Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Haltom City
Electric gate repair in Haltom City usually means one of two things: a residential swing gate that’s sagged off its hinges because Blackland Prairie clay shifted the post again, or a commercial slide gate on the Denton Highway strip that’s been chewed up by daily truck traffic. Most repairs run $180 to $340 for common fixes like limit switches, remotes, or safety sensors. A full operator swap on a residential gate runs $900 to $2,200, and commercial slide gate work on the US-377 corridor starts around $1,400 because of the heavier hardware. Our techs carry parts for LiftMaster, Viking, Ghost Controls, and DoorKing on the truck, and we answer the phone around the clock at (940) 412-7340.
You’re not just fixing a gate. You’re fixing the thing that keeps your kids in the yard, your tools out of sight, and your livestock where they belong. That’s the job, and we’ve been doing it since 2008 as an independently owned Kingswell company.
Why Portcullis Gate Repair Is Haltom City’s Preferred Electric Gate Repair Company
Haltom City’s gates are older than most. The ranch homes off Belknap Street and Denton Highway were built between the late 1940s and early 1970s, and a lot of them still run the original swing gate hardware. That means the tech who shows up has to know what a seized iron hinge from 1958 looks like, and how to get it unseized without snapping the post. Our crews have worked Haltom City’s residential streets long enough to know the difference between a gate that needs a simple limit adjustment and one that needs the post re-set in concrete because the clay finally won.
Every repair carries the 365-Day Done Right Promise. If the fix fails inside a year, we come back and make it right at no charge. That’s not a courtesy. It’s written on the invoice, stamped by Kingswell, and backed by a live person who answers the phone 24 hours a day, seven days a week. When you call our Haltom City electric gate repair line, you get a uniformed, background-checked technician with a written price in hand before a single bolt comes off.
Gate Access Control in Haltom City
Gate Access Control in Haltom City means more than a keypad on a post. It’s the full system that decides who opens your gate and when: keypads, remotes, push-button stations, telephone entry, and the control board that ties them together. On acreage east of Denton Highway where driveways run long and the nearest neighbor is a quarter mile away, we install and repair access systems built for range and durability, not just curb appeal. A keypad repair or remote reprogramming in Haltom City typically runs $95 to $185. If you need a full telephone entry system on a commercial gate near US-377, expect $1,800 to $3,400 installed, and we’ll have the price written down before we start.
Residential keypad and remote repair
Most Haltom City homeowners call us because the keypad stopped opening the gate, or the remote works from the driver’s seat but not from the street. Sometimes it’s a dead battery, which we’ll tell you straight and charge you the trip fee. More often it’s a 20-year-old keypad with sun-brittle buttons and corroded contacts. We swap heads, re-code remotes, and match the new hardware to your existing operator so you aren’t forced into a full system replacement.
Commercial access systems on the Denton Highway corridor
Salvage yards and used-car lots off US-377 run access systems hard. Forklift drivers punch in the code forty times a day. Semi trucks idle at the entrance while the slide gate cycles. We service industrial keypads, loop detectors, and guard shack controls on that strip, and we quote track cleaning and wheel replacement as routine because on Denton Highway it is routine. Gravel and metal shavings destroy rolling hardware fast, and we’d rather tell you that before the gate locks shut on a Monday morning.
Commercial Gate Operator in Haltom City
Commercial Gate Operator repair in Haltom City is heavy work, and it’s different from residential gate repair in every way that matters. These are slide gates and rolling gates that cycle hundreds of times a day at salvage yards and light industrial lots, not swing gates that open twice a week for the family car. We service and replace openers from Linear, Viking, Ghost Controls, and DoorKing, and we stock commercial-duty parts locally so a down gate on Belknap Street doesn’t sit dead for two weeks. A commercial operator replacement in Haltom City typically runs $1,400 to $3,800 depending on gate type and span, and we include the track inspection, safety edge, and loop detector check in the written quote.
High-cycle slide gate operators for salvage and scrap yards
This is the work Haltom City is known for. The Denton Highway stretch is one of the densest commercial gate corridors in Tarrant County, and the openers on those gates see duty cycles most residential operators never approach in fifteen years. We install and repair high-cycle slide gate operators rated for constant use, and we set the limits and torque so the gate doesn’t sling itself off the rail at the first missed loop. If the operator is older than the truck it’s opening, we’ll tell you what a replacement costs before we touch anything.
Wide-span farm gate operators on acreage
Some of the biggest gates we service in Haltom City aren’t on commercial property at all. They’re wide farm entrance gates off rural driveway cuts where a standard residential arm simply can’t push the span. We fit heavy-duty operators with enough torque for a 20-foot tube gate, and where mains power can’t reach, we pair the operator with a solar gate opener and battery bank sized for the load. The quote always includes the full power calculation.
Trusted Brands We Service in Haltom City
Portcullis Gate Repair trains on nine major gate-operator brands, and around Haltom City we see a lot of LiftMaster on residential swing gates, Viking and Linear on commercial slides, and Ghost Controls and DoorKing on the acreage entrances beyond city limits. We carry parts locally for those systems so we aren’t waiting on a distributor in Dallas when your gate is stuck open after dark. If we don’t have the specific board or gear in the truck, we can usually have it the next morning. We’ll tell you the timeline up front, in writing, with the price.
Common Electric Gate Repair Problems We See in Haltom City Homes
- Hinge posts heaved out of plumb by Blackland Prairie clay. Haltom City sits on expansive clay that swells after spring rain and shrinks in the summer dry. A gate that was level in April can be dragging on the concrete by July. We re-set posts with proper concrete depth and expansion control, or we refit hinges to get the swing gate closing square again.
- Solar battery banks that fade under Texas heat. On long driveways where running mains power isn’t practical, the solar gate opener carries the whole load. Haltom City summers cook lead-acid and even lithium batteries faster than people expect, and we replace the battery bank before the gate quits in the worst weather of the year.
- Slide gate track wheels ground down by debris. The commercial strip along Denton Highway produces a steady rain of metal shavings, gravel, and forklift dirt. Track wheels and rollers on those gates wear out in months, not years. We inspect and replace them as a standard line item on any commercial call in that corridor.
- Control boards fried by power surges or corroded by humidity. Tarrant County gets proper electrical storms, and Haltom City gates are no exception. A lightning strike nearby can take out a control board even with a surge protector. We diagnose the board before we condemn it, and we’ll show you the old one when we hand you the new one’s paperwork.
Pricing for Electric Gate Repair in Haltom City, TX
A service call to Haltom City for electric gate repair runs $65 to $95, and that call fee is waived when you approve the repair. From there: keypad replacement $150 to $285, safety sensor repair $120 to $240, limit switch adjustment $90 to $160, residential operator swap $900 to $2,200, and commercial slide gate operator replacement $1,400 to $3,800. A solar gate opener retrofit on an acreage driveway with a new battery bank typically lands between $2,200 and $4,500 depending on gate weight and span. Every one of those numbers comes in writing before we start. Call (940) 412-7340 and we’ll quote it straight.
We do not quote low and bill high. The Kingswell Guarantee says the price we write down is the price you pay, and that written guarantee covers the repair for 365 days. If it fails, the return visit is free.
We Also Serve Cities Near Haltom City
Our Electric Gate Repair crews cover Haltom City and the surrounding area, including Fort Worth, North Richland Hills, Hurst, and Bedford. If your gate is down and you’re just outside the Haltom City line, call us anyway. We’ll tell you straight if we can get to you today, and we’ll give you a real arrival window, not a four-hour shrug. Learn more about our work here at Electric Gate Repair in Haltom City.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Haltom City
Because those are commercial slide and rolling gates that cycle hundreds of times a day under forklift and semi-truck traffic. The track wheels pick up metal shavings, gravel, and debris that grind the rolling hardware down in months instead of years. It’s normal wear for that kind of gate, and any repair on the Denton Highway corridor should include track inspection and wheel replacement in the quote. Call (940) 412-7340 and we’ll walk you through what your specific gate needs.
Yes. Solar gate openers with a properly sized battery bank can run a wide farm gate or long driveway entrance reliably, and we install and service them throughout Haltom City’s acreage edges. The key is sizing the panel and battery bank to the actual gate load and the Texas summer heat, because batteries degrade faster here than they do in cooler climates. We’ll spec the system and put the whole thing in writing.
Most often in Haltom City it’s the Blackland Prairie clay under the hinge post. The soil swells in spring rains and shrinks in summer drought, which heaves the post out of plumb and throws the gate panel out of square. If a repair just greases the hinge and adjusts the limit, the sag comes back within a season. We re-set the post in properly deep concrete and re-hang the panel, which is the only fix that lasts here. Reach us at (940) 412-7340 to get it done right.
Yes. Automatic gates in Texas must meet UL 325 safety standards, which means entrapment protection like a reversing edge or photocell sensor is required, not optional. A gate that closes on a car or a person is a liability you don’t want, and we check every safety device on every service call. If yours is missing or bypassed, we’ll tell you and quote the fix in writing before any work happens. Estimates are free.
We do. Our technicians are trained on LiftMaster, Viking, Linear, Ghost Controls, and DoorKing, among others, and we service both residential swing gates and heavy-duty commercial slide and rolling gates across Haltom City. Whether it’s a ranch home swing gate off Diamond Oaks or a salvage yard slide gate on Denton Highway, we show up with the right parts and a written price. Call (940) 412-7340 for a free estimate.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Haltom City since 2008.