Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Dallas
A dead gate operator in Dallas rarely waits for a convenient moment. It fails on the morning you’re already late, or the evening the gate refuses to close and your driveway sits open to the street. We fix that. Portcullis Gate Repair dispatches background-checked, uniformed technicians across Dallas every day, from Preston Hollow to Lake Highlands to Far North Dallas. Most electric gate motor and access control repairs in Dallas run $225 to $480 parts and labor, and we put that number in writing before a single bolt comes off the hinge. Call (940) 412-7340 and a live person answers, 24 hours a day, not a voicemail tree.
Why Portcullis Gate Repair Is Dallas’s Preferred Electric Gate Repair Company
Dallas homeowners have dealt with every kind of gate company. The one that never showed. The quote that doubled at the door. The repair that failed six weeks later. We built Portcullis Gate Repair in 2008 as a Kingswell company specifically because that pattern is so common here. Every Portcullis location is independently owned and operated, but held to the identical Kingswell Guarantee: a written price before any work starts, a real arrival window, a clean job site, and a written guarantee on every repair. Not a franchise promise. A written one.
Dallas customers tell us the same thing repeatedly: they called us second, after someone else already failed. That’s fine. We’ve earned a strong local reputation in Dallas the slow way, by answering the phone and then doing what the invoice said we’d do. Our technicians drive Dallas streets daily, from Royal Lane to Northwest Highway to Buckner Boulevard, and they arrive knowing the operator brand on the property before the truck pulls up. When you call, you get a real person around the clock, including weekends and holidays. When we show up, you know exactly who’s at your gate.
Electric Gate Motor in Dallas
An electric gate motor in Dallas endures a specific kind of abuse: weeks of 100°F+ heat, black clay soil that shifts under the post, and the occasional hard freeze that cracks boards overnight. Replacing or repairing a swing-gate motor in Dallas typically runs $300 to $520 parts and labor. Slide gate motors run slightly higher, $380 to $680, because the gear assembly and rack take more abuse from the soil movement this city is known for.
Swing Gate Motor Repair and Replacement
We arrive with the right tools for your operator, whether it’s a LiftMaster LA400 on a residential swing gate in Lake Highlands or an Elite unit bolted to a 900-lb ornamental iron gate in Preston Hollow. The job involves pulling the actuator, the motorized arm that physically pushes the gate open, testing the travel limits, and checking whether the post that holds the operator has moved. In Dallas, that last step matters more than anywhere else we work.
Slide Gate Motor and Gear Assembly
Slide gates across North Dallas and Far North Dallas tend to be retrofits on 1970s and 1980s brick ranches. The motors themselves are durable, but the gear assemblies wear unevenly when the concrete pad underneath shifts with the clay. We replace the gear, re-bed the operator plate if needed, and set the travel stops so the gate doesn’t slam the end bracket every cycle.
Gate Access Control in Dallas
Gate access control in Dallas means everything that tells the gate to open: keypads, remotes, intercoms, loop detectors, and the control board that ties them together. A full access control repair in Dallas typically runs $120 to $340 for keypad or remote troubleshooting, and $280 to $550 for control board replacement, depending on the operator brand and how many entry points you’re running.
Keypads, Remotes, and Intercoms
When a Dallas homeowner says the gate works fine from the remote but the keypad does nothing, we start at the keypad itself, then the wiring, then the board. Winter Storm Uri killed more keypad electronics across Dallas in February 2021 than any other single event we’ve seen, because moisture froze inside the seals and cracked the circuit traces. We replace the keypad, seal the new one properly, and confirm the code you program actually opens the operator the first time.
Loop Detectors and Entry Sensors
Most Dallas driveways with automatic gates use an induction loop buried in the concrete to sense a vehicle. When the loop fails, the gate won’t open automatically for exiting traffic, or it closes on a car that’s still over it. We locate the loop with a detector tester, cut and splice the new loop, and re-tune the detector to the board. It’s common on gated estates in Preston Hollow and Devonshire where two or three separate entry paths all feed into one operator.
Trusted Brands We Service in Dallas
Our techs carry certification and field experience across nine operator brands, and for Dallas specifically we stock the parts that fail most in this climate. LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite operators run through our service vans daily. When your Elite board burns out in a Dallas summer or your Viking keypad dies after a hard freeze, we often have the replacement part on the truck, not “on order.” That means one visit instead of two.
Common Electric Gate Repair Problems We See in Dallas Homes
- Post heave from Blackland Prairie clay. The soil under the hinge post swells in spring and contracts in summer drought, tilting the post and throwing the operator arm out of alignment. The gate binds or reverse-faults mid-travel, and no amount of re-programming fixes it until the post is re-set in fresh concrete.
- Board and seal failures from 100°F+ heat. Dallas summers bake control boards inside operator housings, and melt grease out of gear assemblies on LiftMaster and Elite units. A board that works in May can be dead by August.
- Freeze damage to keypads and boards. The February 2021 winter storm froze moisture inside keypad seals and cracked control boards across the entire Dallas metro. Some gates stayed stuck open. Others went completely dead until both the board and the entry pad were replaced.
- Misaligned safety sensors. UL 325 entrapment protection sensors near the gate’s edge get knocked out of alignment by heat-warped brackets or shifted posts, causing the gate to refuse to close. We re-align or replace them and test the full reverse function before we leave.
Pricing for Electric Gate Repair in Dallas, TX
We Also Serve Cities Near Dallas
If your gate is in Irving, Duncanville, Balch Springs, or Mesquite, we cover those too. The soil under those cities is the same Blackland Prairie clay, the summers are just as hot, and the operators are the same brands. Our Electric Gate Repair team covers the full Dallas metro, and you can read more about our local coverage on the Dallas page.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Dallas
Why does my Dallas gate keep reversing or binding even after the operator was re-programmed?
Because the problem is rarely in the operator. Dallas sits on Blackland Prairie clay that swells with spring rain and contracts through the summer drought, and that cycle tilts the hinge post enough to pull the arm past its travel limit. The gate binds at the 45-degree mark or reverses mid-travel, and the fix is re-setting the post footing in concrete, then re-aligning the operator arm. Re-programming alone doesn’t hold through a Texas summer. Call (940) 412-7340 and we’ll tell you after one visit whether it’s a post problem or a motor problem.
What happens to my gate operator during a Dallas summer?
Two things, mostly. The heat degrades circuit boards inside the operator housing, and it melts grease out of gear assemblies. On hydraulic units, rubber seals crack. We replace a lot of boards in Dallas between June and September, especially on LiftMaster and Elite units mounted in full sun on the west side of a property.
My keypad and intercom stopped working after a hard freeze-was that Winter Storm Uri?
Almost certainly. February 2021 froze moisture inside keypad seals across Dallas and cracked circuit traces on boards throughout the metro. If your gate still opens from a remote but the keypad is dead, the keypad electronics are the usual culprit. If the entire gate is dead, the control board likely took the hit too. We can diagnose either in one visit and usually have the replacement part on the truck.
How do I know if my gate has proper UL 325 entrapment protection?
UL 325 requires the gate to reverse when it encounters an obstruction, and it must fail safe, meaning if the sensor is blocked or disconnected, the gate won’t close at all. If your gate closes on a trash can or a child’s bike and keeps pushing, that’s a failed entrapment protection system. We test the full reverse function on every repair in Dallas, and we’ll tell you in writing whether it passes or not. This isn’t optional equipment. Call (940) 412-7340 if your gate is closing hard on anything.
Can you service a heavy custom ornamental iron gate in Preston Hollow or University Park?
Yes. We were called to a Preston Hollow estate on Meadowbrook Drive where a 1,200-lb custom ornamental iron swing gate was reversing mid-travel at the 45-degree mark. The original installer tried re-programming the LiftMaster operator twice. We found the hinge post had heaved nearly 2 inches out of plumb from the summer drought. After re-plumbing and re-setting the post footing in concrete, we re-aligned the operator arm and the gate ran silently through a full open-close cycle for the first time in eleven weeks. That’s the job we do regularly in Preston Hollow and the Park Cities.
Call Portcullis Gate Repair for Electric Gate Repair in Dallas
When your gate stops working, you want a real person on the phone and a real technician in your driveway, with the price in writing before work starts. That’s how we’ve operated since 2008. Dean Prescott leads our team, and every job carries the 365-Day Done Right Promise: if the repair fails inside a year, we come back and make it right at no charge. Written on the invoice. Not a verbal promise. Call (940) 412-7340 for a free estimate on electric gate repair anywhere in Dallas.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Dallas since 2008.