Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Crowley
Electric gate repair in Crowley typically runs $180-$340 for most opener and sensor fixes, and we can usually have a technician at your property within 24-48 hours. If your gate is stuck open, stuck shut, or only moves halfway, you’re not just losing convenience, you’re losing the security your gate was built for. Most Crowley calls we handle are swing gates on ornamental iron driveways that have been knocked out of alignment by the shifting clay soil under Tarrant County. Call (940) 412-7340 and tell us what your gate is doing. We’ll give you a straight answer and a real price range before we ever send a truck.
We know Crowley’s gated drives and shared entries because we work them every week, from the Stonebridge Estates streets off Crowley Road to the newer subdivisions west toward Chisholm Trail Parkway. Our technicians arrive in uniform, background-checked, and with the right parts for the operator brand on your property. Every repair starts with a written price before any work begins, and every invoice carries the written 365-Day Done Right Promise. That’s the Kingswell Way, and it’s non-negotiable for us.
Why Portcullis Gate Repair Is Crowley’s Preferred Electric Gate Repair Company
Crowley homeowners have told us the same story often enough that we know it by heart: a gate company says they’ll come Tuesday, Tuesday passes, the voicemail is full, and the gate still doesn’t work. That erosion of trust is exactly what we work against. Portcullis Gate Repair is an independently owned Kingswell company, held to the same four Kingswell Guarantee promises on every job: a written price before any work starts, a real arrival window, a clean job site, and a written guarantee on the repair. We don’t make those promises casually. They’re printed on every invoice and they’re enforceable.
Since 2008, Portcullis has handled gate repair and installation across the DFW metro as a Kingswell company. In Crowley specifically, we’ve built a reputation around showing up when we say we will and leaving the gate closing flush when we’re done. Our customers in neighborhoods like Stonebridge Estates and the HOA-governed subdivisions along Crowley-Plano Road tend to care less about the lowest bid and more about whether the company answers the phone. We answer around the clock. A live person, not a phone tree. That’s part of the Kingswell Way, and it matters even more in Crowley where so many homes share the same aging gate hardware installed in the same buildout window.
Gate Access Control in Crowley
Gate Access Control in Crowley covers every part of the system that decides who gets in: keypads, remote controls, vehicle loop detectors, intercom buzzers, card readers, and the access control board that ties them together. In Crowley’s HOA-governed subdivisions, a shared entry gate often serves a whole street, and a single failing loop detector or keypad means every resident suddenly can’t get home the way they expect. We service the complete access chain, from the keypad at the drive to the operator on the post, and we coordinate repairs through the management company so the board knows exactly what was done and what it cost.
Keypad and Loop Detector Repair
A dead keypad or a loop detector that no longer senses a vehicle is the most common access complaint we hear in Crowley. The fix usually runs $150-$260 per component for replacement and programming, depending on whether it’s a standalone keypad or part of a bigger phone-entry system. We diagnose first, quote the repair in writing, and never start disassembly without your approval on price.
Shared Entry System Coordination
When a common driveway gate fails in a Crowley subdivision, the HOA typically needs a written scope of work before approval. We provide that. We document what’s failed, what the replacement is, and what it costs, so the board can move the repair forward without a second opinion call. Multi-home service runs on a single street are common for us because the hardware ages on the same schedule.
Commercial Gate Operator in Crowley
Commercial Gate Operator in Crowley means the larger, heavy-duty motor and drive assembly that powers slide gates, cantilever gates, and high-cycle swing gates at apartment complexes, churches, warehouse lots, and school campuses. These operators see more cycles in a month than a residential gate sees in a year, so wear on drive chains, limit switches, and motor capacitors shows up faster. A commercial operator replacement in Crowley typically runs $1,200-$2,800 installed, depending on the operator type and the existing gate’s condition. Diagnostics are straightforward and a written quote always comes before any work begins.
High-Cycle Motor and Drive Service
Slide gate operators on commercial properties often fail because the drive chain stretches and the limit switches drift out of adjustment. We service Viking and BFT commercial operators regularly, along with FAAC and Linear. Our techs carry common drive belts, limit switches, and control board components for these brands, so most commercial calls in Crowley finish same-day or next-day once we diagnose.
Gate Safety and Entrapment Compliance
UL 325 compliance is not optional for commercial gate operators in Texas. If a gate has moved out of compliance or the photo eyes were never wired properly, we correct that as part of any operator repair. A gate that reverses on a false obstruction or fails to stop is a liability, not an inconvenience. When we swap a commercial operator in Crowley, we verify the entrapment protection as part of the written scope, not as an upsell.
Trusted Brands We Service in Crowley
Our Crowley technicians are trained across nine gate-operator brands, and on this side of Tarrant County we most often see LiftMaster, FAAC, and BFT on residential drives, with Viking and Linear on commercial lots. We keep common replacement parts for these brands on our trucks: remote controls, keypads, limit switches, capacitors, and control boards. That means fewer second trips and faster turnaround for Crowley homeowners and property managers who can’t wait a week for a part to ship. If your operator is a brand we service, the tech arriving at your Crowley address already knows the system. If it isn’t, we’ll tell you that too.
Common Electric Gate Repair Problems We See in Crowley Homes
- Gate post heave from expansive clay. Crowley sits on Tarrant County’s shrink-swell clay. When spring rains soak the ground, the clay swells and lifts posts and footings. When summer droughts bake it, the clay shrinks and the post tilts. A gate that closed cleanly in October might bind hard by March.
- HOA approval stalls on panel and finish matching. Crowley subdivisions typically require gate style, height, and finish to match the original. A damaged iron panel replaced with a non-conforming one gets rejected. We help with the documentation and installation of matching parts so the repair doesn’t drag out across two board meetings.
- Shared entry system failures that hit whole streets. Because a handful of DFW contractors installed nearly identical automated iron gates in Crowley’s 2005-2015 subdivisions, one loop detector or access control board reaching end-of-life sends every resident on the block calling in the same week.
- Hard-freeze damage to operator housings. The 2021-style deep freezes cracked more than a few Crowley gate operator housings and seized hinge hardware that was never spec’d for sustained sub-zero temperatures. We see the aftermath every winter: split housings, brittle wiring, and stuck swing arms.
Pricing for Electric Gate Repair in Crowley, TX
Here’s what we tell Crowley homeowners before they commit. Most residential gate opener repairs fall between $180 and $340. Keypad or remote receiver fixes run $150-$260. A full swing-gate actuator swap, the motorized arm that physically pushes the gate open, typically runs $550-$850 parts and labor. Commercial operator replacements range $1,200-$2,800 depending on weight rating and drive type. Post re-setting on a heaving clay footing adds $300-$600 when it’s needed. Every one of these numbers in Crowley is quoted and agreed in writing before a single bolt is turned. No technician starts disassembly until you’ve seen the price. Estimates are free. Call (940) 412-7340 and we’ll give you a real range over the phone.
We Also Serve Cities Near Crowley
Our Crowley crews regularly work neighboring communities in southern Tarrant County. If you’re in Burleson, Joshua, Kennedale, or Arlington and your gate is acting up, the same Kingswell Guarantee applies: written price, real arrival window, clean job site, and a written guarantee on the repair. We dispatch from our Dallas-Fort Worth office, so coverage across the Crowley area is steady and predictable. For the full picture on our service area, see Electric Gate Repair in Crowley.
Serving Crowley, TX - Our Local Coverage Area
We’re based in the Crowley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Crowley
In most Crowley subdivisions, yes if the repair changes the gate’s appearance: new panels, different finish, changed height, or a replacement operator housing that’s visible from the street. Matching the existing style and finish usually keeps you clear of the approval process. We can document the repair scope for your management company and source conforming parts. Call (940) 412-7340 and we’ll help you figure out whether your specific fix needs board sign-off.
Because your gate posts sit in Tarrant County’s expansive shrink-swell clay, which heaves and shifts seasonally. Spring moisture swells the clay and lifts the post; summer drought shrinks it and the post tilts. The wet-dry cycle throws the hinges, the operator limit settings, and the closing alignment off gradually, so the gate binds or gaps. Re-setting the post to the correct depth for Crowley’s soil is the durable fix, and we see the same pattern door to door in the 2005-2015 subdivisions. Call (940) 412-7340 for an exact assessment.
Yes, and in Crowley we often do. The westside and southside subdivisions were platted so densely with identical automated iron gates installed by a few DFW contractors that one street can have a dozen gates failing on the same wet-dry schedule. We coordinate multi-home service through the HOA or management company, and the written price on each home’s invoice stands on its own. If several neighbors are calling about the same binding or stuck-gate problem, the fault is usually the same clay-heave misalignment repeating house to house.
We service nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Crowley residential work, LiftMaster and FAAC show up most often on swing gates, with BFT on slide gates. On commercial lots, Viking and Linear are common. Our techs carry parts for all of them, so the brand on your Crowley property is almost certainly one we know. Call (940) 412-7340 and tell us what operator you have; we’ll confirm coverage and give you a rough idea of repair cost before scheduling.
Yes. UL 325 requires entrapment protection on automated gates, typically photo eyes that detect an obstruction and reverse the gate, plus a functioning reverse mechanism on the motor. If your gate doesn’t reverse on contact or the sensors were never wired, that’s a safety violation, not a minor issue. We bring every gate we repair in Crowley into UL 325 compliance as part of the written work scope, and we verify the entrapment protection when we finish. Call (940) 412-7340 if you’re unsure whether your gate meets the standard.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Crowley since 2008.
When your gate won’t close or your shared entry is down, don’t let it sit. A gate left half-open is an invitation. Call (940) 412-7340 for a free estimate and a written price before any work starts. We answer live, around the clock, and we’ll give you a straight answer about what’s wrong and what it costs to fix. That’s the Kingswell Way, and it’s what every Crowley customer gets from the first call to the final test cycle.