Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across North Las Vegas
A new driveway gate installation in North Las Vegas typically runs $2,800 to $7,500 for a standard single swing gate with an automatic operator, while full double-gate systems with welded steel frames and high-end openers land between $6,000 and $12,000. We’re a Kingswell company serving North Las Vegas homeowners and HOAs, and we answer the phone with a live person around the clock. Call (940) 412-7340 and we’ll give you a written price before a single bolt gets turned.
We know this part of the Valley. We know Aliante, El Dorado, and the 89084 and 89086 ZIP codes, and we know the boom-era gate hardware that’s now failing across entire neighborhoods at once. Our Gate Installation team works with background-checked, uniformed technicians who show up when we say they will.
Why Portcullis Gate Repair Is North Las Vegas’s Preferred Gate Installation Company
Portcullis Gate Repair has operated as a Kingswell company since 2008, and every North Las Vegas job carries the same written Kingswell Guarantee: a written price before work starts, a real arrival window, a clean job site, and a written guarantee on the repair. That’s not a franchise promise. It’s a written one, stamped on your invoice.
North Las Vegas homeowners have been burned before. A tech doesn’t show. A quote doubles at the door. A weld fails six weeks later. We built our reputation here by doing the opposite. If a repair fails within 365 days, we come back and fix it at no charge under the 365-Day Done Right Promise. That’s the Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails.
Dean Prescott, who leads our team, insists on one standard: the price you’re quoted is the price you pay. Not a penny more after the gate is disassembled and sitting in your driveway.
Electric Gate Installation in North Las Vegas
Electric Gate Installation in North Las Vegas means taking a gate that swings or slides by hand and adding a motorized operator, safety sensors, and a control system that opens it automatically from a remote, keypad, or phone app. In this climate, it also means making sure the operator can survive 110-degree summers without cooking its own circuit board. Most North Las Vegas electric gate installs run $3,500 to $8,000 depending on gate width, operator type, and whether we need to trench a power line to the gate.
Adding an Operator to a Manual Gate
Plenty of North Las Vegas homes were built with an ornamental iron gate and no operator at all. Adding one is straightforward when the gate is hung square and the post is solid. We check the post footing first, because a gate that sags under its own weight will kill a new operator in a season.
Replacing a Dead HOA Operator
In master-planned communities like Aliante, a single failed control board can take down an entire neighborhood entry. When that happens, the HOA board calls us because we stock parts for the systems that were installed during the 2000s buildout and we know how to swap a Viking or DoorKing unit without leaving the community without access for a week.
Driveway Gate Installation in North Las Vegas
Driveway Gate Installation in North Las Vegas is the job we do most often, because the dominant housing stock here is 1990s and 2000s stucco tract homes set behind concrete block perimeter walls with wrought-iron driveway gates. Those gates are now 15 to 20 years old, and the powder-coat finish on many of them has bleached and embrittled under the desert sun. A new welded steel driveway gate with an automatic operator in North Las Vegas runs $3,200 to $6,800 for a single swing, or $6,500 to $11,500 for a double swing.
New Construction and Full Replacements
Some North Las Vegas homeowners are replacing a gate that was never built right in the first place: undersized posts, thin-gauge steel, or hinge welds that fatigue after a few hundred cycles. We pour new post footings, set heavier posts, and hang the gate so it swings true from day one.
Adding Automation Where the Builder Left It Out
This is a North Las Vegas specialty. Builders in the boom years often installed a perfectly good manual gate but ran no conduit, no power, and no control wiring to the street. We trench the 120V line, run the low-voltage loop-detector wire, and install the operator and safety edges so the gate finally works the way it should have from the start.
Trusted Brands We Service in North Las Vegas
Our technicians are factory-trained on the systems we see most in North Las Vegas: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In this market specifically, we keep local stock of the controllers and boards that the Aliante HOA entries were built with, because when a Dragon or an Elite unit goes down in July, the board doesn’t care whether it gets ordered overnight. The board cares whether it gets replaced the next day.
Common Gate Installation Problems We See in North Las Vegas Homes
- Entire HOA entries failing in clusters. Original mid-2000s Elite and LiftMaster slide-gate operators in Aliante were installed during the same construction window and have baked through the same extreme heat cycles. When one fails, its siblings usually follow within the same season.
- Caliche dust scoring rack-and-pinion gears. Undeveloped desert parcels still surround many North Las Vegas subdivisions, and that fine particulate works its way into motor housings and slide-gate tracks. We see rack gears worn smooth years before the operator’s rated lifespan.
- No dedicated power run to the gate island. Builders installing manual gates in the 2000s boom rarely trenched conduit or a 120-volt circuit to the street. Automating those gates means adding the power design the original build skipped.
- UV-bleached powder-coat and rusty hinge posts. The intense North Las Vegas sun breaks down powder-coat finishes on ornamental iron within a few years, exposing bare metal to oxidation even in a low-humidity climate. We often replace the gate and the post before the operator itself gives out.
Pricing for Gate Installation in North Las Vegas, NV
The honest numbers for this market, before a single bolt gets turned:
- Single swing driveway gate with automatic operator: $2,800 to $6,800
- Double swing driveway gate with automatic operator: $6,500 to $11,500
- Sliding gate installation (steel frame, rack and motor): $4,500 to $9,000
- Pedestrian walk-through gate with keypad lock: $900 to $2,400
- Automating an existing manual gate, including power run: $3,000 to $6,000
What moves the number? Gate width, post footing conditions, whether we’re trenching power across 40 feet of desert hardpan or tapping into an existing pedestal at the corner of the house, and which operator you choose. You’ll get the price in writing before any work starts, and that price covers the full install, not just the parts. Call (940) 412-7340 for a free estimate specific to your gate and your street.
We Also Serve Cities Near North Las Vegas
Our crews also cover Gate Installation in North Las Vegas as well as Las Vegas, Henderson, Boulder City, and Mesquite. We schedule locally, so a North Las Vegas job gets a North Las Vegas crew, not a dispatcher routing someone in from across the Valley.
Serving North Las Vegas, NV - Our Local Coverage Area
We’re based in the North Las Vegas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in North Las Vegas
Yes. A shared HOA entry operator is separate from the gate on your own property line. Your driveway gate is yours, and you can automate it, replace it, or add a new operator without touching the community entry system. We coordinate with HOA boards in Aliante and the surrounding master-planned communities to make sure the work doesn’t conflict with any community standards. Call (940) 412-7340 and we’ll walk you through what your specific HOA’s CCRs require.
Because the manufacturer’s estimate wasn’t written for North Las Vegas. Operators rated for thousands of cycles assume moderate temperatures, not five straight months where the unit sits in 110-plus-degree heat. Circuit boards degrade, rubber seals harden and crack, and grease breaks down and thins out. Add the fine caliche dust that blows off undeveloped desert parcels around the north end of the Valley, and you get premature failure exactly like the cluster failures we see across Aliante every summer. Our techs know which boards run hot and which seals need replacing before the heat hits.
You can use solar, but for most North Las Vegas driveways a dedicated 120V run is the better call. Solar operators work when the panel gets direct sun and the battery stays charged, but dust accumulation on the panel cuts output and this climate is unkind to batteries. If you already have a pedestal or exterior outlet near the gate, we can tap it directly. If not, we trench a dedicated circuit to the gate island, which is what we ended up doing on an Aliante HOA entry in the 89084 ZIP where the original builder had never run conduit or power to the gate at all. Budget $1,200 to $2,400 for a new power run depending on distance and whether the soil is hardpan or sand.
Any new automatic gate in North Las Vegas needs entrapment protection: safety photocells across the gate opening, reversing edges or contact sensors on the gate leaf itself, and a control board that complies with UL 325 standards for automatic gate operators. That’s not optional, and we install it on every automatic gate job. The goal is simple: nobody, not a kid, not a dog, not a delivery driver, gets pinned by a gate that doesn’t know they’re there. We set the sensors to catch anything in the path and reverse immediately.
In most cases, yes. We automate manual gates all over North Las Vegas. The gate needs to be hung square, the post needs a solid footing, and we need a power source. If the post is leaning or the welds are tired, we fix that first, because automating a sagging gate just means the operator burns itself out fighting the misalignment. Once the gate is sound, we install the operator, safety photocells, edge sensors, and your choice of remote, keypad, or app control. Expect $3,000 to $6,000 including the power run if we need to trench one. Call (940) 412-7340 for a written price.
If you’re in North Las Vegas and you need a gate installed, automated, or replaced, call us at (940) 412-7340. A live person answers, we schedule a real window, and we put the price in writing before any work starts.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving North Las Vegas.