Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Savannah
Gate repair in Savannah means dealing with two realities most gate companies never mention: the Architectural Review Committee that must approve your hardware, finish, and gate profile before work begins, and the Denton County black clay that slowly shoves post footings out of square. We know both. If your swing gate drags against the latch or your automatic opener sounds like it’s grinding itself apart, call Portcullis Gate Repair at (940) 412-7340. We’ll give you a written price before a single bolt gets turned, and every repair carries our 365-Day Done Right Promise in writing.
Why Portcullis Gate Repair Is Savannah’s Preferred Gate Repair Company
Homeowners in Savannah call us because we’ve already done the homework on their street. We know which sections of the community were built in which phase and which gate profiles the ARC approved for each. That matters when your iron driveway gate has sagged at the latch and the fix isn’t just a hinge adjustment. It’s straightening or re-setting a post footing in expansive clay, then sourcing a replacement panel or finish that won’t get you a compliance letter in the mail.
Our technicians arrive in uniform, background-checked, and briefed on your specific operator before the truck leaves the shop. We service Viking, Ghost Controls, DoorKing, and Elite systems, along with five other major brands. And when a Savannah customer calls with an emergency, like a gate that won’t close and a dog that’s already spotted the opening, a live person answers. Not a voicemail tree. Not a callback tomorrow. A person, 24 hours a day, seven days a week.
Every job is run the Kingswell Way. Say the price before the work. Show up in the window we gave. Leave the place cleaner than we found it. Put the guarantee in writing. Come back if it fails. Portcullis is an independently owned Kingswell company, and that guarantee is why Savannah homeowners who’ve been burned by no-show gate companies tend to stay with us.
Metal Gate Repair in Savannah
Metal Gate Repair in Savannah is usually about the post and the bottom rail, not the panel you see from the street. The expansive clay under Denton County swells with spring rain and contracts through hundred-degree summers, and over a few years that cycle pushes your hinge post enough to rack an iron gate out of square. The panel is straight; the post isn’t. We fix the post first, then reset the hinges so the gate swings true. Most metal gate repairs in Savannah run $225 to $650, depending on whether we’re realigning an existing post or digging and re-setting a footing. A full bottom-rail replacement on a founding-phase iron driveway gate typically runs $500 to $1,100 parts and labor, including an ARC-compliant powder-coat match.
Post Footing and Realignment
When a post leans even half an inch in Savannah clay, the latch stops lining up. We dig down to the footing, assess whether it’s cracked or just drifted, and re-set it with proper drainage so water doesn’t pool at the base again. This is the fix that actually lasts.
Rust and Weld Repair
Savannah’s flat lots and marginal drainage mean water sits against the lowest horizontal rail after every storm. We cut out the rotted section, weld in a replacement, and match the finish to your community’s approved color. If the rust has crept into the hinge mounts, we address that too, because a gate that looks fine up top is often failing where you can’t see it.
Wood Gate Repair in Savannah
Wood Gate Repair in Savannah has one thing in common with iron work here: the clay is still the culprit. But wood fails differently. The boards swell in spring, shrink in August, and pull screws out of the post. Hinges bend. The gate drags a crescent into the driveway. We rebuild the frame where it’s rotted, replace the pickets that match your community’s approved profile, and re-hang the gate so it clears the ground without scraping. Expect to pay $275 to $700 for a typical wood driveway gate repair in Savannah, depending on how much of the frame and hardware needs replacing. Full wood gate rebuilds, where the post is sound but the gate itself is beyond patching, usually run $900 to $1,800 built to ARC specs.
Frame and Hardware Replacement
The frame is the skeleton. When it’s soft, new hinges won’t hold. We rebuild the stiles and rails with pressure-treated stock or cedar, then install heavy-duty hinges and a drop rod that won’t wander out of its strike.
Sag and Alignment Correction
Wood gates sag, but in Savannah it’s often the post, not the gate. If the post is still sound, we add an anti-sag kit and a diagonal brace so the gate stays square. If the post moved, we address that before we hang anything back on it.
Trusted Brands We Service in Savannah
Our technicians carry service experience across nine gate-operator brands, and in Savannah we see a lot of Viking and Ghost Controls on the newer sections, DoorKing on the earlier commercial-style entry systems, and Elite on mid-phase builds. We stock common boards, remotes, and safety components for these systems locally, so a diagnostic and fix often happens the same day without waiting on a parts shipment. If your operator is clicking but the gate isn’t moving, we’ll tell you whether it’s the board, the battery, the capacitor, or the actuator, the motorized arm that physically pushes the gate open, before you spend a dime.
Common Gate Repair Problems We See in Savannah Homes
- Clay-heaved hinge posts: Spring rains swell the soil, summer drought shrinks it, and your post drifts year by year until the latch misses by half an inch. We straighten the post and re-set the footing, not just the hinges.
- Bottom-rail rust on founding-phase gates: The earliest Savannah sections are hitting 15 to 20 years old, and flat lots with slow drainage keep water at the base of the gate. The rest of the gate looks fine; the bottom rail is quietly failing.
- ARC compliance gaps: Builders in successive phases used slightly different gate profiles and finishes. A repair that works mechanically but doesn’t match the community’s approved look can trigger a fine or removal order.
- Operator safety sensor faults: Savannah’s extreme heat and UV degrade photocell housings and wiring jackets faster than in shaded climates. A gate that reverses for no reason is often a sensor that’s cooked, not a motor that’s dead.
Pricing for Gate Repair in Savannah, TX
Here’s what you can expect in Savannah. A service call and diagnostic runs $85 to $135, which we credit toward the repair if you approve it. Minor latch and hinge adjustments run $150 to $300. Post realignment with footing re-set runs $400 to $900. Operator repairs, like a new control board or capacitor, run $250 to $750 parts and labor. Full actuator replacement on an automatic swing gate runs $800 to $1,500. You get the price in writing before we touch anything. No after-the-fact surcharges, no inflated invoice at the door, and every repair is guaranteed for 365 days. Call (940) 412-7340 for a free estimate, and we’ll quote you over the phone whenever possible.
We Also Serve Cities Near Savannah
Our Savannah team also handles gate work across the wider metro, including Gate Repair in Savannah neighbors like Houston, San Antonio, Dallas, and Fort Worth. If you’re in one of those cities and need the same written-price, written-guarantee service, call the same number: (940) 412-7340.
Serving Savannah, TX - Our Local Coverage Area
We’re based in the Savannah area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Savannah
If you’re repairing the existing gate with the same materials, profile, and finish, most ARC guidelines don’t require a new application. But if you’re replacing the gate, changing the finish, or swapping hardware that changes the look, you’ll need pre-approval before work starts. We help Savannah homeowners prepare the submission, including photos, dimensions, material specs, and color matches. Call (940) 412-7340 and we’ll walk through what your specific section requires.
The gate panel is straight; the post isn’t. Denton County’s expansive clay heaves in spring and contracts in summer, pushing your hinge post out of square over a few years. We fix the post footing, not just the latch, because adjusting the hinges without fixing the post means you’ll call us again in six months. Call (940) 412-7340 for a footing assessment.
Founding-phase Savannah homes sit on flat lots with marginal drainage, so rainwater pools against the lowest horizontal member after every storm. Combined with clay-driven post lean, the base stays damp and rusts through while the rest of the gate looks fine. We cut out the corroded section, weld in a replacement, and match the powder-coat to your community’s approved finish. Call (940) 412-7340 for a bottom-rail inspection.
Yes. We work directly with management companies and Architectural Review Committees in Savannah, handling the paperwork, the specs, and the finish matching so you don’t have to translate gate terminology for your HOA. We’ll submit the documentation, schedule around any committee review windows, and confirm approval before the crew arrives. Call (940) 412-7340 and we’ll start the conversation with your management company.
Yes, all automatic gate operators in Savannah must comply with UL 325 safety standards, which means working photocells, edge sensors, and proper force settings. If your gate reverses when a kid or pet is nearby, the sensors are doing their job. If they’re not, we replace or recalibrate them. Every repair we do includes verification that your entrapment protection meets current code. Call (940) 412-7340 for a safety check.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Savannah and surrounding communities since 2008. Call (940) 412-7340 for a free estimate on any gate repair, and we’ll give you the price in writing before work begins.