Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Pecan Plantation
Electric gate repair in Pecan Plantation typically runs $180-$540 for most service calls, with operator swaps on swing gates landing between $650 and $1,400 parts and labor. We know the two-tier gate reality here better than anyone: the POA-manned entry checkpoints that ring the community, and the private ornamental iron and ranch-style gates behind them. If your gate is grinding, stalling, or refusing to open, call (940) 412-7340 and you’ll reach a live person who can schedule a technician for Pecan Plantation.
Our crews work inside Pecan Plantation regularly, which means we already know the drill at the guard station. We check in, get cleared, and head to your property without wasting your afternoon. Dean Prescott runs our Pecan Plantation service area with a simple rule: write the price down before touching a single bolt.
Why Portcullis Gate Repair Is Pecan Plantation’s Preferred Electric Gate Repair Company
Pecan Plantation homeowners have dealt with enough gate companies that no-show, inflate the quote at the door, or disappear after a failed fix. That’s exactly why Portcullis Gate Repair operates the way we do. We’re an independently owned Kingswell company, and every job carries the same four Kingswell Guarantee promises: a written price before any work starts, a real arrival window, a clean job site, and a written guarantee on the repair.
When homeowners in Pecan Plantation call us, they get a live person on the phone, not a voicemail tree. Our technicians arrive in uniform, background-checked, and they’ve already been briefed on which operator brand is on your gate before the truck pulls in. That matters when you’ve got a Viking slide gate operator on a 700-foot driveway or a FAAC swing actuator on a custom iron gate that weighs more than a pickup.
Most important: every repair we complete in Pecan Plantation carries the 365-Day Done Right Promise. If it fails inside a year, we come back and fix it at no charge. That promise is stamped on your invoice in writing, not implied.
Gate Access Control in Pecan Plantation
Gate Access Control in Pecan Plantation means more than the operator that swings the gate. It’s the full entry system: the keypad, the intercom, the vehicle detection loops, the safety photocells, and the receiver that talks to your remotes. In a community where the front gate already filters visitors, the access system at your own driveway is the second line of control, and when one component fails, the whole entry sequence can break down.
Keypad and intercom integration
We see a lot of older access systems inside Pecan Plantation where the keypad works fine but the intercom feed to the house has gone dead, or the receiver range has shrunk so much that remotes only work from ten feet away. A typical keypad replacement runs $180-$420; adding or replacing an intercom module usually lands between $350 and $700 depending on whether we’re reusing existing wiring or running new low-voltage line.
Vehicle detection loops and photocells
Long driveways and rural-style lots mean Pecan Plantation gates rely heavily on loop detectors and photocells to know when a vehicle is present or when something is in the path of the gate. When a loop fails, the gate either won’t close behind you or won’t open at all until you press the remote. Loop detector replacement and re-cutting the saw slot runs $250-$500 on most residential driveways here.
Commercial Gate Operator in Pecan Plantation
A Commercial Gate Operator in Pecan Plantation context isn’t just for businesses. The fly-in section of the community includes hangar-adjacent properties with large motorized hangar and equipment gates, and the POA itself operates the manned entry checkpoints around the perimeter. These are heavier-duty systems than a standard driveway operator, and they demand a different service approach.
Heavy-duty operators for hangar gates and equipment access
We’ve replaced operators on hangar gates in the Pecan Plantation fly-in section where the gate panel alone weighs over 800 pounds. A commercial-grade slide operator swap on a gate that size typically runs $1,200-$2,400 parts and labor, depending on whether it’s a Linear or FAAC unit and whether the rack and pinion also needs replacing. These jobs are scheduled and quoted in advance, with a written price before we order parts.
POA perimeter gate coordination
Any work on the community’s own entry gates requires prior authorization from the Pecan Plantation POA. That’s not optional, and it’s not something every gate company working out of Granbury or Weatherford handles efficiently. We coordinate that authorization as part of our service, so you’re not left waiting on the wrong crew while your gate sits half-open at the guard station.
Trusted Brands We Service in Pecan Plantation
Our technicians come certified and experienced on nine major gate-operator brands, and for Pecan Plantation we keep parts on hand for the ones we see most often: FAAC swing actuators on ornamental iron gates, BFT operators on older estate systems, Linear slide operators on ranch-style gates, and Viking units on commercial and hangar applications. We stock common control boards, capacitors, and safety sensors locally, so most repairs on these brands are completed same-visit rather than ordered out and scheduled weeks later. If your operator is a LiftMaster, Ghost Controls, DoorKing, Elite, or Mighty Mule, we carry those too.
Common Electric Gate Repair Problems We See in Pecan Plantation Homes
- Clay-soil post heave pulling gates out of plumb. Hood County sits on expansive shrink-swell clay that heaves when it rains and contracts in drought. A gate post that moves even half an inch throws a swing gate out of alignment, and the operator burns out trying to push a panel that no longer swings true. We fix this by re-setting the post footing or adding bracing, then re-leveling the panel and replacing any damaged rack or gear teeth.
- Solar opener failures in the 100°F summer heat. Plenty of Pecan Plantation driveways run solar-powered or battery-backup operators because the lots are large and trenching power to the gate is expensive. But Hood County summers regularly top 100°F, and that heat bakes capacitors and degrades rubber seals fast. A solar opener that worked fine in spring can be dead by August because the battery can’t hold charge and the control board has heat damage.
- Oversized gates on undersized operators. Custom-fabricated ornamental iron gates and heavy ranch-style slide gates look great but weigh far more than their operators were sized for. We regularly see slide gates where the operator is working at 120% of its rated capacity, which causes repeated safety photocell faults and premature motor failure. The fix is usually a properly sized operator, not another band-aid repair.
- Safety photocell and entrapment protection faults. Automatic gates in Pecan Plantation have to meet UL 325 safety standards, which means working photocells and edge sensors. When those fail, the gate either refuses to close or reverses unpredictably. We diagnose the fault and replace the sensor or re-run the wiring, and we won’t bypass a safety feature just to get the gate moving.
Pricing for Electric Gate Repair in Pecan Plantation, TX
Here’s what you can expect to pay in Pecan Plantation for common electric gate repairs. A service call to diagnose a gate that won’t open runs $85-$125, and that fee is credited toward the repair if you proceed. Gate motor replacement on a typical swing gate runs $650-$1,400; slide gate operator swaps land between $900 and $2,400 depending on panel weight and brand. Keypad replacement is $180-$420, remote reprogramming and receiver swap is $120-$300, and safety sensor replacement runs $150-$350 per sensor. Every price is written down and agreed to before work starts. Call (940) 412-7340 for a free estimate.
We Also Serve Cities Near Pecan Plantation
While this page speaks directly to Pecan Plantation homeowners, our Electric Gate Repair team also serves communities across North Texas. If you own property near Pecan Plantation but outside the gates, or you know someone in Houston, San Antonio, Dallas, or Fort Worth who needs gate service, our crews handle those areas too. Same standards, same written guarantee.
Serving Pecan Plantation, TX - Our Local Coverage Area
We’re based in the Pecan Plantation area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Pecan Plantation
We can work on both, but they’re handled differently. Private driveway gates and estate gates inside Pecan Plantation are standard service for us; we clear the guard station like any other contractor and head to your property. The POA-manned entry gates around the community perimeter require prior authorization from the POA before any repair work can begin. We coordinate that authorization as part of the job. Call (940) 412-7340 and tell us which gate you’re calling about.
The most likely culprit is the shrink-swell clay soil under your gate posts. Pecan Plantation sits on expansive clay that heaves during wet seasons and drops during drought, and that movement shifts gate posts just enough to throw a swing gate out of plumb. Once the panel is out of alignment, the operator has to work harder to move it, and you start seeing grinding, stalling, or stripped gears. Re-setting the post footing with proper drainage and compaction is the long-term fix. We can assess whether your gate needs a footing repair or a realignment.
Not necessarily. A sagging ornamental iron gate usually means the hinge post has moved or the hinges themselves have worn, not that the operator is bad. But if the gate has been running misaligned for a long time, the operator may have already sustained gear damage trying to compensate. We diagnose the post, the hinges, and the operator together, and we only replace what actually needs replacing. A typical gate realignment with hinge replacement runs $350-$700.
Every automatic gate in Pecan Plantation should have working safety photocells and edge sensors that reverse the gate when something is in its path, per UL 325 entrapment protection requirements. For swing gates, that means photo eyes positioned to cover the gate’s full arc. For slide gates, it means photocells across the gate opening plus contact edges. We test entrapment protection on every repair visit, and we won’t leave a gate running without working safety sensors.
Yes. Solar and battery-backup operators are common in Pecan Plantation because many lots have long driveways where running AC power to the gate isn’t practical. We service the panel, the charge controller, the battery bank, and the operator itself. In Hood County summers, heat damage to capacitors and batteries is the main failure point, so we test output under load, not just idle voltage. Call (940) 412-7340 for a free estimate on solar gate opener repair.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Pecan Plantation homeowners since 2008.