Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Fulshear, TX
Gate repair in Fulshear usually means one of two things: a swing gate that’s dropped out of alignment because the Beaumont clay under the posts shifted, or an electric operator that’s failing early from humidity and flood-related corrosion. We’re Portcullis Gate Repair, an independently owned Kingswell company, and we work on both every week. Most Fulshear jobs are on newer luxury homes in master-planned communities like Cross Creek Ranch and Bonterra, where automated driveway gates are standard. Call (940) 412-7340 and you’ll get a live person, a real arrival window, and a written price before any work starts.
Why Fulshear Homes Are Different
Fulshear’s housing stock is overwhelmingly new construction, most of it built since 2010 on large lots priced well above the Houston-metro average. That changes the repair profile. We don’t see many rusted-through gates or worn-out hinges from the 1980s here. What we see instead is what happens when a heavy ornamental iron or aluminum gate is mounted on posts set into Fort Bend County’s expansive Beaumont clay.
Beaumont clay doesn’t just get wet. It swells and shrinks dramatically through wet and dry seasons, and when it does, gate posts move. A post that shifts half an inch can leave a swing gate dragging on the driveway or a slide gate catching on its track. In Fulshear, post-resetting and operator realignment are the defining recurring repair calls, far more than in nearby cities with different soils. It’s the single most common reason a Fulshear gate stops working.
There’s also the flood factor. Fulshear sits in the Brazos River floodplain, and lower-lying properties took on water during Hurricane Harvey in 2017 and later flood events. Gate motors and control boards that were submerged and dried out can develop latent corrosion that shows up years later as intermittent failures: the gate works fine one morning, won’t budge that afternoon, works again the next day. Add Fulshear’s humidity, which accelerates oxidation on hinge pins, rollers, and welds even on gates that never flooded, and you have a repair market that’s genuinely different from older, dryer Houston suburbs.
Our Main Fulshear Services
Most Fulshear homeowners call us for one of three things: a gate that won’t open or close properly, a full installation on a new build or replacement, or an electric operator that’s stopped responding. Each has its own page with specific pricing and detail.
Gate Repair in Fulshear
A misaligned gate in Fulshear usually traces back to post movement in the clay soil, not to the gate itself. Our Gate Repair in Fulshear work includes post-resetting, hinge and roller replacement, weld repair, and realignment of both swing and slide gates. Because most Fulshear gates were installed within the last ten to fifteen years, the hardware is often still sound, which means the fix is usually about correcting what the soil did rather than replacing worn parts. We quote the repair in writing before we turn a single bolt.
Gate Installation in Fulshear
New construction in Fulshear means many homes are getting a gate for the first time, or replacing a builder-grade unit that never quite worked right. Our Gate Installation in Fulshear service covers ornamental iron and aluminum driveway gates sized for the wide lots common in Cross Creek Ranch and similar communities. If you’re in an HOA with architectural guidelines, we pull the requirements before ordering materials so the gate matches approved heights, finishes, and styles. It saves the violation letter and the re-inspection fee.
Electric Gate Repair in Fulshear
Humidity and flood history make electric gate failures in Fulshear more common than in drier parts of the metro. Our Electric Gate Repair in Fulshear work covers operator replacement, control board diagnosis, safety sensor repair, and wiring fixes on systems from FAAC, BFT, Linear, Viking, and other major brands. An operator that works intermittently often has moisture inside the housing or corrosion on the board from a past flood event. We diagnose that specifically rather than throwing parts at the problem.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Fulshear
We carry parts and service experience for the operators most common on Fulshear’s new-construction gates, including FAAC, BFT, Linear, and Viking. Many common parts are stocked in our Houston warehouse and arrive on the truck with the technician, which keeps most repairs to a single visit. See our brands for the full list of nine operator lines we service.
Pricing for Gate Company in Fulshear, TX
| Service | Typical range in Fulshear |
|---|---|
| Swing gate post-resetting (Beaumont clay shift) | $350-$700 |
| Slide gate track realignment | $250-$500 |
| Swing gate actuator (operator arm) replacement | $800-$1,500 |
| Slide gate operator replacement | $900-$1,800 |
| Control board replacement | $400-$800 |
| Safety sensor (photo eye) replacement | $150-$350 |
| Hinge replacement (pair, ornamental iron) | $200-$450 |
| Weld repair, per point | $120-$250 |
| Full ornamental iron driveway gate installation | $3,500-$8,000 |
| Full aluminum driveway gate installation | $3,000-$6,500 |
| Electric operator installation (new automation) | $1,200-$2,800 |
What pushes the price up in Fulshear is usually the post work. If the clay has moved a post more than a couple of inches, resetting it means digging it out, re-setting it in new concrete, and letting it cure before the gate goes back on. That’s labor and materials, and it’s the right fix rather than shimming the gate to compensate. Every quote is written down before we start, and the price we hand you is the price you pay. If the repair fails within 365 days, we come back and fix it at no charge under the 365-Day Done Right Promise.
Neighborhoods We Serve in Fulshear
We cover all of Fulshear, with most calls coming from the master-planned communities on the west side of the city. Our typical response for non-emergency work is same-day or next-morning, and emergency gate securing is handled around the clock.
- Cross Creek Ranch
- Fulshear Lakes
- Bonterra
- Weston Lakes
- Fulshear Run
Service Area – Cities Near Fulshear
In addition to Fulshear, we serve the surrounding Fort Bend County communities. If you’re in Richmond, TX, Katy, TX, Rosenberg, TX, or Sugar Land, TX, the same written pricing and 365-Day Done Right Promise apply. Dispatch and scheduling are coordinated from our Houston office, and crews serve Fulshear locally.
Serving Fulshear, TX - Our Local Coverage Area
We’re based in the Fulshear area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fulshear
For a gate stuck open or one that won’t secure, we treat it as an emergency and typically arrive the same day, often within a few hours. A gate that won’t close is a security issue on a Fulshear property, and we prioritize it. Call (940) 412-7340 and tell us what’s happening.
In communities like Cross Creek Ranch, repairs that match existing materials, colors, and styles usually do not need committee review. It’s when you change a finish, swap a material, or alter gate height that an architectural application may be required. We check the community’s guidelines before ordering parts when the repair changes appearance.
Yes. Every Fulshear job gets a written price before any work begins, and we don’t add after-the-fact charges. If the repair fails within 365 days, our 365-Day Done Right Promise means we return and correct it at no charge. Call (940) 412-7340 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fulshear Customers Say
"Gate wouldn't respond to the remote or the keypad. Turned out to be the control board. They had the part and swapped it the same visit. Quoted it first, no surprises."
- Everett Shaw"Electric gate kept doing its own thing, opening at random. The tech found a shorted sensor and a worn board, fixed both, and showed me the old parts. Price was what he quoted on the phone."
- Cassandra Pike"Installed a new gate for us after the old wooden one rotted out. Clean work, showed up on time both days, and the written price didn't change. It swings perfectly."
- Donna Kirkpatrick