Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Maltby, WA
Gate repair in Maltby, WA means something different than it does ten minutes west in Bothell. Nearly every property here sits on a large rural parcel with a long driveway, an older farm gate or a retrofitted automatic operator, and posts that were never meant to carry motorized hardware. Heavy rainfall, valley fog, and winter freeze cycles work on the metal year-round. We’re a Kingswell company, and every Maltby job starts with a written price before any work begins. Call (940) 412-7340 and you’ll reach a live person, 24 hours a day.
Why Maltby Homes Are Different
Maltby is unincorporated Snohomish County acreage country. Properties are mostly 1990s and 2000s custom builds and older mid-century farmhouses on one to ten acres, with outbuildings, horse paddocks, and long gravel driveways. Most parcels have at least one vehicular gate, and many have two or three: driveway, pasture, equipment area. These are working gates, opened and closed multiple times a day, often by a truck, a trailer, or a tractor.
The climate does no favors to gate hardware. Maltby sits in the foothill transition zone and catches more rain than lower-elevation cities, with persistent valley fog along the Little Bear Creek corridor keeping hinges, latches, and operator mounts wet for months at a time. That accelerates rust faster than most owners expect. Winter also brings enough hard freezes to seize automated operators and crack the wooden boards common on equestrian-property gates.
The pattern we see most often: a homeowner buys an electric opener and calls to have it fitted to a 40-year-old steel pipe or board gate that was built for a manual latch. The posts were never engineered for the torque of an actuator, the motorized arm that pushes or pulls the gate. Before an operator can be mounted reliably, posts usually need to be re-set in concrete or sister-posted, which turns what looked like a quick retrofit into a proper structural job.
Our Main Maltby Services
The two calls we get most in Maltby are for dead electric operators and for gates that have sagged off their hinges on rotted or undersized posts. Here’s what each one involves locally.
Gate Repair in Maltby
Swing and slide gates on Maltby acreages take real abuse, and most repairs here start with the post or the hinge, not the gate leaf itself. The leaf is the moving panel; the post is what it hangs from. Our technicians work on sagging gates, seized hinges, cracked welds on steel pipe frames, rotted wooden boards, and latch failures. Because so many Maltby gates were built before motorized hardware existed, we often reinforce or re-set posts as part of the repair. Every fix is quoted in writing before we touch anything. Gate Repair in Maltby
Gate Installation in Maltby
Most Maltby installations are heavy driveway gates built for daily vehicular use, not lightweight garden gates. We measure the opening, check the soil and frost depth, and build posts that will hold an operator through a wet Snohomish County winter. You’ll get a written price covering materials, concrete, hardware, and labor before any work starts. If the gate is replacing a farm-era one, we’ll talk through whether the old posts can be reused or should come out. Gate Installation in Maltby
Electric Gate Repair in Maltby
Maltby’s damp winters and hard freezes are hard on gate electronics. We repair and replace actuators, control boards, photo-eye safety sensors, remote receivers, keypads, and loop detectors, the buried sensors that tell a gate to open when a vehicle pulls up. Moisture intrusion into the control box is the common local failure. Diagnostics are included with the visit, and the repair price is on paper before we proceed. Electric Gate Repair in Maltby
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Maltby
Our Maltby technicians carry parts and service experience for LiftMaster, Viking, Ghost Controls, DoorKing, and Elite operators. Because we train across the major brands, the truck that shows up already knows the system on your posts. Common boards, remotes, and safety sensors are stocked locally for faster turnaround. See our brands.
Pricing for Gate Company in Maltby, WA
| Service | Typical range in Maltby |
|---|---|
| Gate hinge replacement | $180-$420 |
| Sliding gate roller replacement | $220-$520 |
| Swing gate actuator swap (parts and labor) | $650-$1,400 |
| Control board replacement | $350-$850 |
| Photo-eye or safety sensor replacement | $180-$420 |
| Remote or keypad programming | $95-$250 |
| Post re-setting or reinforcement in concrete | $500-$1,200 |
| New driveway gate installation (manual) | $1,800-$4,500 |
| Full electric gate installation (automated) | $4,000-$12,000 |
The two biggest price drivers in Maltby are post condition and operator placement. Farm-era posts almost always need concrete work before a repair will hold, and long rural driveways often mean trenching to run power or sensor wire. Whatever the job, the price is written down and agreed before a single bolt is turned. No surprises at the end.
Neighborhoods We Serve in Maltby
We work across the whole Maltby area, from the acreage parcels off Highway 522 and Paradise Lake Road to the foothill properties along the Little Bear Creek corridor and the equestrian lots near the old Maltby area. Response is typically same-day or next-day for non-emergency calls, and emergency gate failures are prioritized.
- Paradise Lake Road corridor
- Highway 522 / Maltby Road intersection area
- Little Bear Creek valley
- Equestrian parcels near the Maltby area
Service Area – Cities Near Maltby
Our Maltby crews work daily here and in the surrounding Puget Sound cities. If your property is near the King or Pierce County line, we can route a technician your way. Those nearby service areas include Seattle, WA, Spokane, WA, Tacoma, WA, and Vancouver, WA. Each location has its own local page with pricing and details for that area.
Serving Maltby, WA - Our Local Coverage Area
We’re based in the Maltby area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Maltby
Most non-emergency calls in Maltby are scheduled same-day or next-day. If a gate is stuck open or stuck shut and it’s a security or livestock issue, we treat it as a priority call. The phone is answered live 24/7, so you’ll know the arrival window when you call (940) 412-7340.
Most gate repairs and operator swaps need no permit. A full replacement or new driveway gate generally doesn’t require one either, as long as the gate doesn’t affect a right-of-way or public easement. We’ll flag any concern on site before work begins, and the written quote covers everything agreed.
Yes. Maltby’s older steel pipe and rough-sawn board gates are the standard here, not the exception. Our technicians expect to re-set or sister posts before mounting an operator, and we’ll explain what’s needed in plain terms before any work starts. The price is on paper first, always.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Maltby Customers Say
"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti"Good repair on a sagging gate and a new hinge welded on. Took them a couple days to get the part in, but they told me that up front and it's been solid since."
- Hector Villanueva