Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Edison
Gate installation in Edison usually starts with one of two situations: a homeowner wants a new automatic driveway gate built and wired from scratch, or a 1980s-era gate has finally outlived its posts and needs a full replacement rather than another patch job. A complete installation here typically runs $4,800 to $14,500 depending on gate size, material, operator, and whether we’re pouring new footings. That’s a real range, not a teaser. We’re Portcullis Gate Repair - Edison, an independently owned Kingswell company, and we give every Edison customer a written price before a single bolt gets turned. Call (940) 412-7340 any hour and a live person picks up.
Why Portcullis Gate Repair Is Edison’s Preferred Gate Installation Company
Edison homeowners call us because we understand what their specific yards do to gates. The township’s clay soils heave every winter. Posts move. Gearboxes overload. If a gate company doesn’t know that pattern, they’ll sell you a motor you don’t need and leave the real problem standing there. Every Portcullis technician is background-checked, uniformed, and trained on FAAC, BFT, Linear, and Viking operators before they ever drive into North Edison or Clara Barton. We serve Edison regularly, so dispatch knows the streets and traffic patterns, not just a map pin. Jobs here are run by Gate Installation crews who work through the Kingswell Guarantee: written price, real arrival window, clean job site, and a written guarantee on every installation.
Automatic Gate Installation in Edison
Automatic Gate Installation in Edison means more than bolting a motor to a post. In this township it means pouring footings deep enough to handle a 36-inch frost depth, setting posts plumb in clay that moves, hanging the gate so it swings true, and wiring the operator with proper entrapment protection. Edison codes require photo eyes and, on most residential installations, a monitored contact edge. We handle all of it. Most automatic gate installations here run $6,500 to $14,500 fully installed, including the operator, safety devices, and concrete work.
Post Setting and Footing Work
Edison’s freeze-thaw cycle heaves shallow footings every winter. We pour below the frost line and use steel post brackets rather than embedding raw post bases in wet concrete. That detail is the difference between a gate that works for ten years and one that needs re-leveling after two.
Operator and Safety Wiring
We wire new operators through dedicated low-voltage conduit, not buried extension cord. Loop detectors, photo eyes, and edge sensors all get tested on site. If you’re replacing an existing operator, we’ll check whether the post lean that killed the last motor is still present before we mount the new one.
Gate Installation Services in Edison
Gate Installation Services in Edison cover the full job from the first measurement to the final walkthrough. We install swing gates, sliding gates, double gates, pedestrian gates, and security gates in every neighborhood from South Edison to the Route 1 corridor. Typical installations here run $4,800 to $11,500 for most residential gates, with the higher end reflecting solid wrought-iron panels, long runs of conduit, or operator upgrades. Every job includes a written quote before work starts.
Swing Gates and Double Gates
Most Edison driveways suit a swing or double-swing configuration. We set the hinges and posts to handle winter ground movement, then hang the panel and fine-tune the travel arc. If you want a wrought-iron look like the ones common along Oak Tree Road, we’ll spec panels that can withstand wind load without sagging at the hinge side.
Sliding Gates and Security Gates
Properties with shorter setbacks often need a sliding gate. That means a steel track bed, proper drainage, and a cantilever setup if ground frost is a concern. Security gates add a heavier frame and stronger operator; we’ll walk you through the options and give you the real numbers for both.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Edison
We install and service operators from FAAC, BFT, Linear, and Viking, and our technicians arrive already knowing the model on your property. Because we work in Edison for years, we stock the common replacement parts for these brands locally and can often complete an operator swap in a single visit. We don’t upsell you into a brand we happen to carry more of. We install what fits your gate, your panel weight, and your driveway layout.
Common Gate Installation Problems We See in Edison Homes
- Post lean from freeze-thaw cycles. Clay soil heaves in winter, and a post that wasn’t set below the frost line shifts out of plumb. The gate starts binding, then the operator gearbox burns out trying to push a gate that’s fighting its own hinges.
- Sagging solid wrought-iron panels. Edison gets real wind, and solid infill gates catch it hard. If the post was even slightly off, wind load bends the panel and fatigues the welds at the hinge stile. You can re-weld the gate, but if the post isn’t corrected it’ll sag again.
- Rotted buried post bases near the Raritan flood plain. Properties in lower-lying sections of Edison hold groundwater year-round. Buried steel posts corrode faster there, and underground conduit for loop detectors and low-voltage wiring fails sooner than in drier nearby towns.
- Aging HOA entry gates along Route 1. Many 1980s and 1990s condo and townhome complexes installed their shared entry gates as a package. Those systems are reaching end of serviceable life together, and board after board is finding that another repair on a corroded frame is throwing money into a gate that needs replacement.
Pricing for Gate Installation in Edison, NJ
Here are real numbers for the Edison market. A single swing gate with a basic FAAC or BFT operator runs about $4,800 to $7,200. A double wrought-iron driveway gate with full automation and safety edges typically lands between $7,000 and $11,500. A heavy sliding security gate with concrete track work can run $9,000 to $14,500. The variables are panel material, gate length, post condition, and how far we need to run conduit and power. You’ll get a line-by-line written quote before any work begins, and that quote doesn’t move on you mid-job. Call (940) 412-7340 for a free estimate.
We Also Serve Cities Near Edison
While this page is about Gate Installation in Edison, our crews regularly cover the surrounding towns. We install and repair gates in Elizabeth, Newark, Bayonne, and Jersey City as well. If you’re just outside Edison and need a real quote and a team that shows up, call us at (940) 412-7340.
Serving Edison, NJ - Our Local Coverage Area
We’re based in the Edison area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Edison
Because in this township the post fails first, quietly, and the motor takes the blame months later. Edison’s clay-influenced soils heave on a seasonal cycle, and a post set in concrete that shifts 2 to 4 inches out of plumb turns every gate cycle into a wrestling match. The operator gearbox strains, the motor overheats, and eventually it burns out. In the Oak Tree Road corridor we see this consistently on 1998 to 2008 FAAC and LiftMaster swing-gate installs. Replacing the motor without re-setting the post means you’ll be replacing it again. Call (940) 412-7340 and we’ll check the post before quoting any operator work.
Every automatic operator has a manual release, and you should know where yours is before you need it. On most FAAC and BFT swing operators there’s a release key or lever on the side of the housing; on Linear and Viking slide operators it’s usually a pull-chain or key release behind a small access cover. Turning the release disengages the motor so you can push the gate by hand. If the power is already out and the gate is mid-travel, release the operator before you try to move it, because you’ll be fighting the gearbox otherwise. Never attempt to force an automatic gate during a power cut without releasing the operator first; that’s how gearboxes get stripped and panels get bent. If you need help releasing a gate safely, call (940) 412-7340 and we’ll walk you through it.
Yes, and it does. Solid or near-solid wrought-iron infill panels act like a sail in a nor’easter. If the hinge posts have even a slight lean from frost heave, the wind load bends the panel and fatigues the welds at the hinge stile. The gate sags, the latch stops catching, and the operator strains against the added friction. Fixing the panel without correcting the post is a temporary repair. We re-set the post, re-hang the gate, and then repair the panel so the whole assembly works together. Call (940) 412-7340 and we’ll come look at it.
New automatic gate installations in Edison must include entrapment protection on both the swinging edge and the closing edge. That means photo eyes mounted at the appropriate height, a monitored contact edge or safety edge on the leading edge of the gate, and proper force settings on the operator. Existing gates being retrofitted with an operator are also required to bring entrapment protection up to current standard. This is not optional paperwork; it’s what keeps a closing gate from injuring a child or a delivery driver. Every installation we do includes these devices and tests them before we leave.
Many of those shared entry gates along the Route 1 corridor were installed as package systems 30 to 40 years ago. The frames are corroded, the post footings are cracked, the operators are obsolete, and the conduit has been patched so many times it’s mostly duct tape and hope. At some point the math stops working: a $2,800 repair on a gate that will fail again next spring costs more over three years than a $9,000 to $12,000 full replacement. Boards that call us often realize they’ve spent the replacement cost twice over in the last decade. We give the board a written condition report and a real installation quote so the decision is honest. Call (940) 412-7340 and we’ll come evaluate the gate.
Call Portcullis Gate Repair for Gate Installation in Edison
We’re an independently owned Kingswell company with one standard: a written price before any work starts, a real arrival window, a clean job site, and a written guarantee on every installation. Our technicians are background-checked and uniformed, and a live person answers the phone 24 hours a day. Scheduling and dispatch for Edison jobs is coordinated from our New York City office, and the crews working in your neighborhood know this township’s soil, frost depth, and gate stock because they work here regularly. If you need a new gate installed, an old gate replaced, or just an honest opinion on whether to repair or replace, call (940) 412-7340. Estimates are free.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Edison with the Kingswell Guarantee since 2008.