Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Granite Falls
Gate repair in Granite Falls usually means one of two things: a sagging farm-style swing gate dragging across gravel, or an electric operator that quit after a hard freeze. Most repairs we handle in Granite Falls run $220-$650 parts and labor, and we can typically be on-site within one business day, often same-day for a gate that won’t open at all. If your gate is stuck closed and it’s your only way out of the property, call us at (940) 412-7340 right away. We know the Mountain Loop Highway corridor and the gravel drives off it, and we treat every Granite Falls gate as the access point it actually is. For a full breakdown of what we fix, see our Gate Repair services.
Why Portcullis Gate Repair Is Granite Falls’s Preferred Gate Repair Company
Granite Falls homeowners call us because their gate has to work. Not mostly work. Not work until the next freeze. A gate on a rural acreage lot off the Mountain Loop Highway is often the only vehicle access, and when it fails, nothing else matters that day. Dean Prescott, who leads Portcullis, has built our reputation in the foothills on showing up when we say we will and putting the price in writing before a single bolt gets turned.
We’re an independently owned Kingswell company, which means we’re held to the Kingswell Guarantee on every job: a written price before any work starts, a real arrival window, a clean job site, and a written guarantee on the repair. If a repair fails within 365 days, we come back and fix it at no charge under the 365-Day Done Right Promise. That’s not a sales line. It’s stamped on the invoice.
Our technicians are background-checked and arrive in uniform, and when they pull up to your gate in Granite Falls, they already know the operator brand you have, because we carry parts and service experience for Viking, Ghost Controls, DoorKing, and Elite systems, among others. If you’re searching for Granite Falls gate service you can actually reach, we answer the phone 24 hours a day, every day, with a live person.
Metal Gate Repair in Granite Falls
Metal Gate Repair in Granite Falls starts with the post, not the panel. On the rural acreage lots that surround this town, most metal gates are tubular steel swing gates mounted on concrete footings that were poured decades ago, and the foothill freeze-thaw cycle has been working against them every winter since. When the ground heaves, the post tilts, the gate drops, and the latch stops lining up. A typical post reset and gate realignment in Granite Falls runs $280-$500, and it’s the most common metal gate job we do.
Hinge and Post Work
Steel hinges rusted solid from persistent foothill rain are the second most common failure we see. We cut out the old hinge, weld in a replacement rated for the gate weight, and make sure the post is still plumb before we call it done. If the hinge post moves when you push on the gate, there’s no point replacing a hinge, the footing has failed and that’s the repair.
Weld and Rust Repair
Deep rust at the hinge and latch areas is normal for a Granite Falls gate after a few wet seasons. We grind out the rust, weld patches where the steel has thinned, and treat the area so it doesn’t come back in a year. Repairs of this type in Granite Falls typically run $180-$380, depending on how much steel has to be replaced.
Wood Gate Repair in Granite Falls
Wood Gate Repair in Granite Falls is usually a footing and post job disguised as a sagging gate. Many of the older wooden-post farm gates in this area were set in the ground without proper concrete, or with footings too shallow for the freeze depth at this elevation. When the ground heaves, the post tilts back or to the side, the gate pulls away from the latch, and the whole thing drags. Straightening a wooden gate without resetting the post means you’ll be straightening it again next spring. A full post reset with new concrete in Granite Falls runs $320-$550.
Rail and Brace Repair
Wooden gates that have been dragging pick up split rails and broken diagonal braces. Once the gate is plumb again, we replace split rails with pressure-treated lumber and re-brace the corners so the gate holds its shape instead of sagging into a parallelogram. This work usually adds $120-$240 to the post reset cost.
Latch and Hardware Replacement
Wood gates flex, and that flex works the latch hardware loose over time. We install new latch posts, striker plates, and adjustable hinges so the gate closes and stays closed without having to lift it. Basic wood gate hardware replacement in Granite Falls typically runs $140-$280.
Trusted Brands We Service in Granite Falls
We work on Viking, Ghost Controls, DoorKing, and Elite operators regularly in Granite Falls, and we carry the replacement parts that fail most often: circuit boards, limit switches, photocells, and remote transmitters. Because we service all nine major gate-operator brands and stock parts for the ones Granite Falls properties actually run, we’re usually able to repair an operator in one visit instead of diagnosing it and coming back a week later. That matters when your gate is your only way in and out.
Common Gate Repair Problems We See in Granite Falls Homes
- Heaved hinge posts from winter freeze-thaw. The ground at this elevation freezes and thaws repeatedly through winter, pushing gate posts out of plumb until the gate sags and drags. A sag correction that skips the footing fails again by next spring.
- Rusted steel hinges and latch mechanisms. Granite Falls receives significantly more annual precipitation than Marysville or Everett, and steel hardware left in that moisture rusts solid within a few seasons. The gate either won’t latch or won’t swing freely.
- Undersized operators on wide farm gates. A long, heavy tubular steel gate needs a properly rated operator. When an operator is undersized, the motor strains, the limit settings drift, and the safety photocell trips constantly. On wide acreage entrances, we usually recommend a heavy-duty operator sized for the actual gate weight and length.
- Solar gate openers losing charge in short winter days. Granite Falls’s short, wet winter days mean solar panels produce far less power, and undersized battery banks can’t carry the gate through the night. We size solar systems for the worst month, not the best one.
Pricing for Gate Repair in Granite Falls, WA
Here are the numbers we quote most often in Granite Falls, before any work begins:
- Standard service call and diagnosis: $75-$120, waived if we do the repair
- Post reset and gate realignment: $280-$550, depending on footing condition and gate weight
- Hinge or latch replacement (steel gate): $140-$320
- Weld and rust repair: $180-$380
- Operator circuit board or limit switch replacement: $220-$480, brand-dependent
- Solar gate opener installation or upgrade: $650-$1,400, sized to the gate and winter sun
These are real ranges for Granite Falls’s rural and semi-rural market, where long driveways and heavy gates put more load on operators than a tight suburban lot would. Every estimate is free, and the price is written down before we start. You’ll know exactly what the repair costs, and it will not change after we’ve taken the gate apart.
We Also Serve Cities Near Granite Falls
Granite Falls sits at the Cascade foothills gateway to the Mountain Loop Highway, and our technicians work the surrounding foothill and lowland communities regularly. If you’re in Lake Stevens, Marysville, Arlington, or Everett and need gate work on an acreage property, we serve those areas with the same written price and 365-Day Done Right Promise. Call (940) 412-7340 and we’ll get you on the schedule.
Serving Granite Falls, WA - Our Local Coverage Area
We’re based in the Granite Falls area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Granite Falls
Because in Granite Falls, a sagging gate is almost always a footing problem, not a hinge problem. The freeze-thaw cycle at this elevation heaves posts out of plumb, which drops the gate and makes it look like it’s sagging in the middle. We check the post first because straightening the gate without fixing the post means it fails again by spring. Call (940) 412-7340 for a free assessment.
No, most of the rural and semi-rural properties we service in Granite Falls run their gates on solar gate openers because running mains power down a long gravel drive isn’t practical. We size solar systems for Granite Falls’s short, wet winter days, with battery banks that can carry the gate through a week of cloud. We also install solar systems on gates that currently run on mains power as a backup for outages.
Yes. An automatic gate without working safety sensors will close on a vehicle, a child, or a pet. We see a lot of Granite Falls gates with sensors that have been disconnected because the beam keeps tripping, usually because the gate or post has moved and the beam no longer aligns. We realign or replace the sensors so the gate closes safely without faulting. Call (940) 412-7340 if your sensors keep tripping.
Usually yes. If the steel is sound and the gate hasn’t rusted through, we can weld, reset the posts, realign the gate, and give it years more life. Replacement only makes sense when the steel has rusted thin or the gate was never built to carry the operator mounted on it. We’ll tell you honestly which one you’re looking at, with the numbers written down either way.
Yes, especially in Granite Falls. Many Mountain Loop Highway properties have a single gate as their only vehicle exit, and wildfire evacuation is a documented risk in this foothill zone. If the operator fails and the manual release doesn’t work, the gate won’t open by hand and you’re stuck. We test the manual release on every electric gate repair we do in Granite Falls, before we test any automation feature. You should be able to open your gate by hand in under ten seconds without tools.
Granite Falls gate repair is what we do every day. If your gate sags, drags, won’t open, or won’t stay closed, call (940) 412-7340 for a free estimate. We answer with a live person, we arrive in the window we give you, and the price is in writing before any work starts.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Granite Falls since 2008.





Before
After
Before
After
Before
After