Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Edgewood, WA
Gate repair in Edgewood looks different than it does in the denser cities nearby. Here, the work skews toward heavy agricultural swing gates, long driveway entry systems, and equestrian paddock gates, most mounted on acreage parcels with clay-heavy soil that moves every wet season. That means the gate company you call needs to understand post heave, oversized gate leaves, and operators that have been running since the 1990s. We do. Call (940) 412-7340 when a gate stops swinging, sagging, or opening, and we’ll give you a written price before any work starts.
Why Edgewood Homes Are Different
Edgewood is one of the few incorporated cities in Pierce County still dominated by horse properties, hobby farms, and acreage parcels. Most homes sit on an acre or more, built between the 1970s and early 2000s as a semi-rural retreat between Auburn and Puyallup. The gates those properties carry are heavier and wider than anything you’d find on a standard suburban lot, often mounted on oversized posts set into soil that doesn’t stay put.
The clay-heavy soils on the Puyallup Valley bench are the quiet culprit behind a lot of what we fix. Through wet winters, with over 40 inches of annual rain saturating the ground, gate posts heave and shift. A gate that latched cleanly in August will drag or bind by February. Equally common here: wood posts rotting at the ground line, hinges and latches rusting on exposed steel, and control boards taking on moisture inside long gravel driveway runs. Edgewood jobs are rarely just “tighten a hinge” jobs. They’re seasonal-movement jobs, and that changes how we diagnose and what we quote.
Our Main Edgewood Services
Most Edgewood calls fall into one of two buckets: a gate that won’t open at all, or a motorized system that has finally reached the end of its service life. Each service has its own page with full pricing and details.
Gate Repair in Edgewood
Heavy swing gates on acreage lots work their hinges, latches, and posts hard, especially when clay soil shifts under them every winter. We rebuild sagging frames, reset leaning posts, replace seized hinges and latches, and weld cracks before they turn into a gate lying in the driveway. Every repair in Edgewood carries a written 365-day guarantee. Gate Repair in Edgewood covers the full scope and what a typical repair costs.
Gate Installation in Edgewood
New gates in Edgewood need to account for what the ground will do over the next decade, not just what it’s doing on install day. We size posts for the soil, spec hardware for a gate that weighs several hundred pounds, and plan for drainage so water doesn’t pool at the post base. If you’re replacing a 20-year-old farm gate or adding an entry system to a new build, Gate Installation in Edgewood walks through what a full job includes.
Electric Gate Repair in Edgewood
A large share of Edgewood’s electric driveway gates were installed during the city’s 1990s and early 2000s buildout. Those operators are now 20 to 30 years old and failing in a cluster, so actuator and control board replacement is one of the most common calls we take across the city. We diagnose the operator, wiring, safety sensors, and keypad in one visit and quote the repair in writing before we touch anything. Electric Gate Repair in Edgewood has the full breakdown.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Edgewood
We carry parts and service experience for the operators most common on Edgewood properties: Viking, Ghost Controls, DoorKing, and Elite, among others. When a control board or actuator is in stock, we can often complete the swap in a single visit. See our brands for the full list we work on.
Pricing for Gate Company in Edgewood, WA
| Service | Typical range in Edgewood |
|---|---|
| Service call and on-site diagnosis | $95-$165 |
| Hinge replacement on a standard swing gate | $180-$340 |
| Wood post reset (post heave or rot at ground line) | $260-$480 |
| Gate leaf re-hang and alignment | $220-$510 |
| Weld repair on a steel gate crack | $150-$380 |
| Swing gate actuator swap (parts and labor) | $650-$1,150 |
| Control board replacement | $320-$620 |
| Keypad replacement and reprogramming | $180-$300 |
| Full operator replacement (motor, arms, controls) | $1,100-$1,900 |
What pushes a price higher in Edgewood is usually the gate itself: a heavier leaf, an oversized post that needs deeper resetting, or an operator that’s been fighting moisture for twenty years. Whatever the number, you get it in writing before the work begins. No after-the-fact surprises.
Neighborhoods We Serve in Edgewood
We run crews across Edgewood’s acreage parcels and equestrian properties, from the long driveways off Meridian to the hobby-farm lots near the Puyallup River valley floor. Our standard response for a scheduled repair in Edgewood is a two-hour arrival window, often sooner for a gate that won’t close and secure.
- Meridian Avenue corridor
- Jovita area
- North Hill
- Edgewood plateau acreage parcels
- Puyallup River bench properties
Service Area – Cities Near Edgewood
While this page focuses on Edgewood, our crews also cover the surrounding region. If you’re on the other side of the county line or closer to the city centers, see our pages for Tacoma, WA, Seattle, WA, Spokane, WA, or Vancouver, WA.
Serving Edgewood, WA - Our Local Coverage Area
We’re based in the Edgewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Edgewood
For a scheduled repair, we commit to a two-hour arrival window and show up in it. If a gate is stuck open or won’t secure, we treat it as an emergency and prioritize the call. A live person answers the phone around the clock, so you’ll always reach someone who can tell you what’s realistic for the same day.
Most repairs and direct replacements don’t require a permit, but new installations near a property line or a public right-of-way can. We’ll check the specific requirements for your parcel and flag anything that needs city approval before we quote the job, so there are no surprises mid-project.
Every repair carries the 365-Day Done Right Promise. It’s written on the invoice: if the fix fails inside 365 days, we come back and correct it at no charge. No call-back fees, no “that’s a new problem” runaround. It’s the same Kingswell Guarantee on every Edgewood job.
If your gate is sagging, stuck, or refusing to open, call (940) 412-7340. You’ll get a real person, a real arrival window, and a written price before work begins. That’s how we do it in Edgewood.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Edgewood Customers Say
"Installed a new gate for us after the old wooden one rotted out. Clean work, showed up on time both days, and the written price didn't change. It swings perfectly."
- Donna Kirkpatrick"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti