Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Cibolo
Most gate repair calls in Cibolo come down to two things: a hinge post that the Blackland clay has pushed out of plumb, or a builder-grade operator that gave up after a decade of Texas sun. We handle both, usually in a single visit. Portcullis Gate Repair has been a Kingswell company since 2008, and our technicians know Cibolo’s subdivisions street by street. When your swing gate starts dragging across the driveway or your HOA entrance gate stops halfway, call (940) 412-7340 and a live person answers, day or night.
Why Portcullis Gate Repair Is Cibolo’s Preferred Gate Repair Company
Cibolo grew fast, and the builders who put up those master-planned communities used the same subcontractors, the same gate models, and the same operator brands across entire subdivisions. That means we see the same failure patterns repeat themselves block after block. Our technicians have walked those streets enough to know what they’re walking into before the truck parks.
Dean Prescott leads our team, and he’s kept one rule in place since day one: the price goes in writing before any work starts. That’s not a pitch. It’s the Kingswell Guarantee, and it applies to every gate repair we do in Cibolo, from a sagging iron driveway gate in Town Creek to an automatic opener in Buffalo Crossing.
We answer the phone around the clock. No voicemail trees. No callback queues. When a gate sticks open at 11 p.m. and your dog is loose in the front yard, you reach a person who can dispatch a technician to Cibolo the same night.
Metal Gate Repair in Cibolo
Metal Gate Repair in Cibolo usually means ornamental wrought-iron driveway gates, and the failure we see most often isn’t the gate itself. The Blackland Prairie clay under Cibolo swells when it rains and shrinks when it dries, and over ten or fifteen years that cycle walks the hinge post out of plumb. The gate starts to sag, the latch stops lining up, and the whole frame racks out of square. We reset the post in a proper concrete footing, correct the sag, and re-hang the gate so it swings true again.
Hinge and Post Reset
A leaning post is the root cause behind most metal gate failures in Cibolo. We saw it plainly in Cibolo Valley Ranch, where a LiftMaster swing gate had begun dragging and tripping its safety photocell. The operator was fine. The hinge post had walked. We pulled the gate, reset and re-concreted the footing, squared the frame, and re-leveled the rack and pinion so the operator ran smooth again.
Weld and Rust Repair
Iron gates in Cibolo take two hits: the wet-dry clay cycle that flexes the joints, and the hard freezes that crack weld seams. The February 2021 storm split more than a few gates in this corridor. We grind out the cracked weld, weld it properly, and treat the rust before it spreads. A typical weld repair on an iron driveway gate in Cibolo runs $150 to $400 depending on how many seams need work.
Wood Gate Repair in Cibolo
Wood Gate Repair in Cibolo covers the cedar and pine driveway gates that came standard on some of the city’s older ranch-style lots and the newer privacy gates on side yards. Wood moves with moisture, and Cibolo’s wet-dry rainfall cycle means those boards swell, cup, and pull against the hinges. When a wood gate starts dragging on the latch side or pulling away from the post, fixing it early saves the frame.
Frame and Sag Correction
A sagging wood gate in Cibolo is usually two problems working together: the clay shifting the post, and the frame joints loosening from repeated moisture cycling. We square the frame, replace rotted sections where needed, add a diagonal brace if the builder skipped one, and re-hang the gate. Most wood gate sag corrections run $250 to $500 in this market.
Latch and Hardware Replacement
When a wood gate won’t latch, the fix is usually simpler than rebuilding the gate. We replace worn latch hardware, shim the hinges, and adjust the striker plate so the gate closes and stays closed. It’s a smaller job, typically $100 to $250, and the kind of thing we handle same-day in most Cibolo neighborhoods.
Trusted Brands We Service in Cibolo
Our technicians carry service experience on nine major gate-operator brands, and in Cibolo that matters because so many subdivisions share the same equipment. We regularly service LiftMaster swing operators, Linear actuators, Viking slide operators, and DoorKing systems, along with FAAC, BFT, Ghost Controls, Elite, and Mighty Mule. We stock common parts for the operators most common across Cibolo’s builder communities, so many repairs happen in one trip instead of two.
Common Gate Repair Problems We See in Cibolo Homes
- Builder-grade operator failure at the 10-15 year mark. Cibolo’s mid-2000s and 2010s subdivisions were built with mid-grade LiftMaster and similar swing operators, and entire streets are now hitting the same repair cycle. When one fails, half the block is likely close behind it.
- Post lean from Blackland clay. The same expansive soil that cracks local foundations also pushes gate posts out of plumb season after season. This is the dominant failure mode in Cibolo, not hardware wear. The fix is a post reset, not a new gate.
- Racked frames and misaligned safety sensors. When a post leans, the gate frame twists, which pushes photo-eyes out of alignment and makes loop detectors misfire. A gate that stops halfway and reverses is often racked, not broken.
- Missing power runs on retrofitted gates. Many Cibolo homes were built with manual gate posts and no buried conduit. Adding an operator later means trenching a new power line and pulling low-voltage loop detector wire, because the builder never ran it during construction.
Pricing for Gate Repair in Cibolo, TX
We give you the price in writing before any work starts, so let’s talk real numbers for Cibolo. A hinge post reset on an iron driveway gate typically runs $350 to $700 including concrete and labor. A swing-gate actuator swap, parts and labor, usually lands between $400 and $900 depending on the operator model. Weld repairs run $150 to $400. Adding automation to a manual gate, including trenching the new power run and installing the loop detector, generally starts around $1,500 and goes up from there. The clay soil in Cibolo sometimes adds cost, because a proper post reset needs a deeper footing than a quick shim job. Call (940) 412-7340 and we’ll send a technician to quote it properly.
We Also Serve Cities Near Cibolo
Our Gate Repair team serves the whole northeast San Antonio corridor. If you’re in Schertz, Universal City, Converse, or New Braunfels, the same Kingswell Guarantee applies: a written price before work starts, a real arrival window, a clean job site, and a written warranty on the repair. Gate Repair in Cibolo remains our focus, but those nearby cities get the same standard.
Serving Cibolo, TX - Our Local Coverage Area
We’re based in the Cibolo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Cibolo
In Cibolo, it’s usually the gate, not the operator. The Blackland clay moves the posts, the frame racks out of square, and the gate starts dragging or binding, which makes the operator’s safety sensors trip and reverse. We test the gate’s travel under load before we condemn the operator. Call (940) 412-7340 and we’ll diagnose it properly.
Yes. Many Cibolo homes were built with manual gate posts and no buried conduit, so the job involves trenching a new power line to the gate and pulling low-voltage loop detector wire. Then we mount the operator, install the entrapment protection, and program the remote. The written quote covers the full scope, including the trenching, before any work begins.
It comes down to soil. Cibolo sits on Blackland Prairie shrink-swell clay, and different parts of the city have different clay depths and drainage. If your lot holds water longer or sits on deeper clay, your posts heave more between wet and dry seasons. That’s why post lean and frame sag are the dominant gate failures across Cibolo, while a friend on shallower or sandier ground might not see it at all.
They can. The February 2021 freeze that hit this corridor hard cracked weld seams on iron gates and seized automatic opener gear assemblies that were never winterized. If your gate ran fine before a freeze and now struggles or groans, the gear assembly may have taken damage. We inspect the full operator and the gate frame, not just the symptom.
Very worried, honestly. Entrapment protection exists because a gate moving under power can injure or kill someone, especially a child or a pet. If the photo-eyes or the reversing mechanism isn’t functioning, the gate should be taken out of automatic mode until it’s fixed. This is a genuine safety issue, not a convenience repair. We treat entrapment-protection failures as priority calls. Call (940) 412-7340 and we’ll get a technician to your Cibolo home quickly.
When your gate needs work in Cibolo, you want a company that answers the phone, shows up in the window it gave you, and puts the guarantee in writing. That’s how we’ve operated since 2008. Call (940) 412-7340 for a free estimate, and you’ll get the price before we turn a single bolt.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Cibolo since 2008.