Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Malibu, CA
Malibu gate work is unlike any other market in the LA metro. Between salt-laden marine air eating through hardware, Santa Ana winds knocking gates out of alignment, and custom hillside estates built around long private driveways, the equipment and the repair approach have to be chosen for this coastline. We quote Malibu jobs with that reality in mind: marine-grade hardware where it matters, operators sized for heavy custom gates, and a written price before any work starts. If your gate is failing, call us at (940) 412-7340 and a live person will pick up.
Why Malibu Homes Are Different
Malibu’s housing stock runs almost entirely to high-value custom builds: PCH beachfront homes, canyon estates along Kanan Dume and Malibu Canyon Road, and a substantial wave of post-2018 Woolsey Fire rebuilds. Nearly all of them have automated ornamental iron or architectural steel driveway gates paired with intercoms, cameras, and access control. That means most Malibu repair calls involve multi-leaf swing gates, slide gates on steep grades, or integrated smart-home systems rather than single lightweight residential gates.
The defining local condition is salt. Direct Pacific Ocean exposure and the persistent marine layer corrode gate operators, hinges, latches, and ornamental ironwork far faster than anywhere else inland. Standard residential-grade hardware that lasts a decade in Calabasas can fail within two seasons on Point Dume. Santa Ana wind events add a second failure mode: sustained gusts physically stress and misalign gates on exposed coastal bluffs and canyon ridgelines. A Malibu gate tech has to think in terms of corrosion prevention and wind load, not just parts replacement.
Our Main Malibu Services
The two calls we take most often from Malibu homeowners are a gate that stopped moving and a gate that never worked right in the first place. Here is how each one works in this city.
Gate Repair in Malibu
Most Malibu gate repair calls fall into a few familiar patterns: an operator that burned out fighting a salt-corroded hinge, a bent track on a slide gate set into a hillside, or a multi-leaf swing gate that no longer closes square after a Santa Ana event. We diagnose the mechanical problem first, then quote the fix in writing before we turn a single bolt. On PCH-frontage properties especially, we automatically price out corrosion-resistant hardware because standard parts simply do not last here. Gate Repair in Malibu covers what a typical call looks like and what it costs.
Gate Installation in Malibu
A new gate in Malibu is rarely a simple swap. Driveway spans are wider, custom steel work is heavier, and the operator has to be sized to move serious weight against coastal wind. Add the intercom and access hardware most Malibu properties already have, and the install has to be planned as a system rather than a gate plus a motor slapped on. We measure, spec marine-grade materials where the salt exposure calls for it, and quote the whole job in writing before anything is ordered. Gate Installation in Malibu walks through what a full job includes.
Electric Gate Repair in Malibu
Electric gate repair in Malibu usually comes down to one of three things: a control board that gave out, a safety sensor that has drifted out of alignment, or wiring that has quietly corroded inside a conduit after a few wet winters. The marine air is hard on low-voltage connections, and we see more intermittent “works sometimes” failures here than anywhere else in the metro. We trace the circuit, identify the exact failed component, and give you the number before we touch it. Electric Gate Repair in Malibu goes deeper on diagnosis and pricing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Malibu
Our techs service Viking, Ghost Controls, DoorKing, and Elite operators regularly in Malibu, along with the full range of major brands. Because these four dominate the local install base, we keep common boards, limits, and safety parts for them stocked and ready, which shortens turnaround for most repair calls. See the full list on our brands page.
Pricing for Gate Company in Malibu, CA
| Service | Typical range in Malibu |
|---|---|
| Slide gate roller replacement | $180-$360 |
| Swing gate hinge replacement | $220-$420 |
| Gate operator (actuator) swap | $850-$1,700 |
| Control board replacement | $380-$780 |
| Safety sensor alignment or replacement | $180-$320 |
| Track repair for slide gates | $280-$560 |
| Gate wheel and caster replacement | $190-$370 |
| Gate rewiring (low-voltage) | $240-$500 |
| Full gate installation (custom) | $4,500-$14,000 |
| Electric gate motor replacement | $900-$1,800 |
Two things push Malibu prices toward the upper end of those ranges: salt exposure and gate size. Jobs on PCH frontage or bare coastal bluffs almost always need marine-grade hardware or stainless fasteners, which cost more up front but are the difference between a repair that lasts and one that is back for replacement after one wet winter. On every job, whatever the number ends up being, you get it in writing before any work starts. No door surprises.
Neighborhoods We Serve in Malibu
We run calls across the full stretch of Malibu from the Ventura County line down through Topanga, from PCH-front beach homes up into the canyon estates. Most neighborhoods are within a one-call window for scheduling, and emergency repair trips are routed as they come in. You do not wait on a dispatch center two counties away.
- Point Dume
- Paradise Cove
- Broad Beach
- Malibu Park
- Big Rock
Service Area – Cities Near Malibu
While this page covers Malibu proper, our crews also run regular routes through the neighboring communities. If you are just over the ridge or a few miles up the coast, we can usually get to you quickly: Agoura Hills, CA, Westlake Village, CA, Thousand Oaks, CA, and Calabasas, CA. Same written-price policy applies in every one of them.
Serving Malibu, CA - Our Local Coverage Area
We’re based in the Malibu area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Malibu
For a straight repair, generally no. For a full gate replacement or any work that touches the driveway entry structure, Malibu’s permitting rules can apply, especially on PCH frontage and in the coastal zone. We will tell you plainly if your job needs a permit before you spend a dollar on parts.
For a gate that will not open or will not close and secure, we treat it as an emergency and route the nearest available tech. Most Malibu homes fall inside a one-call scheduling window during normal hours, and we answer the phone live around the clock. Call (940) 412-7340 and you will talk to a person, not a menu.
Yes, and it is the single biggest Malibu-specific factor in gate longevity. Operators on PCH frontage that are not in marine-grade or corrosion-prepped enclosures often fail within one or two rainy seasons. We quote and spec for that reality from the first visit, which is why our cost ranges sometimes sit higher than inland neighbors.
Call us at (940) 412-7340 for a free estimate on any Malibu gate job. Written price before work starts, a real arrival window, and a 365-day written guarantee on every repair.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Malibu Customers Say
"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti"Good repair on a sagging gate and a new hinge welded on. Took them a couple days to get the part in, but they told me that up front and it's been solid since."
- Hector Villanueva