are, the standard is the same.
Frequently Asked Questions About Electric Gate Repair
The Complete Electric Gate Repair Guide for Los Angeles Homeowners covers the same diagnosis and correction of faults in the motorized system that opens and closes a gate automatically. It covers the operator, the electric gate motor, the remote controls, safety sensors, keypads, and the mechanical track or hinges. We repair all of these components, not just the motor, so one visit usually resolves the problem.
Most single-fault repairs, like a failed capacitor, a misaligned sensor, or a dead remote receiver, take under two hours on site. Motor and operator replacements run half a day on average, and commercial jobs with multiple failure points can take a full day. We’ll tell you the expected time on the phone when you call, and the written quote includes the time estimate.
Residential repair work typically runs $150 to $800 depending on the part, with access control and opener faults at the lower end and motor replacements at the higher end. Commercial operator work runs $350 to $1,100. You’ll receive the exact price in writing before any work starts, so the number you approve is the number you pay.
Yes, we service LiftMaster, DoorKing, Mighty Mule, and six other major gate operator brands. Our technicians carry common replacement parts for these brands on the truck, and they know the specific failure patterns of each one. If your operator is a less common brand, we can still help.
We keep same-day availability for emergencies like a gate stuck open or fully closed, because a broken gate is a security problem, not a convenience problem. When you call (940) 412-7340, a live person answers right away and can usually schedule a technician for the same day. Our arrival windows are real commitments, not estimates.
Every repair comes with the 365-Day Done Right Promise, which is a written guarantee stamped on your invoice. If the same repair fails inside one year, we return and correct it at no charge. The second visit is free, the parts are free, and the labor is free.
Make sure the gate area is accessible and clear of vehicles, and if you can, note the brand and model of the operator before we arrive. Write down what the gate does when it fails, how often it happens, and when it started. You don’t need to have anything disassembled or unhooked; our technician handles that after the written quote is approved.
Schedule Your Electric Gate Repair Service Today
Call (940) 412-7340 and a live person will answer, day or night. We’ll schedule a technician for a real arrival window, diagnose the fault on site, and put the price in writing before any work begins. The estimate is free, and every repair is backed by the 365-Day Done Right Promise.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving customers nationwide since 2008.