Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Rodeo
New gate installation in Rodeo typically runs $1,900 to $6,800 for a driveway gate, with electric gates starting around $3,200. We quote a written price before any work starts, and our crews know this stretch of Contra Costa County well. If you’re on Parker Avenue near the refinery or up closer to Rodeo Avenue, you’ve dealt with the same thing every property here deals with: salt air and corrosion that eats gate hardware fast. Call (940) 412-7340 and we’ll give you a range over the phone, then a written quote at your property.
Rodeo is not a place where you can hang a bare-steel gate and forget about it. The salt fog off San Pablo Bay, combined with what drifts over from the Phillips 66 refinery, means metal fails here faster than in Hercules or Crockett. We build every gate installation in Rodeo around that reality.
Why Portcullis Gate Repair Is Rodeo’s Preferred Gate Installation Company
We’ve been at this since 2008 as part of the Kingswell family, and every Portcullis location is independently owned and operated but held to the same written standard: the Kingswell Guarantee. That means a written price before any work begins, a real arrival window, a clean job site, and a written guarantee on every repair and installation. Dean Prescott leads our team, and he insists that no customer in Rodeo ever sees an invoice bigger than the quote they approved.
Our technicians are background-checked, uniformed, and trained on nine major gate operator brands. When the truck pulls up to your driveway in Rodeo, you know exactly who’s stepping out. More importantly, the tech already knows your operator’s wiring, your gate’s swing direction, and what the salt air has likely done to the hinges.
The 365-Day Done Right Promise is simple: if your gate installation or repair fails within a year, we return and correct it at no charge. If that means a second visit, you pay nothing for it. That’s not a marketing line. It’s stamped on every invoice we write in Rodeo.
Electric Gate Installation in Rodeo
Electric Gate Installation in Rodeo means converting a manual swing or slide gate to automated operation, and the first thing we assess isn’t the motor. It’s the gate itself, specifically whether the existing frame and hinge posts can survive another few seasons of Rodeo’s salt-plus-refinery corrosion load. We quote electric gate installations in Rodeo from $3,200 to $6,800 depending on gate length, actuator type, and the control board you choose. Every quote includes the operator, safety photocells required under UL 325, and hot-dip galvanized or powder-coated hardware as standard, not as an upgrade.
Older homes in Rodeo, especially the 1940s and 1950s refinery-worker houses, often have gates with no existing electrical run. That changes the scope. We account for trenching, conduit, and a dedicated circuit in our written price, so you’re not surprised later.
Retrofit or Replace
Some legacy gates in Rodeo can be retrofitted with a new operator and safety edges. The question we ask first: is the gate itself square and the hinge post footing solid? If the post has rotted from the ground up in the marine fog, retrofitting is throwing money at a failing structure. In that case a new gate and post reset costs less than a year of patchwork.
Operators We Install
Three brands dominate most Rodeo driveways: LiftMaster, FAAC, and BFT. LiftMaster is the workhorse for residential swing gates, while FAAC and BFT offer the duty cycles we recommend for heavier custom gates near the refinery, where the air demands more from every moving part. We stock common parts for all three locally, so turnaround stays tight.
Driveway Gate Installation in Rodeo
Driveway Gate Installation in Rodeo usually means either replacing a rusted 1960s chain-link gate or adding a first-ever driveway gate to a 1940s or 1950s home. We quote typical driveway gate installations in Rodeo between $1,900 and $4,800 for a single swing gate, and $3,200 to $6,800 for a double gate or an automated slide gate. The range depends on gate length, material, whether we’re resetting posts, and whether you want automation included.
What you won’t see in our quote: bare-steel hinges, raw steel latch plates, or any unpainted hardware. In most of Contra Costa County, galvanizing is a nice-to-have. In Rodeo, it’s the floor. We’ve pulled hardware off gates a few blocks from the refinery fence line that rusted through completely in under three years.
Swing Gates
A single swing gate is the most common driveway installation in Rodeo, especially for the narrow side yards on the older refinery-worker lots. We hang it on a steel post set in concrete, then check the swing arc against the driveway slope. If the gate drags on the concrete, it’s usually a post footing problem, not a panel problem.
Sliding Gates
Sliding gates work well on Rodeo properties where the driveway slopes or the setbacks are tight. They ride on a track and cantilever rollers, so salt fog tends to attack the roller bearings first. We spec sealed bearings and galvanized track from the start on any slide gate in Rodeo.
Trusted Brands We Service in Rodeo
We service and install FAAC, BFT, Linear, and Viking operators, and we keep common boards, arms, receivers, and safety photo-eyes on hand for fast turnaround around Rodeo, Hercules, and Pinole. If your existing FAAC swing operator is healthy but the safety eyes are obsolete, we can often retrofit just the safety circuit and keep the rest running. If your BFT or Viking board is dead, we’ll quote you the board, labor, and a written guarantee before ordering anything.
Common Gate Installation Problems We See in Rodeo Homes
- Rusted-through hinges and latches on 1940s to 1960s gates. Bare steel near the Phillips 66 fence line lasts two to three seasons, not decades. We replace it with hot-dip galvanized or powder-coated hardware on every installation.
- Obsolete operator control boards that can’t talk to modern safety photocells. UL 325 entrapment protection is law for new installations. Many legacy boards in Rodeo predate that standard and can’t interface with current photo-eyes, so replacement is mandatory.
- Sagging gates that drag on the driveway concrete. Almost always the hinge post footing has rotted from the ground up in the bay fog, while the gate frame looks straight. We reset the post in concrete and rehang, rather than shimming the panel.
- Marine corrosion on operator chassis and actuator arms. The same salt fog that rusts gate hinges also attacks the actuator housing. On installations near the bay side of Rodeo, we seal penetrations and specify operators rated for the exposure.
Pricing for Gate Installation in Rodeo, CA
Here’s what you’re looking at in Rodeo, honestly. A manual single swing driveway gate runs about $1,900 to $4,800. An electric slide or double swing gate lands between $3,200 and $6,800. A pedestrian gate alongside the driveway adds $600 to $1,400 depending on width and hardware. A retrofit operator only, where the gate structure is solid, runs $1,600 to $3,400. Every one of these numbers comes as a written quote, agreed before any work starts. Call (940) 412-7340 for a free estimate and we’ll give you the exact number for your property, including any electrical run, post reset, or corrosion correction the job needs.
We Also Serve Cities Near Rodeo
Our crews regularly handle Gate Installation work across the shoreline and inland from Rodeo: Hercules and Pinole to the south, El Sobrante to the east, and Benicia across the bridge. The corrosion picture is similar in all of these towns, though Rodeo’s refinery adjacency makes it the most aggressive environment we work in.
Serving Rodeo, CA - Our Local Coverage Area
We’re based in the Rodeo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Rodeo
Usually not. If your operator predates UL 325, it can’t communicate with modern non-contact safety photocells, and code requires those eyes on any new installation. We can often install a modern control board that works with your existing motor, but the old board has to go. Call (940) 412-7340 and describe your operator; we’ll tell you over the phone whether your model is a candidate for a board swap.
Because the air there carries a double load: salt-laden marine fog from San Pablo Bay and sulfur and hydrocarbon emissions from the refinery. Together they create acidic corrosion that eats bare steel fast. That’s why we refuse to install unpainted hardware in Rodeo, period. Hot-dip galvanized or powder-coated components are the minimum standard, not an upsell.
Rarely. In most Rodeo cases we inspect, the gate panel is straight and square. The real problem is the hinge post, which has been rotting at the footing line in the marine fog for years. We reset the post in concrete, rehang the gate, and often the same panel works fine. It’s a cheaper fix than buying a new gate, but we won’t know until we see the post.
Yes, if the gate structure and hinge posts are sound. We’ll add an actuator, a control board with safety photocells, an electrical run, and a keypad or remote receiver. Rodeo conversions typically run $2,900 to $5,600. If the existing hardware is rusted past service, we’ll tell you straight: replacement may be the cheaper answer over a five-year horizon.
Sometimes. Rodeo gets enough sun through the marine layer for solar operators to work, but the battery and charge controller live outside in salt air, which shortens their life. For a gate close to the refinery fence line, we recommend an AC-powered operator with sealed electronics over solar. We’ll quote both options and give you our honest recommendation.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Rodeo since 2008.