Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Orlando
New gate installation in Orlando typically runs $2,400 to $9,800 depending on the gate type, operator, and site conditions. Most single swing gates with an opener land between $3,200 and $5,500. We quote the full job in writing before any work starts, and we arrive in the window we give you. Dean Prescott and our Orlando crews know the subdivision tight lots, shared driveways, and HOA requirements here, and we build every install around one rule: vehicle and pedestrian access keeps working the whole time. Call (940) 412-7340 for a free on-site measure and a written price.
Why Portcullis Gate Repair Is Orlando’s Preferred Gate Installation Company
Portcullis Gate Repair has operated as a Kingswell company since 2008, and every job in Orlando carries the same four written promises: a price before the work, a real arrival window, a clean job site, and a written guarantee on the installation. That guarantee runs 365 days under our Done Right Promise. If something fails inside that window, we come back and fix it at no charge. No callback queues, no voicemail trees. A live person answers our phones 24/7, including holidays, because a stuck entry gate on a check-in day in the vacation rental belt doesn’t wait for Monday.
Our technicians are background-checked, uniformed, and factory-trained across nine operator brands, so the crew that shows up in Winter Park or Goldenrod already knows the specific system before the truck pulls in. We serve the whole Orlando metro from a local office, and because we live and work here, we know which subdivisions have narrow rights of way, which HOAs require specific finish colors, and where the soil runs sandy under the turf. That local knowledge changes how we set posts and spec operators.
Sliding Gate Installation in Orlando
Sliding gate installation in Orlando is the right call when a swing gate won’t fit. On tight lots where a driveway runs perpendicular to the street, or where the property line leaves only a few feet of setback, a swing gate’s arc would block the sidewalk or clip a car in the shared driveway. Orlando’s post-1980s and 1990s-2000s HOA subdivisions were built dense, and thousands of those entries simply have no room for a swinging leaf. A cantilever slide gate rides on rollers and a track above the ground, moving sideways along the fence line instead of swinging into the driveway. In Orlando’s sandy Central Florida soil, we set post footings deeper than the county minimum because shifting posts are the number one reason a new slide gate goes out of alignment inside twelve months.
When a Shared Driveway Forces a Slide Gate
Shared driveways and narrow rights of way are everywhere in Orlando’s master-planned communities. If two or three homes share one entrance lane, a swing gate stored open block someone’s access and a stored-closed swing gate blocks everyone. A cantilever slide gate hugs the fence line and leaves the full driveway width clear. We’ve done this exact swap in subdivisions near the US-192 corridor where the original builder installed a swing gate with inches of clearance and the result was a decade of sag correction calls.
Rack and Pinion vs Chain Drive
For most Orlando homes, a rack and pinion drive is quieter and needs less adjustment than a chain drive after the first year. Chain drives stretch in humidity and salt air. Rack drives cost more up front but hold alignment better on gates that cycle frequently. If your gate will open more than twenty times a day, the rack is usually the better spend. We’ll quote both options so you decide with the numbers in front of you.
Gate Opener Installation in Orlando
Gate opener installation in Orlando means matching the operator to the cycle count, not just the gate. A standard residential operator like a Ghost Controls or LiftMaster residential model is rated for maybe 20 to 30 cycles a day. That’s fine for a single-family home. It is not fine for a vacation rental subdivision near Champions Gate or Reunion Resort, where rotating Airbnb and VRBO guests push the same entry gate through hundreds of cycles daily. In those cases we spec a higher-duty operator, add surge protection for the daily sea-breeze lightning, and wire the keypad and safety edges so the board does not get fried the first storm season. A typical gate opener installation in Orlando runs $1,100 to $2,800 for the operator, wiring, keypad, and safety photocell pair, parts and labor.
Surge Protection in Central Florida
Orlando sits under one of the highest lightning-strike-density zones in North America. The sea-breeze thunderstorms build nearly every afternoon from June through September, and gate control boards are among the most common casualties. We install a dedicated surge suppressor on every new opener we put in, and we hard-wire the keypad receiver through it. Without that, a new board can get cooked inside the first summer. This is standard practice for us here; your gate should not be the neighborhood’s annual storm sacrifice.
Keypads, Phone Entry, and Safety Photocells
A new opener usually includes a weather-sealed keypad, phone-line or cellular entry for guest access, and a pair of safety photocells mounted near the gate’s travel path. In Orlando’s rental communities, the phone entry system often matters more than the keypad, because property managers rotate door codes weekly and guests arrive tired after a flight. We tie the opener into the existing entry system or install a new one and program it before we leave. Every opener gets tested through a full open-close cycle with the photocell obstructed to confirm it reverses. That test is not optional, and we do it on every single install.
Trusted Brands We Service in Orlando
Our technicians train on and install operators from Linear, Viking, Ghost Controls, DoorKing, and five other major gate-operator brands. That matters in Orlando because the rental corridor has a lot of Ghost Controls and older Linear units that were never spec’d for the cycle counts they absorb, and a lot of DoorKing and Viking hardware on the nicer HOA entries around Winter Park and Maitland. We keep common control boards, keypad kits, and safety edge hardware stocked locally so a same-week install does not stall waiting on a shipped part. When you call, the tech who shows up already knows your operator, not just your address.
Common Gate Installation Problems We See in Orlando Homes
- Shared driveways with no swing arc. Many Orlando HOA lots were platted so tight that a swing gate physically cannot open without hitting a car or blocking a sidewalk. Forcing one in guarantees sag correction calls at the hinge post within months. A slide gate is the honest fix.
- Vacation-rental cycle counts burning out residential operators. Near Champions Gate and Windsor Hills, entry gates cycle hundreds of times daily. A residential-grade Ghost Controls or LiftMaster unit will cook its motor or board months after install. We spec near-commercial duty on those jobs from day one.
- Storm-fried control boards. Orlando’s daily sea-breeze lightning kills keypad receivers and logic boards. Any new install without surge protection becomes a repeat service call inside the first storm season. We wire surge suppression into every opener.
- Shifting posts on sandy soil. Central Florida’s sandy soil does not hold shallow footing the way clay does up north. Posts set to the Florida minimum depth will shift, throwing a new slide or swing gate out of alignment. We over-dig on Orlando installs as standard practice, and we tell you why before we pour.
Pricing for Gate Installation in Orlando, FL
Here are honest Orlando market ranges, parts and labor, written before any work starts. A basic single swing gate with a residential opener and keypad starts around $3,200. A double swing gate runs $4,800 to $7,500. A cantilever sliding gate with a rack and pinion drive and higher-duty operator starts near $5,500 and climbs to $9,800 for long spans or custom finishes. Pedestrian gates with a keypad and maglock run $1,800 to $3,400. Ornamental aluminum costs more than chain-link but survives Orlando’s year-round humidity far better, and that humidity is the main reason we steer Orlando customers toward aluminum or powder-coated steel over wood. The price we quote is the price you pay, and it includes the site measure, the permit-ready drawing if your HOA requires one, and the written 365-day guarantee.
Call (940) 412-7340 and we’ll send someone out to measure. The estimate is free and the number is in writing before you decide anything.
We Also Serve Cities Near Orlando
Our crews work throughout the Orlando metro every week, from Winter Park and Maitland up through Altamonte Springs, and east into Goldenrod. If you’re in one of those nearby cities and considering Gate Installation, the same written price, the same arrival window, and the same 365-day guarantee apply. We dispatch from our Orlando office, so response time stays short across the whole service area.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Orlando
Yes. We stage the work so one lane stays live the entire day. On the Windsor Hills vacation-rental job off US-192, a property manager called us after a burned-out LiftMaster swing operator stranded three arriving guest parties at the entry. The existing swing gate had only inches of clearance to the shared driveway, so we installed a cantilever slide gate instead and kept one lane open while we set post footing, retrofitted the rack and pinion drive, and tied in the keypad and safety photocell. The gate was cycling cleanly before the evening check-in window. On almost every Orlando shared-access job, we keep one lane live. Call (940) 412-7340 to talk through your specific entry.
A cantilever slide gate is almost always the answer. It moves parallel to the fence line instead of swinging into the driveway, so it needs no arc space at all. We’re use to this exact situation in Orlando’s denser HOA subdivisions from the 1990s and 2000s, where builders left just enough room for a car and not much else. We can also build a vertical pivot gate if the entry is too tight even for a slide track, though that’s less common. We’ll measure, show you both options, and give you a written quote for each before you commit.
One rated for near-commercial cycle counts. A standard residential operator – Ghost Controls, Mighty Mule, residential LiftMaster – is spec’d for roughly 20 to 30 cycles a day. A vacation rental entry near Champions Gate or Reunion Resort sees hundreds. We install higher-duty LiftMaster or DoorKing operators on those jobs, add phone-line or cellular guest entry, and wire in surge protection for the sea-breeze lightning. The price is higher up front, but it’s the difference between a ten-year install and a burned-out board six months later.
Yes, and we treat them as mandatory. Safety photocells detect an obstruction in the gate’s path and reverse the operator before it pins a person or a car. Most Orlando HOAs require them, and Florida building code expects them on any automated pedestrian or vehicle gate. We test every install by obstructing the beam mid-cycle and confirming the gate reverses. If a gate company quotes you an opener without photocells, that’s a red flag.
They can destroy an unprotected control board inside one summer. Central Florida has one of the highest lightning-strike densities in North America, driven by the daily sea-breeze thunderstorm convergence. Gate operator logic boards and keypad receivers are common casualties. We install a dedicated surge suppressor on every new opener we put in and run the keypad receiver through it. The surge unit costs a small amount and prevents a repeat service call the first time a storm sits over your street. Call (940) 412-7340 and we’ll include it in your written quote.
We install gates that hold up to Orlando’s humidity, storms, and rental-corridor cycle counts, and we never stop your access while we work. Call (940) 412-7340 for a free on-site measure and a written price. A live person answers, day or night.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Orlando and the surrounding metro since founding the company in 2008.