Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Arlington, WA
Gate repair in Arlington, WA is shaped by one thing more than any other: the Stillaguamish Valley’s wet winters and the way they work on wooden posts, steel hinges, and the electronics inside your gate operator. Most Arlington homes were built between the 1970s and early 2000s, which means the original gate hardware is now 20 to 50 years old. That’s the age when post footings start to loosen, swing-gate hinges sag, and control boards fail without warning. Call (940) 412-7340 and you’ll get a live person, not a voicemail tree. We’re Portcullis Gate Repair, an independently owned Kingswell company, and we serve Arlington with the same written guarantee on every job: the price before work starts, a real arrival window, a clean job site, and a written 365-day guarantee.
Why Arlington Homes Are Different
Arlington sits on the floodplain edge of the Stillaguamish River, and the soil here is a mix of glacial till and river silt that holds water through the winter and hardens in summer. That cycle works on gate posts like a slow pry bar. A post set in 1995 has been through thirty winters of saturation and thirty summers of drying out, and the movement shows up as a gate that used to swing freely but now scrapes the latch post. We see it most in the older neighborhoods around downtown and along 67th Avenue NE, where the original cedar posts were set directly in soil without concrete collars. Wood fences and swing gates dominate Arlington’s housing stock. The newer subdivisions near Haller Middle School and up toward the airport added ornamental iron and automated driveway gates in the late 1990s and 2000s, and those gates are now entering their first major repair cycle. HOA rules add a layer here that doesn’t exist in most of Snohomish County: several of Arlington’s master-planned communities require written architectural committee approval before an operator can be swapped for a different brand or model. We check that before we order parts, not after.
Our Main Arlington Services
Arlington homeowners most often call us for two kinds of work: a gate that no longer opens or closes properly, and an electric operator that has stopped responding entirely. Each of these has its own Arlington page with pricing, timelines, and the specifics of how the job goes.
Gate Repair in Arlington
A sagging gate in Arlington usually comes down to two things: hinge hardware that has worn out, or a post that has begun to lean from winter soil movement. We repair swing gates and slide gates of all types, from wood privacy gates on cedar posts to ornamental iron driveway gates. The most common Arlington repair is a hinge re-alignment on an older gate whose post has drifted out of plumb. We set the post, re-hang the gate, and adjust the latch so the gate closes properly. Every repair is quoted in writing before we start, and every repair carries the Kingswell Guarantee. Read the full scope on our Gate Repair in Arlington page.
Gate Installation in Arlington
New gate installation in Arlington means choosing a gate that fits both the opening and the way this valley’s weather treats steel and wood. We install swing gates, slide gates, and pedestrian gates, and we set posts deeper than the original builders did, with proper drainage so winter saturation doesn’t start shifting things in the first season. If your HOA requires a specific material or style, we work within that spec from the start. Each installation is measured, priced in writing, and scheduled after you approve the quote; this is not same-day work. Details on materials, timeline, and what a full install includes are on our Gate Installation in Arlington page.
Electric Gate Repair in Arlington
Electric gate repair in Arlington usually starts with the operator, the motorized box that opens and closes the gate. Rain and condensation work their way into outdoor-rated electronics over time, and Arlington’s wet winters accelerate that. We diagnose the operator, the safety edges, the keypad, and the wiring, then quote the repair in writing before any work begins. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, so the technician who arrives already knows the system on your property. The full breakdown for electric work is on our Electric Gate Repair in Arlington page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Arlington
We service the brands Arlington homes actually have installed: Viking for older tract-home swing openers, Ghost Controls and DoorKing for newer automation, and Elite for slide gates on larger lots. We stock common parts in our service vehicles, which means many Arlington repairs are resolved on the first visit. See the full list on our brands page.
Pricing for Gate Company in Arlington, WA
| Service | Typical range in Arlington |
|---|---|
| Swing gate hinge replacement | $180-$340 |
| Gate post re-setting (wood post, concrete collar) | $280-$520 |
| Gate frame repair (welded steel) | $220-$460 |
| Slide gate roller replacement | $190-$380 |
| Gate latch and strike repair | $120-$260 |
| Wood gate replacement (standard 6 ft) | $450-$950 |
| Gate operator replacement (swing, single) | $750-$1,400 |
| Gate operator replacement (slide) | $900-$1,700 |
| Control board replacement | $260-$520 |
| Safety edge replacement | $160-$320 |
| Keypad and receiver replacement | $150-$310 |
| Full electric gate system (operator, edges, keypad, wiring) | $1,600-$3,200 |
Prices in Arlington run toward the middle of these ranges for standard tract-home gates, and toward the upper end when soil movement has damaged a post footing or when an HOA requires a specific operator brand that isn’t the least expensive option. Whatever the number is, you’ll have it in writing before we turn a single bolt. The price we quote is the price on the invoice, period.
Neighborhoods We Serve in Arlington
We serve the full Arlington area, from the older neighborhoods around downtown and the 67th Avenue NE corridor to the newer subdivisions near the airport, Haller Middle School, and up toward the Oso-Wiley line. Our response times vary with the season; summer keeps us busiest, but we answer the phone 24/7 and schedule by the arrival window we commit to.
- Downtown Arlington and 67th Avenue NE corridor
- Haller Middle School area
- Airport area subdivisions
- Bryant / Trafton corridor
- Oso and Wiley areas
Service Area – Cities Near Arlington
We also serve the communities around Arlington on every side. We cover Marysville, WA to the southwest, Granite Falls, WA to the southeast, Lake Stevens, WA to the south, and Stanwood, WA to the northwest. If your gate is failing and you’re anywhere in this part of Snohomish County, call us and we’ll give you a straight answer.
Serving Arlington, WA - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Arlington
Most Arlington repair calls are scheduled within 24 to 48 hours. Summer is our busiest season, so call as soon as you notice the gate dragging or the operator hesitating. We answer the phone live 24/7 and give you a real arrival window, not a four-hour spread.
Some do. Several of Arlington’s HOA-governed communities require written architectural committee approval before a gate operator can be replaced with a different brand or model. We check your HOA’s spec sheet before we order parts, which saves you from a removal-and-redo at your own cost. Call (940) 412-7340 and we’ll walk through it with you.
Yes. We repair and install commercial slide gates, parking lot gates, and automated entry systems for Arlington businesses and multi-tenant properties. Commercial work is quoted in writing after a site visit, and every job carries the same 365-Day Done Right Promise. Estimates are free.
If your gate is dragging, sagging, or dead, call (940) 412-7340 now. You’ll reach a live person, get a straight answer, and have a written price before any work begins. That’s the Kingswell Way, and it’s how every Arlington job goes.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Arlington Customers Say
"Gate wouldn't respond to the remote or the keypad. Turned out to be the control board. They had the part and swapped it the same visit. Quoted it first, no surprises."
- Everett Shaw"Electric gate kept doing its own thing, opening at random. The tech found a shorted sensor and a worn board, fixed both, and showed me the old parts. Price was what he quoted on the phone."
- Cassandra Pike"Installed a new gate for us after the old wooden one rotted out. Clean work, showed up on time both days, and the written price didn't change. It swings perfectly."
- Donna Kirkpatrick