Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Beverly Hills
Gate installation in Beverly Hills runs $4,800 to $18,500 for a complete motorized driveway system, depending on whether you’re converting an obsolete hydraulic operator, welding a custom ornamental iron double gate, or starting fresh on a hillside lot north of Sunset. We coordinate every Beverly Hills job through our Los Angeles office, with crews dispatched locally so you’re not waiting on a crew fighting cross-town traffic. A live person answers our phone at (940) 412-7340 around the clock, and you’ll get a written price before a single bolt is turned. Dean Prescott runs our Beverly Hills gate installation crew, and he’s the one who walks your property, measures the setback, checks the right-of-way clearance, and tells you exactly what the city inspector will want to see.
Why Portcullis Gate Repair Is Beverly Hills’s Preferred Gate Installation Company
We’ve rebuilt enough gates in Beverly Hills to know that the flats south of Santa Monica Blvd and the canyons north of Sunset are two completely different jobs. The flats are heavy ornamental iron double-swing gates on long setback driveways. The hills are steep grades, tight switchbacks, and post footings that fight you every inch. Our Gate Installation team carries the permit paperwork, the right-away measurements, and the welded-steel experience to handle both. Portcullis Gate Repair has been a Kingswell company since 2008, and every job carries the same four promises: a written price before any work starts, a real arrival window, a clean job site, and a written guarantee on the repair.
Homeowners here have been burned before. A tech who never showed. A quote that doubled at the door. A gate that failed six weeks later. That’s why we put the 365-Day Done Right Promise on every invoice. If the repair fails inside a year, we come back and fix it at no charge. No arguing, no fine print. It’s written on the paper you keep.
We don’t run voicemail trees. A live person answers at (940) 412-7340, including holidays. When the Santa Anas hit and your gate is swinging off its hinges, you don’t want a callback queue.
Driveway Gate Installation in Beverly Hills
Driveway Gate Installation in Beverly Hills almost always means one of two scenarios. Either you’re replacing an operator (the motorized arm or slide mechanism that opens the gate) on a 1990s estate gate that’s still structurally sound, or you’re replacing the entire gate and drivetrain because the original hydraulic unit is obsolete and the ornamental iron has taken decades of UV and wind abuse. A basic operator conversion on a flat-lot single swing gate starts around $4,800. A full custom double-swing replacement with new posts, a modern operator, safety photocells, and intercom wiring runs $9,500 to $18,500 depending on the ironwork.
What most homeowners don’t realize until the gate sags: the hinge post is the foundation of the whole system. In Beverly Hills, posts set in the 1980s and 1990s often sit in unreinforced footings that have settled or heaved. If the post moves, the gate drags, the operator burns out, and you’re throwing good money after bad. We check the post before we touch the operator.
Permit and Right-of-Way Clearance
Beverly Hills operates its own building department, separate from LA County. Any gate automation upgrade or hinge-post replacement requires a city permit and an inspection pass before it’s signed off. We handle the permit application, schedule the inspection, and make sure the gate’s swing path doesn’t violate the city’s right-of-way clearance rules. That matters on tight hillside lots where a gate that swings outward over the sidewalk will fail inspection.
Ornamental Iron Matching
Most of the estate gates in the flats were custom-fabricated as one-off pieces. No matching pickets, finials, or rail sections exist. When a Santa Ana gust slams a leaf against its stop and bends a picket, we hand-forge a replacement on site to match the original fabrication. Most gate companies won’t do that. We do it because in Beverly Hills, a mismatched picket devalues the entire entrance.
Sliding Gate Installation in Beverly Hills
Sliding Gate Installation in Beverly Hills is usually the answer on properties where the driveway is too steep or too short for a swing gate to arc safely. North of Sunset, on those mid-century modern lots carved into the hillside, a sliding gate rides on a track or a cantilever rail and never swings into the street. That’s often the only gate geometry that gets past Beverly Hills code when the driveway meets the road at a steep angle.
A cantilever sliding gate installation in Beverly Hills typically runs $6,500 to $14,000. Rack and pinion slide operators from DoorKing or Linear are common here because they handle the weight of solid steel infill panels better than hydraulic swing actuators. The job includes the steel V-track or cantilever rail, the operator, loop detectors in the driveway, safety photocells, and the conduit run for low-voltage wiring.
We convert a lot of old 1980s and 1990s hydraulic swing setups to modern rack and pinion slide systems. The old FAAC units are obsolete, parts are scarce, and the hydraulic fluid leaks into the planter beds. Converting to slide geometry often solves two problems at once: the operator wears less, and the gate stops swinging into the wind.
Hillside Grade and Drainage
On a steep grade north of Sunset, drainage is everything. A sliding gate on a slope collects debris, and if the track bed isn’t graded properly, water pools and rusts the rail. We pour a reinforced concrete track bed with a drainage swale that moves water away from the gate travel path. Skip that step and you’ll be replacing the rail inside five years.
Converting from Swing to Slide
When the old double-swing iron gate can’t hold alignment on a settling hillside anymore, we convert to sliding geometry. The existing decorative iron panels can often stay; we reframe the gate, add the cantilever rail, and set new posts with deeper footings. The price depends on whether we’re keeping the existing ironwork or fabricating new panels, but the range stays between $7,000 and $16,000.
Trusted Brands We Service in Beverly Hills
Our technicians are certified on DoorKing, Linear, and Viking operator systems, three of the brands we see most often on Beverly Hills estate gates. DoorKing slide operators are workhorses on long runs in the flats. Linear swing and slide actuators handle the heavy ornamental iron common in the 90210 zip code better than most budget brands. Viking makes a solid residential swing actuator for smaller pedestrian gates off the main drive. We stock common parts for these systems locally, which means a Santa Ana storm repair on a Thursday doesn’t wait until Tuesday for a part to ship.
Common Gate Installation Problems We See in Beverly Hills Homes
- Santa Ana wind slam. Solid-infill double-swing gates catch wind like sails. A 60 mph gust slams the leaf against its stop, bends the hinge, and spikes torque beyond what the operator’s clutch can absorb. When the counterbalance has drifted over years of settling, the damage compounds: the operator wears out faster, the hinges stretch, and the gate starts sagging into the driveway.
- Saturated hillside post footings. North of Sunset, post footings sit in soil that heaves when winter rain saturates the slope. The hinge post shifts, the gate drops, and the whole leaf starts dragging. Replacing the post means pulling the old footing, pouring a deeper concrete pier with rebar, and re-hanging the gate square.
- Obsolete hydraulic operators. FAAC, Linear, and early commercial LiftMaster hydraulic units from the 1980s and 1990s are reaching end of life across Beverly Hills. Seal kits are discontinued, pumps are unrepairable, and the replacement parts cost more than a full drivetrain conversion. We convert to modern rack and pinion slide operators or electromechanical swing actuators every month in this city.
- UV degradation of powder coating and seals. Beverly Hills sits far enough inland that the UV index stays high year-round. Powder-coated gate frames bleach to a chalky gray within a decade, and neoprene seals around safety edges crack and harden. Once the coating fails, rust starts at the welds and hinges. We sandblast and re-coat during installation so the new gate doesn’t age like the old one.
Pricing for Gate Installation in Beverly Hills, CA
A straight operator replacement on an existing flat-lot gate in Beverly Hills runs $2,800 to $5,500 parts and labor. Converting an obsolete hydraulic system to a modern slide or swing operator is $4,800 to $9,000. Full driveway gate installation, new iron or steel, new posts, operator, safety photocells, and wiring, runs $9,500 to $18,500. Hillside lots north of Sunset add $1,500 to $4,000 for deeper footings, drainage work, and steeper grade engineering. Every quote is written, itemized, and agreed before we start. If the repair fails inside the 365-day guarantee period, the return visit is free. Call (940) 412-7340 for a free estimate on your gate installation in Beverly Hills.
We Also Serve Cities Near Beverly Hills
While this page covers gate installation in Beverly Hills, our crews also handle jobs in West Hollywood, Culver City, Santa Monica, and Marina del Rey. The permitting rules differ in each city, but the Kingswell Guarantee doesn’t. If your property sits just outside Beverly Hills’s city limits, Beverly Hills is still our dispatch hub for the area, and the same written price guarantee applies.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Beverly Hills
Every motorized gate has a manual release mechanism, usually a keyed release on the operator or a T-handle pull near the drive. Turn the operator off at the breaker first, then disengage the release and move the gate by hand. If your gate is a heavy double-swing ornamental iron installation, two people should move it: those solid-infill leaves weigh hundreds of pounds, and a gust can turn a 400-pound gate into a dangerous pendulum. If you can’t locate the release or the gate won’t budge, call us at (940) 412-7340 and we’ll walk you through it or send a technician.
Yes. Beverly Hills operates its own building department, and any gate automation upgrade or structural modification, including hinge-post replacement, requires a city permit and inspection. We file the permit, schedule the inspection, and make sure the work passes on the first visit. The city’s right-of-way clearance rules are stricter than LA County’s, especially on corner lots and hillside drives where a swing gate could arc over the sidewalk.
Solid-infill gates catch wind across the entire face of the leaf. When a Santa Ana gust hits, the leaf accelerates until it hits the stop, and that impact bends hinges and spikes operator torque. If the gate’s counterbalance has drifted over years of settling, the operator’s clutch can’t absorb the load, and you get the same slam every fall. The fix is usually a combination of re-balancing the gate, reinforcing the hinge posts, and if wind load is too high, converting the gate to slide geometry so it never swings into the wind at all.
Yes. The ornamental iron gates on the Spanish Colonial Revival, Mediterranean, and Tudor Revival estates in the flats were mostly custom-fabricated as one-off pieces. No catalog part exists. We hand-forge replacement pickets, finials, and rail sections on site to match the original profile, then rust-treat and powder-coat the repair so it blends with the rest of the gate. This is work most gate companies won’t do because it requires a blacksmith’s skill, not just a parts catalog.
The first thing we do on a steep grade is check the post footings and the drainage. Hillside footings in Beverly Hills sit in soil that heaves when the winter rains saturate the slope, and a gate set on a shifting post will sag out of alignment within a season. We pour deeper reinforced concrete piers, grade the track bed with a drainage swale for slide gates, and on grades where a swing gate can’t clear the street without violating right-of-way clearance, we recommend converting to a cantilever sliding gate. Every hillside job includes a written engineering approach before we quote the full (940) 412-7340 price.
Contact Us
Call (940) 412-7340 today for a free, written estimate on your gate installation in Beverly Hills, CA. Dean Prescott and our Beverly Hills crew will measure the setback, check the right-of-way clearance, inspect the existing posts, and give you a price before any work starts. The 365-Day Done Right Promise is written on every invoice. If it’s not done right, we come back and fix it at no charge.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Beverly Hills since 2008.