Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Dallas
A new gate installation in Dallas runs $1,800-$7,500 for most residential slide or swing gates, including the operator, and the real difference in how long it stays aligned comes down to how the posts are set in our black clay soil. We build every Dallas installation around that soil, because it swells and contracts enough each year to tilt a shallow footing out of plumb inside a single season. Our crews work neighborhoods from Preston Hollow to Lake Highlands every week, so we know what a heavy ornamental gate on this ground actually demands. Call (940) 412-7340 for a free estimate on any gate installation in Dallas.
Why Portcullis Gate Repair Is Dallas’s Preferred Gate Installation Company
Since 2008, Portcullis Gate Repair has operated as a Kingswell company, and Dallas homeowners keep calling us back because we put the price in writing before a single bolt is turned. Every installation carries the 365-Day Done Right Promise: a written guarantee that if the gate fails within a year, we return and correct it at no charge. That matters more in Dallas than most places, given how our soil treats gate posts.
We answer the phone with a live person around the clock, and our Dallas customers get a real arrival window, not a vague “sometime between 8 and 6.” Dean Prescott has built our Dallas-Fort Worth operation around one principle: the gate trade runs on trust, and trust runs on showing up when we say we will, with a price that does not change at the door. Our technicians are background-checked and arrive in uniform, so you know exactly who is walking up your driveway in Preston Hollow or the Park Cities.
Automatic Gate Installation in Dallas
Automatic Gate Installation in Dallas means pairing a heavy ornamental or ranch-style gate with an operator that can take our heat and our clay for years, not months. The job typically includes setting the gate posts and operator pad, mounting the actuator (the motorized arm that physically pushes or pulls the gate open), running the power and safety loops, and programming travel limits. For most Dallas homes, an automatic swing or slide gate installation runs $3,200-$7,500 depending on gate weight, operator type, and whether we are running low-voltage wire across a long driveway. You will get the full price in writing before we start.
Setting Posts That Hold in Black Clay
This is the part nobody sees and the part that decides whether the gate still works come July. We excavate deep and set posts below the active clay zone, then tie the footing into stable soil so the seasonal swell does not heave the hinge post. It adds labor up front, but it is why our Preston Hollow and University Park installs do not come back out of plumb the first summer.
Matching Operator Systems Early
The right operator depends on gate weight and how the driveway sits. A heavy double swing gate on a downward-sloping drive in North Dallas needs more torque than a light single swing on flat ground, so we size the actuator accordingly and set travel limits with room for winter contraction. We service LiftMaster, Linear, Viking, Ghost Controls, and DoorKing systems, so the technician arriving already knows the board on your property.
Gate Installation Services in Dallas
Gate Installation Services in Dallas cover everything from a single ornamental pedestrian gate to a full driveway security gate with matched entry. Most Dallas calls start as a security upgrade: a homeowner along a collector street in Lake Highlands or Far North Dallas wants a gate across the drive that locks the street side at night. A pedestrian gate alone typically runs $1,200-$3,500 installed; a full double driveway gate with automation lands between $4,000 and $7,500. Every quote is written and agreed before we order any steel, and you see the line items.
Security Gate Packages for Dallas Homes
A security gate usually pairs a steel or ornamental iron gate with a keypad, a vehicle sensor loop, and sometimes a camera tie-in. We pull the low-voltage wire, set the sensor loops in the drive, and program the operator’s obstruction sensitivity per current UL 325 standards. On a Preston Hollow estate, that often means coordinating with an existing intercom and camera entry system so the gate, the call box, and the driveway all talk to one system.
Replacing an Old or Undersized Gate
Plenty of Dallas houses built in the 1980s and 1990s have a gate that was retrofitted years ago and has since sagged or stalled. We remove the old panel, cut back the existing posts if they are sound, and set new footings where the old ones have heaved. The result is a gate that swings true and an operator that is not fighting a post that moved three inches since March.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dallas
We carry service parts for the brands Dallas homes actually run: Linear, Viking, Ghost Controls, and DoorKing, along with LiftMaster and a handful of others. That means a middle-of-summer board failure does not leave you waiting a week while a part ships from out of state. Our Dallas-Fort Worth office stocks common control boards, gear kits, and safety edges locally, and we keep the most-worn actuator parts on the truck for faster turnaround in the Park Cities and North Dallas.
Common Gate Installation Problems We See in Dallas Homes
- Posts set too shallow in black clay. A new gate installed by a crew that does not know our soil will heave and tilt after the first wet-then-dry cycle, pulling the gate out of alignment and tripping the operator’s travel limit. We see this most often on gates installed in spring and failing by July.
- Operator boards cooking in summer heat. Dallas routinely sustains 100°F-plus for weeks, which degrades circuit boards and melts grease out of rack and pinion gear assemblies. A freshly installed automatic gate can begin to bind or stall mid-season if the operator runs hot and under-spec.
- Heavy ornamental gates sagging at the hinge. Iron driveway gates in Preston Hollow and the Park Cities are heavy enough that an undersized or improperly anchored hinge post fatigues. The panel sags at the hinge and drags on the drive, and the operator burns out trying to overcome the friction.
- Lightning and surge damage. Summer storms here move fast and hit hard. An automatic gate on an unprotected circuit can lose a control board to a nearby strike, which is why we recommend surge protection on every new Dallas installation.
Pricing for Gate Installation in Dallas, TX
Here is what we quote across Dallas, in writing, before work starts:
- Pedestrian gate: $1,200-$3,500
- Single swing driveway gate with operator: $3,200-$5,800
- Double swing or slide gate with operator: $4,000-$7,500
- Custom ornamental iron gate, heavy estate weight: $6,000-$15,000+
- Operator and safety system only (gate reused): $1,800-$4,200
The big drivers are gate weight, whether we are trenching power across the drive, and whether existing posts are sound enough to reuse. The price you see on the written estimate is the price you pay, and every installation carries the 365-Day Done Right Promise. Call (940) 412-7340 for a free on-site measure and a line-item quote for your gate installation in Dallas.
We Also Serve Cities Near Dallas
Our crews cover the full metro, including Irving, Duncanville, Balch Springs, and Mesquite. If you are just outside the core, you still get the same written price and guarantee. See our Gate Installation in Dallas coverage details or call (940) 412-7340 and tell us your cross streets.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Dallas
We set heavy gate posts 36 to 42 inches deep, below the active swelling zone of Dallas’s Blackland Prairie clay, and we tie the footing into stable soil below the shrink-swell layer. That depth is the difference between a gate that stays plumb through a full wet-dry cycle and one that tilts by late July. Call (940) 412-7340 and we will check your soil and existing footings before quoting.
The black clay under your post has dried and contracted through the summer, tilting the post enough to pull the actuator past its travel limit, so the operator faults even though nothing mechanical broke. Re-programming the limit only masks the problem. The fix is re-plumbing the post on a deeper footing, which is a standard Dallas repair for our crews.
Yes, every automatic gate we install in Dallas meets current UL 325 entrapment protection standards, which means monitored safety edges, photo eyes across the gate path, and a pressure-sensing operator setup. This is not optional, and we will not sign off on an automatic gate without it.
Yes, we regularly tie new custom gates into existing intercom and camera entry systems so the gate, call box, and driveway all operate as one system. Our team can run the low-voltage lines and program the operator to trigger from the same call button the homeowner already uses.
A slide gate generally holds up better here, because it does not hang its full weight on hinge posts in clay that shifts, and because the track keeps the gate moving true even when the ground moves slightly. That said, a properly footed swing gate on a deep post will run quietly for years. Call (940) 412-7340 and we will tell you which design fits your drive and your soil.
Call Portcullis Gate Repair for Your Dallas Gate Installation
You deserve a gate that runs true through Dallas summers and hard freezes, and a written price that does not move after the first bolt is turned. Call (940) 412-7340 for a free on-site estimate, or ask for Dean Prescott’s team. If we can install the gate on your schedule, we will tell you exactly what it costs before any work starts, and we will put the Kingswell Guarantee on the invoice.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Dallas, TX since 2008.