Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Maywood, CA
Gate repair in Maywood comes down to one fact: this is one of the most densely populated cities in the United States, with roughly 24,000 residents packed into 1.18 square miles. Nearly every 1940s-1960s bungalow and two-to-four-unit rental sits behind a wrought-iron or chain-link security gate that cycles open and shut dozens of times a day. That heavy daily use means sagging hinges, dragging panels, stripped rollers, and post failures show up faster here than almost anywhere else in the county. If your gate is sticking, grinding, or refusing to close, call us at (940) 412-7340 and we’ll give you a written price before any work starts.
Why Maywood Homes Are Different
Maywood’s housing stock was almost entirely built between the 1940s and 1960s on narrow 25-to-40-foot-wide lots. Driveways are often only 10 to 12 feet across, so gates are compact, frequently used, and mounted to original masonry posts that have now seen six-plus decades of settling, cracking, and spalling. Hinge re-anchoring into aging concrete is nearly as common a service call as panel repair itself. A technician who knows Maywood checks the post before the panel, because in this city the post is usually the older, weaker component.
There’s another factor that makes Maywood different: geography. The city sits downwind of Vernon, one of California’s most industrially intensive areas. Airborne particulates, diesel exhaust, and periodic marine-layer humidity create a mildly corrosive microclimate that accelerates rust pitting on wrought-iron and oxidizes zinc-plated hardware noticeably faster than in cleaner inland communities. Streets bordering Vernon, particularly Slauson Ave and Atlantic Blvd, also carry some of the heaviest diesel truck traffic in the county. The chronic ground vibration from fully loaded 18-wheelers gradually works gate posts loose from shallow, aging concrete footings. We can reliably predict that failure mode on any gate within a block of those corridors.
Our Main Maywood Services
Most Maywood homeowners call us for one of two reasons: a gate that no longer opens or closes dependably, or an electric operator that has stopped responding. Each service has its own Maywood page so you can read the specifics, local pricing, and what to expect.
Gate Repair in Maywood
Gate repair in Maywood usually means hinges that have worn into an oval from years of daily cycling, a frame that drags on the driveway because the post has settled, or rollers that have stripped out. On older properties we also see the gate itself rusted through at the bottom rail where standing water and Vernon-adjacent air have done their slow work. The repair starts with the post, not the panel. Read the full breakdown on our Gate Repair in Maywood page.
Gate Installation in Maywood
New gate installation in Maywood begins with a property survey and a straight edge against the existing post. On a 25-foot-wide lot there is rarely room to reposition anything, so the new gate has to fit the exact opening, account for settled posts, and leave swing clearance for a compact driveway. We coordinate the site measure, the fabrication or sourcing, and the installation as one written quote. See the full process on our Gate Installation in Maywood page.
Electric Gate Repair in Maywood
Electric gate repair in Maywood often traces back to a control board that has never been protected from marine-layer moisture, a safety edge that has hardened and cracked in the sun, or a limit switch that lost its setting from truck vibration. We diagnose the operator and the wiring before quoting, and we service the major brands most Maywood properties already have. Details and pricing are on our Electric Gate Repair in Maywood page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Maywood
Our technicians carry service training across nine major gate-operator brands, including FAAC, BFT, Linear, and Viking. We stock common control boards, remote receivers, and safety-edge hardware locally, so most Maywood repairs finish in a single visit. See the full list on our brands page.
Pricing for Gate Company in Maywood, CA
| Service | Typical range in Maywood |
|---|---|
| Gate repair service call and diagnosis | $79-$129 |
| Hinge replacement (wrought-iron or steel) | $180-$340 per pair |
| Sagging gate correction and re-hang | $240-$460 |
| Post re-anchoring into existing concrete | $320-$580 |
| Full post replacement (steel or masonry) | $600-$1,100 |
| Roller and track replacement | $220-$410 |
| Weld repair and rust-through patch | $150-$380 |
| Gate installation (standard single swing) | $1,400-$2,900 |
| Gate operator (actuator) replacement | $850-$1,800 |
| Control board and receiver replacement | $350-$750 |
| Safety edge and photo eye replacement | $280-$520 |
| Full electric gate system install | $2,800-$6,000 |
What pushes a Maywood price toward the upper end is usually the post. Six-decade-old concrete that has spalled or settled adds re-anchoring or full replacement work that a newer suburb would not need. Every figure above is a written range, and the price you approve before the work starts is the price you pay. Nothing changes at the door.
Neighborhoods We Serve in Maywood
We cover all of Maywood, from the streets bordering Vernon along Slauson Ave and Atlantic Blvd to the residential blocks south of Maywood Park and the homes along the LA River side. Response time across the city is typically same day for most repair calls.
- Streets bordering Vernon along Slauson Ave and Atlantic Blvd
- Residential blocks south of Maywood Park
- Homes along the LA River side
- The 1940s bungalow streets between Slauson and Maywood Ave
Service Area – Cities Near Maywood
Our Maywood crews also cover the neighboring communities in this part of southeast LA County. We regularly work in Bell, CA, Huntington Park, CA, Bell Gardens, CA, and South Gate, CA. If you are on the edge of Maywood or just over a city line, call us and we will tell you straight whether we can get a crew to you.
Serving Maywood, CA - Our Local Coverage Area
We’re based in the Maywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Maywood
Most repair calls in Maywood can be seen the same day, especially sagging panels, hinges that have let go, or a gate that will not close. We schedule a real arrival window when you call, and the crew shows up in that window. Call (940) 412-7340 and we’ll give you a time before you hang up.
Like most LA County cities, Maywood generally does not require a permit for repairing an existing gate or swapping a gate operator. A full replacement that changes the footprint or blocks a public right-of-way can need review. We’ll flag it during the estimate if your project falls into that category.
We cover the whole city, including the dense bungalow blocks and the streets that border Vernon. The scheduling is coordinated from a Los Angeles office and crews serve Maywood locally. Call (940) 412-7340 and we’ll give you a straight answer on timing and a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Maywood Customers Say
"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti"Good repair on a sagging gate and a new hinge welded on. Took them a couple days to get the part in, but they told me that up front and it's been solid since."
- Hector Villanueva