Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Houston, TX
Gate repair in Houston is shaped by two forces most Texas cities don’t deal with at once: expansive clay soil that shifts gate posts out of alignment year after year, and torrential rain that floods underground operator boxes and destroys control boards. Homeowners here call us about a gate that suddenly won’t latch, a motor that hums but won’t move, or a post that’s visibly leaning after a wet spring. You’ll get a written price before any work starts, and a real person answers our phone around the clock at (940) 412-7340.
Why Houston Homes Are Different
Houston’s gumbo clay swells when it’s wet and shrinks when it’s dry. A gate post set into that soil can move a half-inch in a single season, which is enough to throw a swing gate out of plumb so the latch no longer catches. This is the single most common repeat call we run in Houston, and it’s a problem you simply don’t see at the same frequency in cities with rockier ground.
The housing stock compounds it. Master-planned communities in Katy, Sugar Land, Pearland, and League City often put ornamental wrought iron driveway gates into brick columns, and those brick pillar footings catch every bit of soil movement. Inside the Loop, Meyerland, Garden Oaks, and Oak Forest were built in the 1950s through 1970s, and homeowners there frequently retrofit automated openers onto original fence lines, producing mismatched track heights, aging hinge posts, and operator mounts that were never meant to carry a motor. And Houston’s 50-plus inches of annual rain, with hurricane season on top, means any steel gate left unsealed will rust noticeably faster than the same gate in Dallas or Austin.
The post-storm pattern is predictable to anyone who’s worked the Brays Bayou corridor. An operator that sat underwater during a flood may run fine for a month, then fail as corrosion finishes eating through the control board. Experienced Houston gate technicians quote a post-flood inspection and preventive board swap rather than waiting for the callback.
Our Main Houston Services
Most Houston homeowners reach out to us for one of three reasons: a gate that won’t open or close properly, a full replacement or new installation, or an electric operator that has quit after weather or age. Each service has its own detailed Houston page below.
Gate Repair in Houston
Most swing-gate repair work in Houston comes down to three things: hinges worn oval from humidity, posts leaned by clay soil, and latch hardware that no longer lines up. We straighten or reset posts where the footing allows, replace hinge sets, and rebuild latch alignment so the gate closes like it should. On slide gates, the usual culprits are rusted track bolts and seized rollers, both of which we keep on the truck. Read the full breakdown on our Gate Repair in Houston page.
Gate Installation in Houston
A new gate in Houston needs a footing that can handle clay movement, which means digging below the active soil line and setting posts in concrete that won’t heave with the seasons. We handle HOA-facing installations in places like Cinco Ranch and Clear Lake, where the community often requires specific iron patterns or finish colors. Every installation starts with a free on-site measure and a written line-item price. Details are on our Gate Installation in Houston page.
Electric Gate Repair in Houston
Electric operators fail differently in Houston than anywhere else in the state because water intrusion is constant. Control boards corrode, capacitor banks short, and motors that sat through a street flood may run for three weeks before dying outright. We service nine major operator brands and replace control boards, loop detectors, photo eyes, and actuator arms. Our Electric Gate Repair in Houston page covers the whole service.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Houston
Our Houston trucks carry parts for Viking, Ghost Controls, and DoorKing operators, which covers most of what’s installed across the metro. Because our technicians train on these systems specifically, diagnosis is faster and the repair usually happens on the first visit. See our brands for the complete list of operators we service.
Pricing for Gate Company in Houston, TX
| Service | Typical range in Houston |
|---|---|
| Post realignment and re-set | $250-$500 |
| Hinge replacement (set of 2-4) | $180-$350 |
| Latch and strike repair | $120-$240 |
| Slide gate roller replacement | $200-$400 |
| Track cleaning and alignment | $150-$300 |
| Operator control board replacement | $350-$700 |
| Loop detector replacement | $250-$500 |
| Photo eye replacement (pair) | $150-$300 |
| Actuator arm swap (swing gates) | $500-$900 |
| Full operator replacement (parts and labor) | $800-$1,800 |
Houston prices push toward the top of these ranges when a post has heaved badly enough to need a new concrete footing, or when floodwater reached the operator and every electrical component needs replacing rather than just one. Whatever the total, you’ll see it in writing before we turn a bolt, and the price on that sheet is the price you pay.
Neighborhoods We Serve in Houston
Our Houston crews cover the full metro, from the inner-loop neighborhoods to the outer master-planned communities. Most areas see a technician within 24 to 48 hours, and storm-surge weeks are the one reliable exception.
- Meyerland
- Garden Oaks and Oak Forest
- Katy
- Sugar Land
- Clear Lake and League City
Service Area – Cities Near Houston
We also run calls in the smaller cities around Houston’s edges, where the same clay soil and humidity problems show up one driveway at a time. Our crews regularly cover Galena Park, TX, Channelview, TX, and South Houston, TX, along with Pasadena, CA for our West Coast customers.
Serving Houston, TX - Our Local Coverage Area
We’re based in the Houston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Houston
Most Houston calls get a technician within 24 to 48 hours. Flood events and the weeks right after a hurricane are the exception, when post-storm electrical failures spike across the whole metro. Call (940) 412-7340 and a live person will give you a real arrival window, not a callback promise.
Many Houston-area HOAs in places like Cinco Ranch, Pearland, and League City require approval before a gate’s style, finish, or height changes. Repairs that restore the existing gate usually don’t need anything. We’ll flag the requirement on your written quote if your community’s rules apply.
Every repair carries the Kingswell Guarantee: 365 days, in writing on the invoice, covering the parts and labor we performed. If the same repair fails inside that year, we return and correct it at no charge. That’s the 365-Day Done Right Promise, and it applies to every Houston job.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Houston Customers Say
"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti"Good repair on a sagging gate and a new hinge welded on. Took them a couple days to get the part in, but they told me that up front and it's been solid since."
- Hector Villanueva