Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Humble
Gate repair in Humble, TX usually costs between $210 and $680 for most common fixes, and a full automatic operator replacement after flood damage typically runs $850 to $1,800. Those are real numbers from jobs we’ve done on driveways from Fall Creek to Kingwood. If your gate won’t open, sags on its hinges, or quit working after a hard rain, call us at (940) 412-7340 and we’ll give you a written price before we turn a single bolt.
We’re Portcullis Gate Repair, and we’ve been fixing gates since 2008. Humble isn’t a side stop for us. Our crews run dispatch daily through this part of Harris County, and we know the specific way water, clay soil, and humidity punish gate hardware here. The work isn’t the same as it is in Atascocita or out toward The Woodlands. You need someone who already knows that.
Why Portcullis Gate Repair Is Humble’s Preferred Gate Repair Company
Humble homeowners call us because we answer the phone at midnight the same way we answer at noon. A live person. No voicemail tree. When your driveway gate dies after a storm and your cars are trapped inside, that matters. When a hinge post shears on a Sunday afternoon and the gate is hanging into the street, it matters more.
Every technician who rolls into a Humble neighborhood arrives in uniform, background-checked, and carrying the Kingswell Guarantee in writing. That means four things, every job: a written price before work starts, a real arrival window we actually keep, a clean job site when we leave, and a written guarantee on the repair. If the repair fails within 365 days, we come back and correct it at no charge under the 365-Day Done Right Promise. Dean Prescott, who runs our team on the ground here, made that the standard. It’s not a franchise promise. It’s printed on every invoice.
Crews are dispatched from our Houston area office and serve Humble directly, so we’re not a two-hour drive away when your gate post starts leaning after a week of rain. We know the subdivisions, the driveways, and the failure patterns. That local knowledge is why we can quote faster and fix smarter than an out-of-town outfit guessing from a map.
Iron Gate Repair in Humble
Iron gate repair in Humble means fighting two enemies at once: clay soil movement below and rust above. The ornamental wrought-iron and tubular-steel gates common in Kingwood and the older 1970s and 1980s subdivisions along FM 1960 were built to look good, not to shrug off fifty-plus inches of annual rainfall and near-constant humidity. Once a coating is breached, hinges seize and latch bolts corrode within a single season. And in Humble’s expansive clay, the posts holding those iron gates heave and settle through wet-dry cycles until the gate is out of plumb and binding against the frame.
What a repair actually involves depends on what failed first. We start by identifying whether the panel distorted, the post moved, or the hardware gave out, because replacing a hinge on a gate whose post has sunk three inches is wasted work. A typical hinge rebuild runs $180 to $320. Straightening a bent top rail and re-welding cracked joints runs $250 to $450. If the post itself has moved, expect $380 to $700 for digging, re-setting in new concrete, and re-hanging the gate square. The price is written down before we start, not discovered after the gate is disassembled in the driveway.
Rust Repair and Re-Coating
Surface rust won’t kill a gate, but pitting rust through the bottom rail will. We cut out the thin section, weld in a new piece, and re-coat so the patch doesn’t fail in twelve months. Repairs of that kind in Humble run $220 to $400 per section, depending on how far the corrosion has traveled along the rail.
Hinge Replacement on Shed and Driveway Gates
Driveway gates eat hinges faster than people realize, and not all hinges are created equal. We replace failed hinges with heavier-gauge versions and inspect the jamb or post for rot or rust before we hang the panel back on. If we find movement in the post, that gets corrected too, because a new hinge on a moving post is a repair that won’t last the year.
Sliding Gate Repair in Humble
Sliding gate repair in Humble is as much about the track and footing as it is about the operator. Sliding gates, the kind you see on ranch-style lots off Will Clayton Parkway and on commercial driveways along the Eastex corridor, depend on a straight, stable track and a support post that hasn’t shifted. When clay soil heaves after a long wet spell, the post nearest the opening moves, the track goes slightly out of line, and the gate starts grinding, binding, or throwing the chain. In Humble’s flood-prone ground, this is the pattern on maybe half of every sliding gate repair call we run.
Costs typically break down like this: a track realignment runs $150 to $280. Replacing worn rollers, guides, or the chain sprocket runs $200 to $380. If the post has moved and needs to be dug out and re-set in concrete, you’re looking at $420 to $750. If the operator itself failed because water got into the control box, that’s an operator replacement, which starts around $850 for a mid-range residential model installed, and goes up from there depending on duty cycle and brand.
Track and Roller Replacement
Flat-spotted rollers and bent track sections make a sliding gate sound like a freight train and strain the motor. We measure the gate, match the roller type, and replace the worn section rather than telling you the whole gate needs to go. Most roller and guide replacement jobs land between $200 and $380.
Cantilever Gate Systems
Some Humble properties use cantilever sliding gates, especially where driveways cross drainage swales or where a bottom track would clog with debris. The principle is similar, but the failure point shifts to the carriage rollers and the stiffness of the frame itself. We service those and correct alignment issues the same way, with the same written price before we start.
Trusted Brands We Service in Humble
We carry parts for and repair Viking, Ghost Controls, DoorKing, and Elite operators, among nine major brands our technicians are certified to service. Because we stock common boards, remotes, and optical sensors for these systems, turnaround for Humble customers is usually a matter of days, not weeks. If your Gate Repair call involves a DoorKing slide operator that has stopped responding or a Ghost Controls swing opener throwing error codes, the tech who arrives already knows that system. That’s the Kingswell Way: trained on the specific brand before we ever pull into your driveway.
Common Gate Repair Problems We See in Humble Homes
- Ground-level operator boxes flooded after routine rain. In Humble’s low-lying bayou corridors, a three-inch overnight rain is enough to submerge a control box mounted at the base of a column. The board corrodes, the motor shorts, and a repair call becomes a full operator replacement. We recommend and install elevated enclosures that sit above the historical flood line.
- Leaning posts from expansive clay soil. Humble’s clay shrinks when it’s dry and swells when it’s wet. Over a few seasons, that repeated cycle works a post with a minimal concrete footing loose enough to throw the gate out of plumb. We dig down, re-set the post with a proper footing, and realign the gate rather than just bending the panel back into place.
- Rust and seized hardware from constant humidity. Gates are steel, and steel in Humble’s climate rusts fast once the coating is compromised. Hinges freeze, latch bolts won’t throw, and weld joints crack along the bottom rail. A single-season failure is common here if the bare metal isn’t treated promptly.
- Solid infill gates pushed over by storm wind loads. Solid metal gates catch a lot of wind, and during a straight-line storm the panel itself usually holds while the post or hinge fails first. Undersized or rotted hinge posts shear, leaving the gate hanging. Correcting that means post replacement and re-hanging, not just bolting on a bigger hinge.
Pricing for Gate Repair in Humble, TX
Here is the honest range for Humble, based on jobs we have actually run in this market. Minor fixes like tightening a chain, adjusting a limit switch, or replacing a remote receiver run $120 to $200. Hinge rebuilds and rust section repairs run $180 to $400. Post reset and realignment runs $380 to $700. A full automatic operator replacement after flood damage runs $850 to $1,800 depending on the brand and type. The price is written down and agreed upon before any work starts, every single time. Call (940) 412-7340 for a free estimate with no obligation and no after-the-fact surprises.
We Also Serve Cities Near Humble
Our Gate Repair team responds to homes throughout the northeast Houston metro. In addition to Gate Repair in Humble, we serve Spring, Houston, Channelview, and Galena Park. If your driveway is outside those areas, call anyway. We’ll tell you honestly whether we can get a crew to you.
Serving Humble, TX - Our Local Coverage Area
We’re based in the Humble area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Humble
Because your operator control box is mounted at ground level and Humble sits in one of the most flood-prone corridors in Harris County. Water gets in, fries the board or the motor, and the repair call becomes a replacement. We install elevated or flood-rated enclosures that sit above the historical high-water mark, which usually ends the cycle for good. Call (940) 412-7340 for an exact quote on a flood-rated enclosure install.
Usually the post. Panel distortion happens, but in Humble’s expansive clay soil the post was likely set with a minimal footing and has heaved or settled out of plumb, which makes the whole gate sag and bind. We measure the post for movement before we touch anything else. If it’s the post, expect a reset and realignment; if it’s only a worn hinge, the fix is simpler and cheaper.
Most automatic gate operators have a manual release, typically a keyed handle or a pull chain on the motor housing that disengages the drive and lets you push the gate by hand. You should know where it is before the next storm hits, not during it. Every install we do includes a demonstration of that release procedure before we leave. If you’re not sure how yours works, call and we’ll walk you through it.
If your gate is automatic, yes. Photo-eyes, the safety sensors mounted on either side of the gate opening that reverse the gate if something breaks the beam, are required for safe operation and protect children, pets, and vehicles. We test, align, and replace photo-eyes on every automatic gate service call. Your gate operator should refuse to close without a clear signal; if it does not, that’s a safety problem requiring a service call.
We repair nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our technicians are certified across those systems and we keep common parts for them in stock, so a Humble repair call typically gets diagnosed and resolved without waiting on a long lead-time part order.
If your gate is down, sagging, or acting up after the last big storm, call Portcullis Gate Repair at (940) 412-7340. We’ll give you a real arrival window and a written price before any work starts. That’s the Kingswell Guarantee, and it applies to every single job we do in Humble.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Humble and the northeast Houston metro since 2008.





Before
After
Before
After
Before
After