Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Converse, TX
Gate repair in Converse comes down to one local fact: the Blackland Prairie clay under this city moves, and it moves a lot. Most Converse homes were built between the 1980s and 2000s as tract housing near Joint Base San Antonio-Randolph, and the wooden swing gates installed back then are now 20 to 40 years old. We regularly see gates that drag, latches that no longer line up, and posts that lean a few degrees off plumb because the ground beneath them has shifted through too many drought-and-rain cycles. If your gate is fighting you, call us at (940) 412-7340 and we’ll give you a straight answer and a written price.
Why Converse Homes Are Different
Converse sits on expansive clay soil that shrinks during Bexar County’s long summer droughts and swells fast when the rains return. That is not a minor detail. It is the single biggest reason gate repairs here repeat. A drought pulls the clay away from a fence post, and the next heavy storm makes it swell and shove that same post sideways. We have seen concrete footings sheared clean off their bolts inside a single wet season. Gates that were level in March are dragging by September, through no fault of the hardware.
The housing stock amplifies the problem. Most original Converse gates went in with shallow post holes and standard footings, sized for a soil type that was never going to hold still. Add 20 to 40 years of cedar boards warping in the South Texas heat, and a gate that looks like it just needs a new latch is often hiding a leaning post, corroded hinges, and a cracked bottom rail. The military families near JBSA-Randolph who rotate out every two to three years on PCS orders often inherit this deferred maintenance, so we are used to finding three problems behind the one that prompted the call. Durable Converse repairs mean deeper post holes and wider concrete footings built for the shrink-swell cycle, not just a fresh set of hinges.
Our Main Converse Services
Most Converse homeowners call us for one of three things: a wooden swing gate that will not close, a full replacement gate, or an electric opener that has stopped responding. Each has its own page with local pricing and detail.
Gate Repair in Converse
Repair work here usually starts with realignment. The clay soil under Converse pushes posts out of plumb on a seasonal cycle, which throws hinges, latches, and strike plates out of alignment. We reset posts in deeper holes with wider footings, replace corroded hardware, and rebuild sagging cedar frames so the gate swings clean instead of dragging across the concrete. Every repair includes a written price before we touch a bolt, and the work is covered by a 365-day written guarantee. If the fix fails inside that year, we come back at no charge. See Gate Repair in Converse for local pricing and the full scope of what we handle.

Gate Installation in Converse
New gate work in Converse is a different animal from replacing hardware on an old one. The clay soil means a proper install is not just digging a hole and pouring concrete. It means deeper post holes, wider footings, and sometimes a steel post jacket to resist the seasonal heave. We measure, quote a written price that covers everything from post removal to hardware, and schedule the work so you know exactly when the crew arrives. We install swing and sliding gates in cedar, steel, and aluminum. See Gate Installation in Converse for what a full installation includes and what it costs here.

Electric Gate Repair in Converse
When an electric gate stops opening, Converse homeowners are usually looking at one of three things: a dead actuator, a controller board that lost its programming, or a safety sensor knocked out of alignment. We arrive knowing the system on your property, because our techs are trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. We diagnose first, explain what failed in plain terms, and quote the repair in writing before starting. See Electric Gate Repair in Converse for board-swap and actuator pricing specific to this area.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Converse
Our techs are trained across nine gate-operator brands, and the ones we see most on Converse homes are FAAC, BFT, Linear, and Viking. That matters because the arriving tech already knows the system, so diagnosis happens faster. See our brands for full coverage.
Pricing for Gate Company in Converse, TX
| Service | Typical range in Converse |
|---|---|
| Gate realignment & post reset | $180-$340 |
| Hinge replacement (pair, steel) | $90-$180 |
| Swing gate latch replacement | $80-$160 |
| Cedar board-on-board gate rebuild | $450-$1,100 |
| Actuator arm replacement (parts & labor) | $350-$700 |
| Control board replacement | $250-$600 |
| Safety sensor alignment or replacement | $120-$250 |
| Full electric gate installation (single swing) | $1,800-$4,500 |
| Full sliding gate installation | $2,500-$6,500 |
What pushes a Converse price toward the top of a range is usually what is underground. A post that has been crawling sideways for years needs a deeper hole and a wider footing, and that means more concrete, more labor, and sometimes a steel post jacket. The price you approve is the price you pay – we put it in writing before any work starts, and we do not add surprises at the end.
Neighborhoods We Serve in Converse
We cover the full Converse city area, from the older subdivisions east of FM 1976 to newer developments closer to JBSA-Randolph. Our dispatch is coordinated from the brand’s San Antonio office, so a Converse call usually gets a tech on site within the same day for urgent repairs.
- Northampton
- Kupres Estates
- Woodlake
- Bentwood Ranch
- Valencia
Service Area – Cities Near Converse
We also serve the neighboring communities around Converse, including Universal City, TX, Schertz, TX, Cibolo, TX, and San Antonio, FL. Same booking number, same written guarantee, same Kingswell standard on every job.
Serving Converse, TX - Our Local Coverage Area
We’re based in the Converse area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Converse
For urgent gate repairs, most Converse calls get a tech on site the same day. Dispatch runs from our San Antonio office, and we give you a real arrival window when you book, not a vague “sometime this afternoon.” Call (940) 412-7340 and we’ll tell you exactly when to expect us.
Some Converse HOAs have design standards for front-yard gates and fence styles, especially in newer subdivisions. We recommend checking your community’s rules before a full replacement. For repairs that keep the existing gate structure, approval is rarely required. We can work from your HOA’s spec sheet if one is provided.
A leaning post means the clay under it has shifted, and tightening a few bolts will not fix it. The post needs to be dug out, re-set plumb in a deeper hole, and anchored with a wider concrete footing sized for Converse’s shrink-swell clay. We quote that work in writing before starting, and it is covered by the 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Converse Customers Say
"Installed a new gate for us after the old wooden one rotted out. Clean work, showed up on time both days, and the written price didn't change. It swings perfectly."
- Donna Kirkpatrick"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti





Before
After
Before
After
Before
After