Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Fontana, CA
Gate work in Fontana is shaped by two forces most cities never deal with: the Cajon Pass wind corridor and a housing stock that’s aging all at once. Most of the city’s residential gates were installed in the 1990s and 2000s with the tract homes themselves, which means scores of wrought-iron driveway gates are hitting the same hinge, post-anchor, and operator failures around the same time. We’re a 24/7 gate company serving Fontana with written pricing before any work starts, and our techs know exactly what the wind does to a gate up here. Call (940) 412-7340 and you’ll get a live person, not a voicemail tree.
Why Fontana Homes Are Different
Fontana sits at the base of the Cajon Pass, and the gusts that funnel through this corridor don’t just rattle gates – they rack frames off their posts, strip hinge welds, and burn out automatic operators at rates measurably higher than in Ontario or Chino just a few miles south. A gate that would last 15 years in Rancho Cucamonga can fail in six here if the post anchors weren’t sized for sustained wind load. That’s why our Fontana crews refuse to reuse undersized footings or bolt new operators onto posts that are already leaning. The north and east sides of town are dominated by 1990s and 2000s stucco master-planned communities, where ornamental iron driveway and side-yard gates are now 20 to 30 years old and cycling through simultaneous hinge, post-anchor, and opener failures. Older blocks near downtown and along Sierra Avenue include mid-century homes from the 1950s and 60s, where gate posts were often set in concrete that has cracked and spalled below grade. Summer temps over 105°F make metal frames expand enough to bind rollers and throw automatic-opener limit switches out of calibration – another reason a gate that works in March can jam by August. And Fontana’s warehouse belt along the I-10 and I-15 corridors creates a different kind of work entirely: industrial slide gates, crash-rated barriers, and vehicle-loop detectors that take a beating from truck traffic every single day.
Our Main Fontana Services
Fontana homeowners call us most for two things: repairing gates that have failed under wind or age, and installing new gates that are built for this city’s specific conditions. Each service has its own Fontana page with full pricing and details.
Gate Repair in Fontana
Most Fontana repair calls start with a gate that won’t open, a hinge that’s pulled away from the post, or a frame that’s warped from wind load. We start by diagnosing the actual failure – the post anchors, the hinge welds, the operator – and then hand you a written price before a single bolt is turned. If the repair fails inside 365 days, we come back free under the Done Right Promise. Read the full scope on our Gate Repair in Fontana page.
Gate Installation in Fontana
New gate installation in Fontana means more than hanging a panel. We check the existing footings, size the post anchors for Cajon Pass wind, and mount the operator to handle the heat and the gusts. HOA rules vary by community in Fontana, and we’ll work with your association’s standards from the first quote to the final inspection. See what a full installation includes on our Gate Installation in Fontana page.
Electric Gate Repair in Fontana
Automatic gate operators in Fontana fail at a higher rate than almost anywhere in the Inland Empire – the pass-effect winds push gates past their limit settings, and the summer heat throws sensors out of calibration. Our electric gate repair covers the operator, the safety edges, the loop detectors, and the remote receivers, all with the same written guarantee. Details and pricing live on our Electric Gate Repair in Fontana page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Fontana
We arrive in Fontana with parts for Linear, Viking, Gatecrafters, Ghost Controls, and DoorKing systems on the truck – so most repairs are done in one visit, not two. We also handle FAAC, BFT, HySecurity, LiftMaster, and Phantom. See our brands page for the full list.
Pricing for Gate Company in Fontana, CA
| Service | Typical range in Fontana |
|---|---|
| Hinge replacement (standard wrought-iron pair) | $180 – $350 |
| Gate readjust / realign | $120 – $250 |
| Post anchor repair | $220 – $450 |
| Frame straightening | $200 – $400 |
| Operator replacement (single swing arm) | $750 – $1,300 |
| Operator replacement (sliding gate) | $900 – $1,800 |
| Safety sensor / photo-eye repair | $150 – $300 |
| Loop detector replacement | $250 – $550 |
| Keypad / remote programming | $75 – $200 |
Wind damage pushes Fontana prices toward the high end when a post
anchor has to be re-poured or a frame has to be re-squared – and we’ll tell you exactly where your job falls before you approve anything. The price you’re quoted is the price you pay; that’s the Kingswell Guarantee, and it’s written on every invoice.
Neighborhoods We Serve in Fontana
We cover all of Fontana, from the master-planned communities in the north and east to the older blocks near downtown and the commercial corridors along Jurupa Avenue and the I-10. Our typical response for most Fontana jobs is same-day or next-day, with emergency service available whenever you need it.
- Rancho Fontana
- Sierra Lakes
- Northgate
- Walnut Village
- West End
Service Area – Cities Near Fontana
Our Fontana crews also cover the surrounding communities. We service Bloomington, CA, Rialto, CA, Rancho Cucamonga, CA, and Riverside, CA with the same written pricing and 365-day guarantee on every job.
Serving Fontana, CA - Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fontana
Most Fontana repair calls get a same-day or next-day visit. Emergency calls are answered by a live person 24/7, and we’ll give you a real arrival window before the truck leaves our shop. Call (940) 412-7340 and we’ll tell you exactly when we can be there.
Most residential gate repairs and replacements in Fontana don’t require a city permit, but some HOAs in the master-planned communities have their own standards for gate height and design. We’ll check your community’s rules before we quote, and we’ll put everything in writing so there are no surprises.
Yes. We service industrial slide gates, crash-rated barriers, and vehicle-loop detectors along the Jurupa Avenue warehouse belt and the I-10/I-15 corridors. Commercial work gets the same written price and 365-day guarantee. Call (940) 412-7340 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fontana Customers Say
"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti"Good repair on a sagging gate and a new hinge welded on. Took them a couple days to get the part in, but they told me that up front and it's been solid since."
- Hector Villanueva