Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Palm Beach
Gate installation in Palm Beach runs $2,800 to $14,000 for most residential jobs, with custom ornamental work on historic estates reaching $30,000 or more. That range covers everything from a simple driveway swing gate with a Viking operator to a one-of-a-kind forged-iron gate rebuilt around a FAAC underground motor. We know the island’s housing stock, its Architectural Commission, and its salt air better than most companies that merely list Palm Beach on a service map.
Portcullis Gate Repair has been a Kingswell company since 2008. Every job starts with a written price before a single bolt comes off the truck. Call (940) 412-7340 and a live person answers, any hour, any day.
Key takeaways:
- Palm Beach gate installations start around $2,800 for a basic driveway swing gate and operator.
- Historic and custom ornamental work on ARCOM-reviewed properties typically runs $8,000 to $30,000+.
- Salt air from the Atlantic and the Intracoastal corrodes hardware roughly twice as fast as in West Palm Beach.
- Every installation includes a written Kingswell Guarantee and a written price before work starts.
Why Portcullis Gate Repair Is Palm Beach’s Preferred Gate Installation Company
Homeowners around the Estate Section, along South Ocean Boulevard, and up near the Palm Beach Country Club call us because we answer the phone. That sounds small, but on this island, a gate that will not open needs Gate Repair - Palm Beach, not a minor annoyance. It blocks the driveway, the service entrance, or the only pedestrian access to a property. We schedule a real arrival window and our technicians arrive in uniform, background-checked, and familiar with the specific operator on the property before they pull up.
Our crews work regularly in Palm Beach, so we know what ARCOM expects and what the salt does to a motor housing in eighteen months. That local knowledge changes how we spec an installation. We do not sell a homeowner a powder-coated steel panel that will start rusting at the hinges by the second hurricane season. We recommend what actually holds up here, and we put it in writing.
Dean Prescott, who leads Portcullis, insists on the same Kingswell standard for every job: the price is written before work begins, the arrival window is real, the job site is left clean, and the guarantee is stamped on the invoice. That is the Kingswell Way, and every independently owned Kingswell location is bound to it. We do not ask you to trust us on faith. We hand you the paper first.
Sliding Gate Installation in Palm Beach
Sliding Gate Installation in Palm Beach is the right choice for long driveways and properties where a swing gate would arc out over landscaping, a sidewalk, or a street. A sliding gate runs on a ground track and cantilever roller system, and on a barrier island where every square foot of lot is expensive, it preserves usable driveway space. Most residential sliding gate installations in Palm Beach run $3,200 to $9,500, depending on gate length, operator choice, and whether the concrete pad needs to be cut and repoured.
The salt factor matters here more than inland. We use sealed bearing assemblies and marine-grade hardware on sliding gate tracks within a few hundred yards of either shoreline. The Intracoastal side is not gentler than the ocean side. It just corrodes differently. A track system that would last a decade in West Palm Beach may need bearing service in five years on South Ocean Boulevard.
Concrete and Track Work
A sliding gate is only as smooth as the concrete under it. On Palm Beach estates where the original driveway apron was poured decades ago, we often find the track bed has settled or spalled at the edges. We cut out the affected section, pour a new reinforced pad with proper slope for drainage, and set the track to the exact height the gate leaf requires. Rushing this step is why some sliding gates bind and groan after two years.
Operator Selection for Salt Air
We prefer sealed operator housings for coastal work. A Viking or Elite sliding gate operator with a properly gasketed control box holds up far better than an open-chassis unit bolted to a post facing the Atlantic. We also wire in a battery backup so the gate still opens when the power drops, which happens more often on the island during summer thunderstorms than people expect.
Gate Opener Installation in Palm Beach
Gate Opener Installation in Palm Beach often means retrofitting a modern operator onto an existing gate, frequently an old ornamental iron leaf that predates automation by decades. Many of these gates were built by hand for the original estate owner, and no two swing exactly alike. A generic install will bind, chatter, or burn out a motor. We measure the gate’s actual travel arc, weigh the leaf, and select an operator rated for the load. Typical gate opener installation in Palm Beach runs $1,800 to $6,500, with underground operators on the higher end.
Underground Operators for Ornamental Gates
On historic properties, ARCOM will often reject a visible post-mounted operator arm. The solution is an underground operator, typically a FAAC or BFT unit, set in a waterproof vault beneath the hinge post. The motor rotates the gate from below and stays completely invisible. It is the cleanest look possible, but it demands precise installation: the vault must drain, the gearbox must be sealed against salt intrusion, and the limit switches need calibration to the gate’s exact arc. We do this work regularly on the island.
Control Electronics and Access
A new operator is not just a motor. On Palm Beach estates, we wire in keypads, telephone entry, intercom integration, and sometimes camera systems that tie into the house’s existing automation. We test every safety sensor, and we set the entrapment protection properly. A heavy gate moving under motor power is a legitimate safety concern, and we do not hand a property back until every photocell and edge sensor responds correctly.
Trusted Brands We Service in Palm Beach
Our technicians are trained on nine major gate-operator brands, and we keep common parts stocked for quick turnaround in Palm Beach. For this island’s mix of older estates and newer construction, we most often work with Viking, Ghost Controls, and DoorKing operators on residential properties, and FAAC or BFT underground units where ARCOM review is in play. When we install a gate, we are also the team that services it later, so we spec equipment we know we can support for years. That matters on an island where a failed control board in August is not a two-week wait for a part from another state.
Common Gate Installation Problems We See in Palm Beach Homes
- Salt corrosion at hinge posts and motor vaults. The Atlantic and the Intracoastal both push salt air across the island, and a hinge post that looks fine from the outside can be paper-thin at the base. We regularly replace the post footing and re-bed the gate leaf as part of a proper install.
- ARCOM review on historic properties. The Architectural Commission has final say over what a gate looks like on many Palm Beach estates. If the replacement does not match the original character, it does not get approved. We work with fabricators who can replicate Mizner-era ironwork, right down to the scroll detailing.
- Seasonal gate idling. A gate that sits unused from May to October develops its own problems: hydraulic seals dry, limit switches drift, and battery backups drain. November service calls spike on this island for exactly that reason, and an installation done right accounts for the idle months.
- Undersized operators on heavy bespoke gates. A custom forged-iron gate can weigh 800 pounds or more. Installers who bolt on an operator rated for a 300-pound gate get six months of service before the motor fails. We weigh the leaf and match the operator to the load, not the budget line.
Pricing for Gate Installation in Palm Beach, FL
Residential Gate Installation in Palm Beach ranges broadly because the island’s properties range from modest mid-century homes to 20,000-square-foot estates. Here is what we typically see:
- Gate opener only (retrofit): $1,800 to $6,500 installed.
- Sliding driveway gate with operator: $3,200 to $9,500.
- Swing gate, new steel or aluminum, with operator: $2,800 to $8,000.
- Custom ornamental iron gate, historic or ARCOM-reviewed: $8,000 to $30,000+.
- Underground operator installation (FAAC/BFT): $5,000 to $12,000 including vault, drainage, and electrical.
What moves the number: gate length and weight, operator type, whether we are cutting concrete, whether the property is under ARCOM review, and how far the electrical run is from the nearest power source. You get the exact price in writing before any work begins. Call (940) 412-7340 and we will come measure the opening, look at the existing gate or the new opening, and hand you a written estimate. No one starts turning bolts until you approve that number.
We Also Serve Cities Near Palm Beach
Our crews cover Gate Installation in Palm Beach and the surrounding communities, including West Palm Beach, North Palm Beach, Greenacres, and Palm Beach Gardens. Scheduling for Palm Beach is coordinated through our South Florida office, so a live person can book your visit any time of day. The same written Kingswell Guarantee applies on every job, in every one of these cities.
Serving Palm Beach, FL - Our Local Coverage Area
We’re based in the Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Palm Beach
Because the island’s salt air attacks from two directions at once. The Atlantic pushes salt spray from the east, the Intracoastal pushes it from the west, and the result is motor housing rust and circuit board oxidation roughly twice as fast as what inland West Palm Beach homes experience. A six-month service schedule, including cleaning and re-greasing hinges, checking limit switches, and inspecting electrical connections, is realistic on this island. Call (940) 412-7340 if your last service was more than six months ago.
Yes, and the usual answer is an underground operator. By mounting the motor in a vault below the hinge post, the original ornamental iron leaf stays completely intact and visible, which is what ARCOM cares about. On a 1920s Mediterranean Revival estate off Via Bellaria, we installed a FAAC underground operator under a restored one-of-a-kind forged-iron swing gate, then cut and poured a new concrete post footing because the original hinge post had corroded through at the base. We matched the existing ornamental leaf, set the rack and pinion clearances to the gate’s slightly out-of-round arc, and dialed the safety photocell and loop detector so the assembly opens silently and stops precisely at the estate’s stone jamb. The rebuild passed because we kept the original ironwork.
Expect a service call that involves re-seating limit switches, lubricating hinges that have stiffened, and possibly replacing a drained battery backup. Hydraulic seals dry out when a gate sits unused for six months, and the first movement in November is often rough. We see this every year as seasonal residents return to Palm Beach. We can inspect and correct it in a single visit, and if the gate was installed by us and it is within the 365-Day Done Right Promise, we do the return call at no charge.
Every automatic gate installation should include at least two types of entrapment protection: photocell sensors across the gate’s path and a reversing edge or pressure sensor on the gate leaf itself. On heavy bespoke gates, we often add a third layer with a loop detector in the driveway. These are not optional extras. A moving gate that weighs several hundred pounds can cause serious injury, and we install and test every safety device before we consider a job complete.
The fix starts at the hinge post, not the gate leaf. On Palm Beach properties, salt water wicks into the concrete or masonry at the post base and slowly corrodes the steel inside. The gate sags because the post has started to lean or the hinge bearings have worn. We remove the leaf, inspect the post, replace the footing if necessary, and re-hang the gate with new sealed bearings before adjusting the operator. That is the only way to fix the sag for good, rather than tightening a hinge and pretending the problem went away. Call (940) 412-7340 for an inspection and a written repair or replacement price.
Portcullis Gate Repair serves Palm Beach with Gate Installation, gate repair, and electric gate service for residential and commercial properties. Every job carries the Kingswell Guarantee: a written price before work starts, a real arrival window, a clean job site, and a written guarantee on the work. If a repair fails within 365 days, we return and fix it at no charge. Call (940) 412-7340 any time for a free estimate.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Palm Beach since 2008.