Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Mount Vernon
Gate installation in Mount Vernon runs $1,400-$4,800 for most residential jobs, with sliding gates typically landing between $2,200 and $5,200 when an operator and track are included. We’re out to most Mount Vernon addresses within 90 minutes for a free measure and written estimate, and we install on a schedule that fits your driveway, not ours. Call (940) 412-7340 and you’ll get Dean Prescott’s team, a Kingswell company that’s been doing Gate Installation since 2008.
Mount Vernon is not a generic suburban install. It’s Westchester County’s most densely populated city, and its South Side blocks share a border with the Bronx. That means tight lots, shared fence lines, and gates that have to work around rights of way most gate companies never see. We know the difference because we work it every week.
Why Portcullis Gate Repair Is Mount Vernon’s Preferred Gate Installation Company
We work Mount Vernon streets from South Side to Fleetwood to the North Side, and we’ve set gates along Gramatan Avenue, S 4th Avenue, and the numbered blocks off Lincoln Avenue. What we’ve learned on those streets shapes every estimate we write here. Tight curb cuts, shared stoops, and pre-WWII ironwork are the norm in Mount Vernon, not the exception. So our crews show up expecting them.
Every job gets a written price before any work starts, not after the old gate is on the ground. That’s the Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, come back if it fails. And the guarantee is real. Every installation carries the 365-Day Done Right Promise, written on the invoice. If something fails within a year, we return and make it right at no charge. Dean Prescott has run this company on those terms since 2008, and Mount Vernon customers hold us to them.
You’ll also get a live person when you call, day or night. No voicemail trees, no “we’ll get back to you next business day.” If a gate fails at midnight on a holiday, a person answers and a crew gets scheduled.
Sliding Gate Installation in Mount Vernon
Sliding Gate Installation in Mount Vernon is often the only workable option on dense South Side lots where a swing gate’s arc would foul a neighbor’s fence line, a parked car, or a shared driveway easement. A slide gate moves laterally on a track, hugging the property line instead of sweeping into it. On Mount Vernon’s row-house blocks, that’s frequently the difference between an install that passes inspection and one that never should have been specified.
Rack and Pinion Tracks for Tight Lots
The gate rides on a steel rack bolted to the gate frame, driven by a pinion gear at the operator. It’s a clean, low-profile solution that handles Mount Vernon’s narrow side passages well. The track can run along a party-wall fence line where there’s no room for a swing arc.
When a Swing Gate Won’t Fit
We see this all over the South Side near the Bronx border. A homeowner wants an ornamental swing gate to match the 1920s ironwork, but the driveway is nine feet wide and the arc would clip the neighbor’s stoop. Slide gate conversion solves it. We spec the track length, set the operator, and run the wiring so the gate opens parallel to the house instead of into it.
Sliding gate installs in Mount Vernon typically run $2,200-$5,200 including track, operator, and labor. A slide gate with no operator starts around $1,800.
Gate Opener Installation in Mount Vernon
Gate Opener Installation in Mount Vernon means wiring an automatic operator to a swing or slide gate, installing safety photo-eyes, and programming remotes and keypads. On Mount Vernon’s older homes, the electrical side is often underbuilt for a modern operator. Many pre-WWII garages and stoop perimeters have no dedicated circuit, so we run a new one to code before mounting the operator.
Operators That Match the Gate
Swing gates get an articulated arm or underground operator. Slide gates get a rack and pinion operator. We service and install LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so the tech arriving already knows the system on your property.
Photo-Eyes and Edge Sensors Are Not Optional
Any automatic gate operator installed in Mount Vernon must comply with UL 325 entrapment protection. That means photo-eyes or edge sensors that stop and reverse the gate if anything crosses the opening. We’ve been called to fix installs where another contractor skipped this to save time on a cramped row-house driveway. That gate doesn’t pass inspection, and it shouldn’t.
Gate opener installation in Mount Vernon runs $950-$2,800, depending on the operator type and whether a new circuit is needed.
Trusted Brands We Service in Mount Vernon
We keep common parts for Viking, Ghost Controls, and DoorKing operators stocked for Mount Vernon calls, which means a failed control board doesn’t have to wait for a distributor shipment from New Jersey. If your gate runs on one of those three brands, we can often swap a board or limit switch the same day. For Linear, FAAC, BFT, LiftMaster, Elite, and Mighty Mule, we’ll quote the part and the labor honestly, with the exact delivery window before any work is scheduled. No brand gets a generic markup. You’ll see the real number on the estimate.
Common Gate Installation Problems We See in Mount Vernon Homes
- Salt-eaten hinge posts set in heaved concrete stoops. Mount Vernon’s streets get heavy road salt through the winter, and that salt migrates into stoop aprons and post footings. A new gate bolted to an old, spalled concrete stoop will rack within a year because the footing is moving and rusting from the inside.
- Shared party-wall fence lines with no room to maneuver. On South Side blocks near the Bronx border, a new gate post often ties into a concrete footing shared with the adjoining row house. Setting a fresh footing can mean coordinating with the neighbor, and a crew that ignores that risks cracking a shared wall.
- Swing gates specified where no swing arc exists. A driveway with a nine-foot width and a neighbor’s stoop six feet across the line cannot take an eight-foot swing leaf. We convert these to slide gates before the first hole is dug, not after the gate bangs into the neighbor’s fence.
- Photocells skipped on cramped retrofits. When two attached row houses leave only inches of working space, a rushed crew might leave the photo-eyes off an automatic gate operator. We don’t. UL 325 entrapment protection goes on every automatic gate we install in Mount Vernon, and we test it before we leave.
Pricing for Gate Installation in Mount Vernon, NY
A straightforward ornamental swing gate for a front stoop or sidewalk entrance runs $1,400-$2,600, including the gate, new posts, and setting hardware. Driveway gates run higher: $2,200-$4,800 for a single swing driveway gate, and $2,200-$5,200 for a slide gate with track and operator. A double driveway gate in Mount Vernon typically lands between $3,800 and $7,500, and a gate opener alone runs $950-$2,800 installed. Factors that move the number: the width and material of the gate, whether the old concrete footing has to come out and be replaced, whether the job is on a shared party-wall line, and whether we need to run a new electrical circuit. You’ll get the full written price before any work begins. Estimates are free. Call (940) 412-7340 to set one up.
We Also Serve Cities Near Mount Vernon
Our Gate Installation crews cover all of Mount Vernon and the surrounding area, including New Rochelle, Yonkers, the north Bronx, and White Plains. If your gate sits on a shared line or a tight South Side lot, we’ll treat it like our own neighborhood.
Serving Mount Vernon, NY - Our Local Coverage Area
We’re based in the Mount Vernon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Mount Vernon
Because on many Mount Vernon lots, especially South Side row-house properties near the Bronx border, there isn’t room for a swing gate’s arc. A slide gate travels parallel to the fence line on a track, so it fits driveways where a swing gate would hit the neighbor’s stoop or a parked car. It’s not an upsell; it’s often the only workable option. Call (940) 412-7340 for a free measure and a straight answer.
Not necessarily. On Mount Vernon blocks where row houses share a continuous boundary fence, what looks like a freestanding gate post is often set into a concrete footing or party wall shared with the adjoining property. Before we dig, we check the lot line and the footing condition so the new install doesn’t crack a neighbor’s wall or trigger a dispute. If the footing is shared, there’s a conversation to have first. We’ll walk you through it.
Because the old post footing was never fixed. If a new gate is bolted onto posts set in heaved, salt-eaten concrete, it will sag exactly like the old one. On Mount Vernon stoops and sidewalks, that heaved concrete is the rule, not the exception. We replace the footing rather than hiding the problem with shims. Call (940) 412-7340 and we’ll inspect the footing and quote the real fix.
Yes. UL 325 requires entrapment protection on any automatic gate operator. There are no Mount Vernon exceptions for tight driveways or old houses. Photo-eyes or edge sensors must stop and reverse the gate if anything blocks its path. If a contractor quotes an automatic gate without them, the gate won’t pass inspection and shouldn’t be used. Every operator we install includes them, tested before we leave.
Usually. We stage materials so vehicle and pedestrian access stay open for as much of the day as possible. On shared driveways, we coordinate with you and the neighbor so the right of way isn’t shut down longer than necessary. We’ll tell you in the written estimate what the access plan looks like before the work starts. Call (940) 412-7340 for that estimate, free.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Mount Vernon since 2008.