Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in San Francisco, CA
Gate work in San Francisco is different because the city itself is different. Steep grades, salt air, tight side yards, and century-old wood all shape what breaks and why. We’re a Kingswell company, independently owned and operated, and every job we take in San Francisco starts with a written price before any work begins. Most repair calls are answered same-day, and a live person picks up the phone around the clock at (940) 412-7340.
Why San Francisco Homes Are Different
San Francisco’s residential streets rank among the steepest in the country. Gates installed on sloped driveways in Noe Valley, Bernal Heights, Russian Hill, and Twin Peaks need drop-rod hardware, non-standard hinge placement, and gravity-compensating adjustments that flat-city gate technicians never deal with. A gate that hangs perfectly on a level lot will sag, bind, or swing open uncontrolled on a 15 to 25 percent grade. That means slope-aware installation and repair is the defining skill for gate work in San Francisco, not an afterthought.
The housing stock adds another layer. Victorian and Edwardian row houses from the 1880s to 1910s dominate the Castro, Mission, and Haight. Their gates are frequently wooden, ornate, and wedged into side yards only 3 to 4 feet wide, leaving almost no room for swing arc or hardware adjustments. Out in the Sunset and Richmond, post-WWII stucco homes trend toward sliding and roll gates on tighter lots with older, corroded track systems. The marine layer keeps everything damp year-round. Wood swells and seizes against posts. Iron hinges, latches, and drop rods corrode far faster than they do inland, thanks to salt air off the Pacific and the Bay. There’s no freeze-thaw cycle to plan around, but the relentless moisture is the dominant failure driver for every gate material in San Francisco.
Our Main San Francisco Services
Most San Francisco homeowners call us for one of three things: a gate that won’t close, a gate that needs replacing on a tricky slope, or an electric operator that has stopped responding. Each has its own dedicated page below.
Gate Repair in San Francisco
Most repair calls in San Francisco come down to wood swollen by marine-layer moisture, corroded iron hardware, or a gate that has sagged on a sloped driveway. We start by finding out what actually moved, what seized, and what was never right for the grade in the first place. Then we quote the fix in writing before touching a single bolt. If we’re repairing a gate on a 14 percent grade in Russian Hill, we’re adjusting for gravity first, not just replacing a hinge and hoping. Gate Repair in San Francisco
Gate Installation in San Francisco
A new gate in San Francisco has to fit the lot it’s going into, not just the opening it’s filling. Narrow side yards between attached row houses, steep driveway pitches, and HOA design rules all shape the job. We measure on site, quote in writing, and build the installation around the actual grade and swing clearance, not a catalog photo. Wood, steel, and sliding configurations are all options, and we’ll tell you which ones hold up best against salt air in your specific neighborhood. Gate Installation in San Francisco
Electric Gate Repair in San Francisco
On San Francisco’s steepest driveways, automatic gate operators must be rated and programmed for slope load. Standard self-closing spring hinges will either slam the gate violently downhill or fail to close it at all uphill. Homeowners often chase an electrical fault when the real issue is hardware and gravity. Our technicians work on nine major operator brands and diagnose the full system before quoting. Electric Gate Repair in San Francisco
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in San Francisco
Our technicians carry parts for FAAC, BFT, Linear, and Viking operators, among others, and arrive already familiar with the system on the property. Most brand-specific parts are stocked in the Bay Area and can be on site the same day. See our brands for the full list.
Pricing for Gate Company in San Francisco, CA
San Francisco pricing is set by the job, and the job is set by the site conditions. We quote in writing before work starts, so the number below is what you’ll actually see on the invoice.
| Service | Typical range in San Francisco |
|---|---|
| Gate repair diagnostic visit | $85-$165 |
| Wood gate realignment and hinge adjustment | $225-$450 |
| Swing gate hinge replacement (typical residential) | $180-$360 |
| Drop rod replacement or adjustment | $160-$320 |
| Automatic gate operator diagnosis | $120-$240 |
| Electric gate operator swap (parts and labor) | $650-$1,400 |
| Sliding gate track repair or replacement | $350-$900 |
| Wood gate replacement (standard 4-5 foot opening) | $1,100-$2,600 |
| Steel gate replacement (custom size) | $2,500-$6,000 |
| Sloped driveway gate installation (adds to base) | $350-$1,200 |
In San Francisco, the biggest price drivers are slope, access, and material condition. A steep Noe Valley driveway adds hardware and labor that a flat lot in the Sunset won’t need, and a 120-year-old wooden gate that has been absorbing marine moisture for decades often costs more to repair than a newer gate would. Whatever the job, the price we quote is the price you approve or we don’t start. That’s The Kingswell Way.
Neighborhoods We Serve in San Francisco
We cover the entire city, from the hillside lots of Twin Peaks to the row-house side yards of the Mission. Most San Francisco neighborhoods are within a 45-minute dispatch window, and crews arrive with the van stocked for common gate and operator failures. Here are a few of the neighborhoods we serve most often:
- Noe Valley
- Bernal Heights
- Russian Hill
- The Castro
- The Sunset
Service Area – Cities Near San Francisco
Our San Francisco crews also handle jobs in the surrounding cities along the Peninsula and across the northern Bay. If you’re just outside the city limits, chances are we can reach you the same day. We regularly serve Daly City, CA, Brisbane, CA, Sausalito, CA, and South San Francisco, CA.
Serving San Francisco, CA - Our Local Coverage Area
We’re based in the San Francisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Francisco
We answer the phone live 24 hours a day and can typically dispatch a San Francisco-based technician the same day for repair calls. Installation and replacement work is scheduled, with a real arrival window confirmed before the day of the job. Call (940) 412-7340 and we’ll give you an honest time frame.
Most standard residential gate replacements don’t require a permit, but some HOA-governed neighborhoods in San Francisco have design review rules that do. If your property falls under HOA oversight, we’ll work with the requirements you provide. We handle the gate; you handle the paperwork.
We serve the entire city of San Francisco with the same pricing structure and same written guarantee. Hillside neighborhoods like Russian Hill and Twin Peaks take a little more planning, but the rate for any given repair is the same regardless of where in the city you live. Call us for an exact quote, and you’ll have it in writing.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Francisco Customers Say
"Our driveway gate stopped halfway and wouldn't close, which is a problem when it's the only thing between the street and the yard. They came out same day, replaced the motor, and it's smooth again."
- Leonard Pace"Gate wouldn't respond to the remote or the keypad. Turned out to be the control board. They had the part and swapped it the same visit. Quoted it first, no surprises."
- Everett Shaw"Electric gate kept doing its own thing, opening at random. The tech found a shorted sensor and a worn board, fixed both, and showed me the old parts. Price was what he quoted on the phone."
- Cassandra Pike