Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Aubrey
If you’re searching for gate installation in Aubrey, you need a company that understands the two distinct generations of gated properties here. New subdivision entrance monuments and swing gates on post-2015 tract homes need one set of skills. The older 1990s-era ranches and horse properties on the acreage roads need something different. Portcullis Gate Repair has served both since 2008. We answer the phone around the clock at (940) 412-7340, and we arrive in a real window, not a four-hour guess.
What most Aubrey homeowners discover is that their gate wasn’t necessarily installed wrong. It was installed for a different era, a different soil condition, or a different duty cycle than their property actually demands. We address that honestly, with a written price before we turn a single bolt.
Why Portcullis Gate Repair Is Aubrey’s Preferred Gate Installation Company
Aubrey sits at a sharp exurban edge where brand-new master-planned subdivisions like Sandbrock Ranch abut legacy acreage and equestrian properties. That creates a gate market uniquely split between high-volume automated slide gates on long rural driveways and ornamental community entry monuments. Most gate companies serving DFW metro understand one type or the other. We understand both, because we’ve worked both sides of FM 428 and U.S. 377 for years.
Our technicians who run Aubrey calls know what a Blackland Prairie clay heave does to a gate post. They know that a solar-charged Viking operator on a cloudy January week will mimic a dead motor. They know which subdivisions use builder-grade swing gates that wear hinge bushings before the operator ever fails. That local knowledge changes the diagnosis, and the diagnosis changes the price.
Every Portcullis location is independently owned and operated, but held to the identical written standard: the Gate Installation work we do anywhere is work we’d put on our own fence line. We’re a Kingswell company. That means a written price before any work starts, a real arrival window, a clean job site, and a written 365-Day Done Right Promise on every job.
Gate Opener Installation in Aubrey
Gate opener installation in Aubrey generally means one of two jobs: replacing a worn actuator (the motorized arm that physically pushes the gate open) on a swing gate, or replacing a slide operator on a long caliche driveway. The rural residential properties off Fishtrap Road and FM 2931 frequently have long gravel or caliche driveways with solar-powered or hardwired automatic gates that age out of alignment from years of heavy daily cycles. A typical swing actuator swap here runs $950-$1,650 parts and labor, while a slide operator replacement on a 20-foot gate often lands between $1,400 and $2,300 depending on the operator class and whether we’re reusing the existing rack.
We quote the opener, the safety photocells, and the labor separately. You see the number before we start. If the old panel is obsolete (common on 1990s-era units northeast of town), we’ll tell you honestly whether retrofitting is worth it or whether a new opener is the cheaper long-term answer.
Retrofitting Older Gates
Most 1990s and early-2000s gates around Aubrey don’t need to be torn out. They need the right opener matched to the gate’s weight and a proper footing under the post. We routinely mount modern LiftMaster swing arms to older pipe-and-tube ranch gates, and we install current FAAC and BFT slide operators where a Linear unit has finally given out.
New Opener, Existing Gate
If your gate panel is straight, your hinges are tight, and your posts are still set, a new opener is the right call. We fit the operator to the gate, not the other way around, and we confirm the safety photocell spacing before we leave.
Gate Fabrication in Aubrey
Gate fabrication in Aubrey is what you need when a new opener won’t fix a sagging panel, a snapped hinge, or a post that’s been heaving in Denton County clay for a decade. We build custom driveway gates, pedestrian gates, and double swing gates to the actual measurements of your opening, not a “close enough” factory size. Most single drive gates in Aubrey run $1,800-$3,900 fabricated and installed, depending on whether you choose ornamental steel, ranch pipe-and-tube, or aluminum. Double swing gates typically land between $3,200 and $6,800 because of the extra steel, dual hinges, and often a second actuator.
We build for the soil we’re putting the post into, not the soil a catalog assumes you have. Blackland Prairie clay moves. Our footings account for that, with deeper sets and concrete pads sized for the frost line and the wet-dry cycle.
Replacing a Pushed Post Gate
When a gate has dragged its hinge post loose after years of clay movement, the panel sometimes survives while the footing fails. We reset the post, correct the panel sag, and often reuse the existing gate if it’s structurally sound.
Fabricating to Match the Property
Sandbrock Ranch homes and older acreage estates don’t want the same gate. We match the style, the metal finish, and the operator to the property, then quote it in writing.
Trusted Brands We Service in Aubrey
We service and install gate operators from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Aubrey customers, that brand coverage matters in a specific way: the older Viking and Linear solar setups still running on acreage roads northeast of town need technicians who still understand their wiring and their solar charge controllers. We do. We maintain stock on common FAAC and BFT control boards and photocells locally, which gets most Aubrey operator jobs completed in a single visit instead of waiting on a parts shipment.
Common Gate Installation Problems We See in Aubrey Homes
- Clay heave on posts and operator pads. Denton County’s expansive Blackland Prairie clay shifts dramatically with seasonal wet-dry cycles, causing gate posts and buried operator pads to heave and tilt. That’s a primary driver of misaligned automatic gate systems that won’t fully open or close.
- January dead batteries on solar setups. On the older acreage roads northeast of town, many properties still run 1990s-era Viking or Linear gate operators on solar trickle-charge setups. Prolonged cloudy winters and high daily use run batteries dead by January every year, a predictable seasonal call we can almost schedule in advance.
- Ice-storm damage from February 2021. North Texas ice storms seized motors, cracked plastic gear housings, and snapped hinges across Aubrey in a single week. We still find freeze-damaged swing gates sagging at the hinge post, sometimes weeks or months after the event, when the damage finally shows.
- Builder-grade gates outgrowing their duty cycle. Newer Sandbrock Ranch and Master-planned tract homes often come with an automatic gate sized to the minimum. After a few years of daily cycles, the hinge bushings wear, the photocells drift, and the gate starts beeping or reversing. It isn’t always the operator; it’s often the hardware around it.
Pricing for Gate Installation in Aubrey, TX
Here are honest ranges for Aubrey. A single swing-gate actuator swap runs $950-$1,650 parts and labor. A slide operator replacement on a long driveway typically lands $1,400-$2,300. Custom fabricated single driveway gates run $1,800-$3,900 installed; double swing gates $3,200-$6,800. Gate opener installation with new safety photocells and a control board refresh adds $300-$700 on most property types. What moves the number: gate length, operator class, whether we’re reusing the existing rack or chain, and how much post repair the clay has already made necessary.
Every quote is written and agreed before work begins. You’ll never get a larger invoice at the door. Call (940) 412-7340 for a free estimate.
We Also Serve Cities Near Aubrey
Our Gate Installation in Aubrey team also runs calls to Frisco, Little Elm, Denton, and Prosper. If you’re on a property line that straddles two towns, don’t worry about the zip code; if the gate is in Aubrey, we treat it as an Aubrey job and quote it accordingly.
Serving Aubrey, TX - Our Local Coverage Area
We’re based in the Aubrey area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Aubrey
Most of the time, it’s the battery. The older Viking and Linear solar setups on the acreage roads northeast of town run their batteries down to nothing by January after a few weeks of cloudy trickle-charge. We test the battery under load before quoting any operator replacement; if it’s just the battery, the fix is a fraction of the cost. Call (940) 412-7340 and we’ll check it for free.
You can almost always retrofit a modern opener to a 1990s-era gate, as long as the panel is structurally sound and the hinges aren’t worn out. We mount current LiftMaster, FAAC, and BFT operators to older ranch gates regularly around Aubrey. A whole new gate is only necessary when the post footing has failed or the panel has stress cracks from years of sag.
Yes, and that’s a large share of our Aubrey work. Long gravel and caliche driveways off Fishtrap Road and FM 2931 often use slide gates instead of swing gates, because the driveway width and the slope work better with a rolling gate. The key on those sites is a deeper post setting for the clay movement, and we build the operator pad to account for wet-dry heave.
Yes. Automatic gates on community entries in Aubrey, including Sandbrock Ranch entry monuments, are required to have functioning safety photocells (photo-eyes) that reverse the gate if a vehicle or pedestrian is in the path. We test those on every installation, and we won’t sign off on a gate that doesn’t meet current safety standards.
Look at the hinge side of the gate. If the post is leaning or the panel has dropped enough that the latch no longer lines up, the hinge post or its footing is the problem, not the operator. A new operator on a sagging gate will work for a few months and then fail because the motor is fighting the misalignment. We inspect the post, the footing, and the panel before we recommend any opener work. Call (940) 412-7340 and we’ll give you a straight answer.
Call Portcullis Gate Repair for Gate Installation in Aubrey
Between Sandbrock Ranch’s new tract gates and the 1990s-era Viking and Linear solar operators on the acreage roads northeast of town, Aubrey has two gate generations running at once. Most “dead” rural operators in January are just batteries on cloudy-day trickle charge, not failed control boards. We know the difference, and we’ll tell you honestly before we write the quote. Call (940) 412-7340 for a free estimate on gate installation, gate fabrication, or opener replacement in Aubrey. Our team, led by Dean Prescott, answers around the clock.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Aubrey since 2008.