Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Argyle, TX
Gate repair in Argyle, TX comes with a distinct set of demands that separate it from work in Flower Mound or Denton. Most homes here sit on 2 to 10 acre lots with long private driveways, and the gates at those entries are built for horse trailers, feed trucks, and ranch work more than for passenger cars. The Blackland Prairie clay under Denton County also shifts constantly, throwing posts out of plumb and openers out of calibration. If your gate is acting up in Argyle, call us at (940) 412-7340 and we’ll give you a written price before any work starts.
Why Argyle Homes Are Different
Argyle sits in Denton County’s horse-country corridor, where a large share of properties are multi-acre equestrian estates. The gates here aren’t decorative afterthoughts. They’re working ranch infrastructure. A typical Argyle gate might open and close a dozen times a day for horse trailers, hay deliveries, farriers, and tractors, and that repeated heavy use stresses hinges, operators, and welds in ways a suburban gate in Flower Mound never sees.
The soil compounds the problem. Denton County’s expansive clay, the same shrink-swell Vertisol that cracks foundations across the region, pushes and pulls at gate posts as it dries in summer and re-saturates in spring. A gate that latched cleanly in March can be two inches out of plumb by July, and the fix usually isn’t a new operator, it’s getting the post right first. We see this pattern constantly in Argyle, and it shapes how we diagnose every job here.
The housing stock adds another wrinkle. Older estate properties along FM 407 and the roads branching off US-377 often have heavy ornamental iron or tubular-steel gates that were installed a decade or more ago, while newer large-lot subdivisions built since the 2010s brought a wave of modern automated driveway gates. That mix means one Argyle call might involve a mid-2000s swing operator that’s finally worn out, and the next might be a brand-new automation that was never adjusted properly for the clay soil.
Our Main Argyle Services
Most Argyle homeowners call us for two things: a gate that has stopped working and needs repair, or a new gate installation on a property that’s never had one or needs a full replacement. Here’s what each involves in this part of Denton County.
Gate Repair in Argyle
Most repair calls in Argyle start with a gate that won’t open, won’t close, or has begun grinding and straining against a shifted post. The clay soil is often the root cause, even when the symptom looks electrical. We inspect the full mechanical picture: the hinges, the post alignment, the chain or actuator, and the operator. In Argyle we regularly replace worn hinge bearings, straighten leaning posts, and repair cracked welds on heavy steel gates that take daily ranch traffic. Gate Repair in Argyle covers this work in detail, including same-week response for a gate that’s stuck open or closed.
Gate Installation in Argyle
New gate installation in Argyle usually means a custom swing or slide gate built for a wide driveway entrance, often with automation included from the start. The soil here matters at install time as much as at repair time. We set posts deeper than standard, use concrete piers sized for the heavy gates common in the equestrian areas, and account for the seasonal clay movement so the gate doesn’t bind in its first summer. Gate Installation in Argyle walks through what a full install includes and what to expect on an estate lot.
Electric Gate Repair in Argyle
Electric gate repair in Argyle often means diagnosing a system where the motor runs but the gate doesn’t move, or the gate stops mid-cycle and reverses. On estate properties with long driveways, we also troubleshoot wiring runs that can span a hundred feet or more from the house to the gate. The same clay-soil post movement that affects mechanical alignment also throws limit switches and safety edges out of position. Electric Gate Repair in Argyle covers operator diagnostics, wiring repair, and recalibration for automated systems on ranch and residential properties.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Argyle
We service most gate operators found in Argyle, including Linear, Viking, Ghost Controls, and DoorKing. Our technicians carry common replacement parts for these brands on the truck, which often lets us complete the repair in one visit. For less common parts, we can usually source them within a few days. See our brands page for the full list of systems we work on.
Pricing for Gate Company in Argyle, TX
| Service | Typical range in Argyle |
|---|---|
| Service call / diagnostic visit | $85-$125 |
| Hinge replacement (single swing gate) | $275-$450 |
| Hinge replacement (pair, ornamental steel) | $450-$750 |
| Swing gate actuator replacement (residential) | $650-$1,100 |
| Swing gate actuator replacement (heavy-duty estate) | $1,200-$2,000 |
| Slide gate motor replacement | $850-$1,600 |
| Gate operator installation (new, with arm/chain) | $900-$1,800 |
| Gate post reset / straightening | $400-$800 |
| Weld repair (cracked frame or hinge) | $150-$400 |
| Full automation retrofit (existing manual gate) | $1,800-$3,500 |
In Argyle, the biggest price drivers are gate weight and post condition. A heavy ornamental iron gate on a shifting clay-soil post costs more to repair than a lighter tubular gate on stable ground, because the fix often includes both the mechanical work and the post reset. Every price above is a range, not a guess. You’ll get the exact number in writing before we start, and that number won’t change when the invoice comes.
Neighborhoods We Serve in Argyle
We work throughout Argyle and the surrounding parts of Denton County, including the estate communities along FM 407, the newer subdivisions off US-377, and the rural roads east and west of town toward Bartonville and Copper Canyon. If you’re within a short drive of Argyle, we can usually schedule you within the week.
- Harvest
- The Hills of Argyle
- Country Lakes
- Crawford Ranch
- Canyon Falls
Service Area – Cities Near Argyle
Portcullis Gate Repair serves Argyle and its neighboring communities across the north Dallas-Fort Worth area. Our crews cover Flower Mound, TX, Roanoke, TX, Lake Dallas, TX, and Denton, TX with the same written-price guarantee and 365-Day Done Right Promise that applies in Argyle. Scheduling is coordinated from our Dallas-Fort Worth office, with local crews dispatched to Argyle homes and ranches.
Serving Argyle, TX - Our Local Coverage Area
We’re based in the Argyle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Argyle
Most non-emergency repair calls in Argyle can be scheduled within the same week, and often sooner. If your gate is stuck open or won’t close at all, call us at (940) 412-7340 and we’ll tell you the soonest available window. Every appointment comes with a real arrival window, not a four-hour guess.
Many Argyle subdivisions and estate communities have HOA or deed restrictions on gate height, material, and appearance, especially for front-entry driveway gates. If you’re installing a new gate, check your community’s guidelines before we begin. For repairs that restore the existing gate, approvals are rarely needed.
Yes, and it’s a big part of our Argyle work. We routinely service and install swing and slide gates on multi-acre horse properties, including heavy-duty operators sized for frequent daily use. The written guarantee applies the same to a ranch gate as it does to a residential gate in a subdivision.
If your Argyle gate is giving you trouble, call (940) 412-7340 and tell us what’s happening. We’ll answer live, schedule a window that works, and give you a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Argyle Customers Say
"The opener gave out and we were manually pushing the gate for a week. Portcullis got us in quick, swapped the opener, and set up the remotes for both our cars. Great to have it working again."
- Priscilla Nava"Our driveway gate stopped halfway and wouldn't close, which is a problem when it's the only thing between the street and the yard. They came out same day, replaced the motor, and it's smooth again."
- Leonard Pace"Gate wouldn't respond to the remote or the keypad. Turned out to be the control board. They had the part and swapped it the same visit. Quoted it first, no surprises."
- Everett Shaw