Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Miami
A new automatic gate for a Miami property usually runs between $4,800 and $9,500 installed, depending on whether it’s a swing arm on a Coral Gables estate or a sliding panel on a tight Coconut Grove lot. We’re Portcullis Gate Repair, an independently owned Kingswell company, and we’ve been answering the phone around the clock for Miami homeowners since 2008. When you call (940) 412-7340, a live person picks up, we give you a written price before any work starts, and we arrive in the window we committed to. No phone trees, no callback queues, no technician who never shows.
Why Portcullis Gate Repair Is Miami’s Preferred Gate Installation Company
Miami gate work is different from gate work anywhere else in Florida, and the difference is salt. Biscayne Bay on one side, the Atlantic on the other, and tidal canals threading through Coconut Grove and the Coral Gables waterfront mean every piece of hardware on your gate is getting hit with salt air twelve months a year. Standard galvanized hinges seize solid within two summers out here. We spec 316 marine-grade stainless as the minimum on any coastal install, because anything less means we’re back in eighteen months replacing what we already replaced.
Homeowners in Miami have been burned before. A technician who never showed. A quote that doubled at the door. A repair that failed six weeks later and nobody answered the follow-up call. That’s why every Portcullis job includes the Kingswell Guarantee in writing: the price before the work, a real arrival window, a clean job site, and a written 365-Day Done Right Promise. If the install isn’t right, we come back and make it right at no charge. That’s the standard, not the sales pitch.
Our technicians are background-checked, arrive in uniform, and already know the operator brand on your property before the truck pulls up. We train on nine major gate-operator brands, including FAAC, BFT, and Linear, so when we show up to a South Miami job, we’re not reading the manual for the first time on your driveway.
Automatic Gate Installation in Miami
Automatic gate installation in Miami means pairing the right operator, the actuator, the motorized arm that physically pushes or pulls the gate, with a panel built for salt air and humidity. On a standard single swing gate in the Doral or Kendall area, you’re looking at $5,200 to $8,400 parts and labor. A double gate with two actuators runs $7,500 to $11,500. The operator board, the circuit board that controls the motor, gets sealed in a weatherproof enclosure on every job we do in this city, because a standard enclosure under Miami’s 75% plus humidity and summer downpours fails fast.
When It’s the Right Call
If you’re replacing a manual gate with an automated one, or if the existing operator has failed and the gate’s otherwise sound, automatic installation is the move. We run the low voltage wire, set the safety photocells, which are required equipment on any automatic gate in Miami, not an upsell, and program the remotes and keypad. You’ll get the run-through on how the manual release works before we leave.
What We Won’t Skip
On any automatic install near the water, we won’t reuse existing galvanized brackets or hinges. The actuator mounts need to be 316 stainless or powder-coated marine aluminum. It costs more up front, usually $180 to $420 extra depending on the hardware set, and it’s the difference between a gate that runs clean for a decade and one that’s rusted tight by the second August.
Gate Installation Services in Miami
Gate installation services in Miami cover everything from a new driveway swing gate to a pedestrian gate cut into an existing wall. A standard pedestrian gate install runs $1,800 to $3,600, while a full driveway gate with posts, hinges, and hardware typically lands between $4,200 and $8,900 before the operator. Tight shared rights of way in Coral Gables and the Grove often force a slide gate where the original plan called for a swing, and we measure the actual arc before we order anything, because a swing panel that sweeps into a neighbor’s apron or a city sidewalk is a problem you’ll hear about immediately.
Slide Gates for Tight Sites
When the driveway stub off the right of way is short, a slide gate rides on a track or a cantilever system and doesn’t need the clearance a swing arm does. Slide installs run $6,400 to $11,800 depending on the panel length and whether you need a rack and pinion operator, the gear drive that moves the panel along the track. On many Miami Beach and Key Biscayne properties, this is the only option that works without blocking the sidewalk or a neighbor’s cut-through.
Keeping Access Open During the Work
We stage panels on cribbing while the concrete cures so you and your neighbors keep vehicle and pedestrian access through the site. If there’s a pedestrian cut-through off the main driveway, it stays usable. We’ve done installs in Coconut Grove where the only way to set a slide gate was to keep the whole panel up on blocks for three days, and nobody missed a single trash pickup.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Miami
We train our technicians on nine gate-operator brands, and Miami customers most often ask us about FAAC, BFT, Linear, and Viking systems. We stock local parts for these operators in our South Florida shop, which means when a Viking board fails or a FAAC actuator needs swapping, we’re not waiting on a shipment from out of state. For a new install, we’ll recommend the brand that matches your gate’s weight, swing, and your property’s exposure to salt air. The BFT and FAAC lines both hold up well on coastal Miami properties when paired with sealed enclosures and stainless mounting hardware.
Common Gate Installation Problems We See in Miami Homes
- Salt-air corrosion eats standard hardware within 18 months. Galvanized hinges, drop rods, and weld points on properties near Biscayne Bay or the ocean rust through on a 12 to 18 month cycle. We default to 316 marine-grade stainless on every coastal install because inland-grade hardware is a guaranteed callback.
- Tight shared rights of way force slide gates where swing gates were planned. In Coral Gables, Coconut Grove, and much of old Miami, driveways share aprons and the swing arc would sweep into a neighbor’s property or a city sidewalk. We measure the actual site before ordering any panel.
- Hurricane-season flooding kills buried conduit and control boards. After any named storm, we see operators down across Miami Beach and Key Biscayne from water in the conduit or a flooded board. We seal enclosures above grade and slope conduit so flood water drains rather than pools.
- Powder-coat finishes break down fast under Miami UV and humidity. A standard powder coat on a coastal gate fades and chalks inside two summers without a marine-grade topcoat. We spec marine finishes on any install within a mile of the water.
Pricing for Gate Installation in Miami, FL
As a practical range, expect $1,800 to $3,600 for a pedestrian gate, $4,200 to $8,900 for a standard driveway swing gate before the operator, and $6,400 to $11,800 for a slide gate on a tight Miami site. The operator itself runs $1,200 to $2,800 depending on brand and capacity. Marine-grade stainless hardware adds $180 to $420 to the hardware line, and we’ll tell you if your site actually needs it before we quote. Every Portcullis estimate is written, itemized, and agreed before any work starts. There is no version of this job where we surprise you with a number at the door. Call (940) 412-7340 and we’ll schedule a free measure and give you the written price.
We Also Serve Cities Near Miami
Our Gate Installation team covers the full Miami metro, including Miami Beach, Coral Gables, Key Biscayne, and Hialeah. If you’re on a barrier island or out toward the Doral and Kendall communities, we dispatch from our South Florida office and can usually have a technician at your property the same week you call.
Serving Miami, FL - Our Local Coverage Area
We’re based in the Miami area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Miami
Because the driveway stub off the right of way is too short and the swing arc would sweep into a neighbor’s shared apron or a city sidewalk. Swing gates need clearance equal to the panel width in front of the opening, and Coral Gables and the Grove are full of tight shared driveways where that clearance simply isn’t there. A slide gate rides parallel to the fence line instead, so it needs almost no forward clearance. We measure before we quote, and if the swing won’t work, we’ll tell you the slide price instead of selling you a problem. Call (940) 412-7340 and we’ll measure your site free.
No. On Miami Beach and Key Biscayne barrier-island properties, standard galvanized hinges and drop rods seize solid within one to two summers. The salt air off the Atlantic and Biscayne Bay corrodes zinc plating far faster than people from inland expect. We default to 316 marine-grade stainless steel hardware as the minimum spec on any water-adjacent install. It costs more up front and it means we’re not back in eighteen months replacing rusted hardware we already installed.
Yes. We stage gate panels on cribbing while post footings cure so vehicle access stays open through the site, and if there’s a pedestrian cut-through off the driveway, it remains usable for the duration of the job. On tight Coconut Grove sites we’ve kept neighbors’ walkways open while setting slide panels on blocks for days at a time. The job takes as long as the concrete needs, and we plan the staging around keeping people moving. Call (940) 412-7340 to talk through your specific entrance layout.
Yes. Photocells, the sensors that detect an obstruction and stop the gate from closing on a person or vehicle, are required equipment on any automatic gate installation in Miami, not an optional add-on. We install them as standard on every automated swing and slide gate, set to the correct height for vehicles and pedestrians, and we test them before we leave. If a gate company quotes you an automatic install without photocells, that’s a red flag about what else they’re skipping.
Flood water gets into buried conduit and kills control boards, which is why we see a wave of operator failures across Miami Beach and Key Biscayne after every named storm. We slope conduit so water drains instead of pooling at the board, mount enclosures above grade where possible, and seal every penetration. If your gate went down after the last storm, the fix is usually a new sealed board and a conduit drainage correction, and the Kingswell Guarantee covers that repair for 365 days in writing.
If your gate needs replacement or you’re planning a new install on a tight Miami lot, call (940) 412-7340. A live person answers, we schedule a free measure, and you get the written price before any work begins. That’s the Kingswell Way, and it’s been the standard on every Portcullis job since 2008.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Miami since 2008.