Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Spring, TX
Gate repair in Spring, TX usually costs between $185 and $540 for most household jobs, with motor replacements and post resets running higher. We’re Portcullis Gate Repair, a Kingswell company serving Spring with written pricing, a real arrival window, and a 365-Day Done Right Promise on every repair. If your gate is dragging, binding, or refusing to open, call (940) 412-7340 and you’ll reach a live person, not a voicemail tree.
Why Spring Homes Are Different
Spring’s housing stock is mostly brick-veneer tract homes built between the late 1980s and 2010s, and nearly all of them sit inside HOA-governed subdivisions that mandate ornamental wrought iron or steel driveway gates. Those gates are now 15 to 35 years old, which means the original swing-gate operators, hinges, and underground wiring runs are wearing out at the same time across entire neighborhoods like Gleannloch Farms, Benders Landing, and Harmony.
The bigger issue is the soil. Harris County’s expansive Houston Black Clay heaves and shifts with every wet-dry cycle, and in Spring we see gate posts that have tilted 2 to 4 inches out of plumb because of it. A gate that drags or binds is often not a motor problem at all; it’s a post that moved. We also deal with the aftermath of Harvey’s 2017 flooding, which filled underground operator vaults and conduit with water across large parts of Spring. Add near-daily summer heat and extreme humidity, and you get rust on wrought iron frames and corroded low-voltage connections faster than in drier Texas metros. That combination – clay soil, aging gates, and moisture – shapes most of what we do here.
Our Main Spring Services
Most Spring homeowners call us for two things: a gate that has stopped working and an old operator that needs replacing. Here is what each involves locally.
Gate Repair in Spring
Spring gate repair calls are dominated by structural issues rather than simple motor failures. The clay soil moves posts, and a shifted post puts stress on hinges, actuators, and the gate frame itself. Our technicians start by checking plumb and alignment before diagnosing the operator, because fixing a motor on a misaligned gate just burns out the new motor too. Homeowners along Kuykendahl and Spring-Cypress corridors, where homes were platted in the early 1990s, see this pattern constantly. Every Gate Repair in Spring job includes a written price before we touch a bolt.

Gate Installation in Spring
A new gate in Spring has to survive clay-soil movement, HOA design rules, and humidity that eats cheap steel. Most subdivisions here require ornamental wrought iron or steel, and many HOAs want design approval before installation. We handle the gate itself, the hinges, and the post setting, using concrete depths that resist the seasonal heave better than the original 1990s pours. If you’re replacing a 20-year-old gate that’s rusted through, see Gate Installation in Spring for what’s involved and what it costs.

Electric Gate Repair in Spring
Electric gate repair in Spring is often about what Harvey left behind. Water in underground conduit corrodes low-voltage wiring; corroded connections cause intermittent faults that owners misread as a dead motor. We also see heat-related capacitor failures on older operators during July and August. Our techs arrive trained on the specific brand on your property, whether it’s a LiftMaster, Viking, FAAC, or DoorKing. See Electric Gate Repair in Spring for the full breakdown of repairs and pricing.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Spring
Our Spring trucks carry parts for Linear, Viking, Ghost Controls, and DoorKing operators, among others. That means many common repairs – a failed control board, a stripped gear, a dead capacitor – happen in one visit. See our brands for the full list of nine operator brands we service.
Pricing for Gate Company in Spring, TX
These are the ranges we quote most often for residential gate work in Spring. Every price is given in writing before work starts, so there is no surprise at the end.
| Service | Typical range in Spring |
|---|---|
| Gate repair service call (diagnostic) | $95-$185 |
| Hinge replacement (pair, standard) | $185-$340 |
| Post reset / realignment (single post) | $240-$480 |
| Swing-gate actuator swap | $380-$640 |
| Control board replacement | $210-$420 |
| Chain-belt replacement | $175-$310 |
| Safety sensor replacement | $145-$275 |
| Gate wheel replacement (sliding gate) | $160-$300 |
| Low-voltage wiring repair (per segment) | $120-$260 |
| Full operator replacement (parts and labor) | $520-$1,150 |
What pushes a Spring quote higher is usually post movement. If the gate is out of plumb because the clay soil shifted, the repair includes realignment work that a simple motor swap would not need. We tell you the full price up front, in writing, and that price is the one you pay.
Neighborhoods We Serve in Spring
We cover all of Spring, from the older master-planned communities along Spring-Cypress to newer sections off the Grand Parkway. Most calls inside Spring get a same-day or next-day arrival window, depending on the repair.
- Gleannloch Farms
- Benders Landing
- Harmony
- Spring Trails
- Northampton
Service Area – Cities Near Spring
If you live just outside Spring, we also serve the surrounding communities. Our technicians cover Humble, TX, Tomball, TX, Houston, TX, and Conroe, TX with the same written pricing and 365-Day Done Right Promise. Scheduling is coordinated from our Houston office, with crews dispatched locally to Spring and its neighbors.
Serving Spring, TX - Our Local Coverage Area
We’re based in the Spring area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Spring
Most Spring calls are scheduled same-day or next-day, depending on the repair and where you are in the area. We give you a real arrival window, not a four-hour guess, and we honor it. Call (940) 412-7340 and a live person will give you a time before you hang up.
For repairs, almost never. For a full replacement, many Spring HOAs require design approval first, and we can tell you what your community typically asks for. We will not start an installation until you confirm the HOA is satisfied.
Yes. Every job in Spring gets a written quote before any work begins, and it includes the 365-Day Done Right Promise. If a repair fails inside that year, we come back at no charge. That is the Kingswell Guarantee, in writing, on every invoice.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Spring Customers Say
"Electric gate kept doing its own thing, opening at random. The tech found a shorted sensor and a worn board, fixed both, and showed me the old parts. Price was what he quoted on the phone."
- Cassandra Pike"Installed a new gate for us after the old wooden one rotted out. Clean work, showed up on time both days, and the written price didn't change. It swings perfectly."
- Donna Kirkpatrick"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad





Before
After
Before
After
Before
After