Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Allen, TX
Gate repair in Allen, TX is mostly about one thing: ornamental iron driveway gates and community entry systems that were installed during the city’s big subdivision boom and are now reaching the end of their service life at the same time. The 1995 to 2015 building wave packed Allen with HOA communities like Twin Creeks, Starcreek, and Montgomery Farm, each with deed-restricted gate standards and operators that are now 15 to 25 years old. When those operators fail, homeowners call us at (940) 412-7340 and we give them a written price before any work starts.
Why Allen Homes Are Different
Allen’s housing stock is overwhelmingly brick-facade tract and semi-custom homes built inside deed-restricted subdivisions, and the vast majority include powder-coated ornamental iron driveway gates specified to HOA standards. Those gates are driven by swing-gate operators, typically LiftMaster, Ghost Controls, or Viking units installed in the 2000s, and they are now failing in clusters. A technician working Starcreek or Chase Oaks in a single week will often find the same model-year operator with the same failed logic board across multiple adjacent homes. That pattern shapes how we stock parts for Allen jobs.
The other thing that makes Allen different is the soil. Collin County’s expansive black clay shrinks hard during hot, dry summers and swells after spring rains. Gate posts heave and tilt seasonally. A swing gate that latched cleanly in April will routinely drag the ground or gap at the latch by late August, and that post-realignment call is independent of the gate hardware itself. It recurs, year after year, unless the post is reset properly the first time.
Our Main Allen Services
Allen homeowners call us most about two things: a gate that has stopped opening and a gate that was never installed right in the first place. Each service has its own Allen page with pricing, timing, and what to expect.
Gate Repair in Allen
Most repair calls in Allen are swing-gate operators with dead logic boards, stripped drive gears, or actuators (the motorized arm that physically pushes the gate open) that have worn out after years of Collin County heat. We repair the operator, the hinge hardware, the post alignment, and the gate itself, and we carry parts for the specific model-year hardware that Allen’s 2000s subdivisions were built with. If you have an iron driveway gate that will not open, drags at the latch, or slams at the end of its travel, the details are on the Gate Repair in Allen page.
Gate Installation in Allen
New gate installation in Allen usually means matching a replacement driveway gate to existing HOA fence standards, or replacing a wood rear-yard gate with something that will not sag in five years. We measure, order, and schedule the install, and the job includes setting posts deep enough to handle the black-clay heave that shifts shallow footings. The work is quoted and scheduled, not dispatched same-day. The full scope, from first measure to final walkthrough, is on the Gate Installation in Allen page.
Electric Gate Repair in Allen
Electric gate repair in Allen often starts with a homeowner hearing the operator hum but the gate will not move, or finding the gate dead at the keypad with no response. We diagnose the operator, the access-control board, the photo eyes, and the power run to the gate, then give you a written price before we turn a single bolt. If a buried low-voltage line has been chewed or pinched, we find it and fix it. The full breakdown of what we troubleshoot and what it costs is on the Electric Gate Repair in Allen page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Allen
Our Allen technicians carry parts for the operator brands most common in the city’s 2000s-era subdivisions, including LiftMaster, Ghost Controls, Viking, and Linear. Because those units fail in clusters, we keep the boards, gears, and actuators for that specific era of hardware on the truck. You can see the full list on our brands page.
Pricing for Gate Company in Allen, TX
| Service | Typical range in Allen |
|---|---|
| Swing gate actuator replacement | $480-$850 parts and labor |
| Gate operator circuit board replacement | $290-$520 |
| Gate hinge replacement (pair) | $180-$380 |
| Gate post realignment (single post) | $220-$450 |
| Photo eye / safety sensor replacement | $150-$300 |
| Keypad or access-control board replacement | $220-$490 |
| Drive gear or sprocket replacement | $250-$480 |
| Low-voltage wiring trace and repair | $180-$380 |
| Gate wheel or roller replacement | $120-$260 |
What pushes a price up in Allen is almost always a post that has moved. If the black clay has heaved the post out of plumb, the realignment has to happen before any new actuator or hinge goes on, and that adds time and sometimes a new footing. Every price we quote is written down and agreed to before we start, and the Kingswell Guarantee is on the invoice.
Neighborhoods We Serve in Allen
We work across Allen’s HOA-governed subdivisions, and most of our calls come from the communities built during the city’s boom years. Response time across Allen is typically same-day or next-day for repair work, and installation visits are scheduled at the quote.
- Twin Creeks
- Starcreek
- Montgomery Farm
- Chase Oaks
- Watters Crossing
Service Area – Cities Near Allen
If you are just outside Allen, we also serve Plano, TX, McKinney, TX, Wylie, TX, and Sachse, TX. Dispatch and scheduling are coordinated from the Dallas-Fort Worth office, and crews serve Allen locally.
Serving Allen, TX - Our Local Coverage Area
We’re based in the Allen area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Allen
For repair calls, we can usually get a technician to an Allen home the same day or the next morning. You will get a real arrival window, not a four-hour range or a “between 8 and 5” promise, and a live person answers the phone 24 hours a day at (940) 412-7340.
Most Allen HOAs treat repair of an existing gate as maintenance, not a modification, so approval is rarely needed. Replacement gates or changed gate styles may need submission. We can tell you what your specific community typically requires when we come out for the quote.
Yes. Every Allen repair carries the 365-Day Done Right Promise in writing. If the repair fails inside that year, we come back and fix it at no charge. That includes the return visit, and it is stamped on the invoice when the work is done.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Allen Customers Say
"Gate wouldn't respond to the remote or the keypad. Turned out to be the control board. They had the part and swapped it the same visit. Quoted it first, no surprises."
- Everett Shaw"Electric gate kept doing its own thing, opening at random. The tech found a shorted sensor and a worn board, fixed both, and showed me the old parts. Price was what he quoted on the phone."
- Cassandra Pike"Installed a new gate for us after the old wooden one rotted out. Clean work, showed up on time both days, and the written price didn't change. It swings perfectly."
- Donna Kirkpatrick