Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Wellington
Gate installation in Wellington usually runs between $2,800 and $9,500 depending on whether you’re putting in a modest driveway gate or a 20-foot equestrian estate entrance, and the work typically takes two to five days from footing to final programming. We know that range matters before you commit, which is why every Portcullis Gate Repair job starts with a written price. No surprises after we’ve dug the first post hole. If you’re in Saddle Trail, Versailles, or anywhere else in Wellington, call us at (940) 412-7340 and we’ll measure, spec, and quote the whole thing in plain English.
Why Portcullis Gate Repair Is Wellington’s Preferred Gate Installation Company
Wellington isn’t a typical Palm Beach County suburb. The gates out here are wider, heavier, and asked to do more than anywhere else we work in South Florida. We’ve installed driveway gates off South Shore Boulevard, repaired community entrances near Palm Beach Polo & Country Club, and rebuilt equestrian gates in Palm Beach Point where a 50-foot horse trailer has to clear the opening without clipping a post. That changes how we pour footings, what hardware we spec, and how we size the operator. You don’t want a company learning those lessons on your gate.
Every technician who shows up at a Wellington home is background-checked, uniformed, and trained on nine major operator brands including LiftMaster, Viking, and DoorKing. Dean Prescott has run this Portcullis location with one rule: the number we quote is the number you pay, and the guarantee is on paper. That’s the Kingswell Way. We’re an independently owned Kingswell company, which means we’re held to a set of promises that a lot of local outfits simply don’t make: written price before work, a real arrival window, a clean job site, and a written guarantee. Ours runs 365 days.
Gate Installation Services in Wellington
Gate Installation Services in Wellington cover everything from a basic single-swing driveway gate in a Greenview Shores subdivision to a custom bi-parting slide gate on an equestrian property off Lake Worth Road. A straightforward pedestrian gate with a manual latch runs about $800 to $1,600 installed. A double swing driveway gate with automation lands between $4,500 and $8,500. Custom 18-foot estate gates with heavy-duty operators typically fall between $7,000 and $14,000 in the Wellington market, driven mostly by gate size, post depth, and operator capacity.
New Driveway and Estate Gates
We build and install swing gates, sliding gates, and double gates sized to the opening, not to a catalog. Most Wellington driveway gates are aluminum or steel, but the hardware spec matters more than the panel here. We use galvanised brackets, stainless hinges, and sealed operator housings because the local humidity and UV punish anything less. Every quote includes the gate, posts, hardware, operator, and programming before we ever bring tools off the truck.
Pedestrian Gate and Security Gate Install
Pedestrian gates often get built as an afterthought next to a vehicle gate, and then the latch fails within a year because the post flexes in Wellington’s fill soil. We set pedestrian gate posts deeper than the panel seems to require, because the gate will lean the moment the ground gets saturated. For security gates on rental properties or community entrances in developments like Versailles, we also handle access control wiring and code compliance at the same time.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Wellington
Electric Gate Installation in Wellington is the specialty most of our local calls revolve around, because a manual 20-foot estate gate is a daily chore and a liability. A new automated swing gate operator with installation runs $1,800 to $4,200 for a typical residential system. Full automation on a wide double gate with a proper LiftMaster or Viking operator, safety edges, and keypad entry lands between $5,500 and $11,000 here. The spread comes down to gate weight, opening width, and whether the existing posts can hold plumb under load.
Automated Swing and Slide Systems
Swing systems work well on Wellington lots with the setback to spare, but the actuator, which is the motorized arm that physically pushes the gate open, has to be sized for weight, not just width. An 18-foot ornamental steel gate near a stable requires an actuator rated at least 400 pounds of pull, or it will stall on the first humid afternoon. Slide systems save space and handle wider openings, but the steel track has to be bedded in compacted base, not straight into the sandy fill we dig through on nearly every Wellington install.
Operator Replacement and Wiring
We do electric gate installs on existing gates as well, which usually means swapping an operator that’s reached end-of-life and re-running low-voltage wiring that Wellington’s wet season has flooded one too many times. Older operators in homes built through the 1990s and early 2000s are now 20 to 35 years old, and their control boards were never designed for this storm profile. All Portcullis automation work includes entrapment protection wired in at installation, not added as an afterthought.
Trusted Brands We Service in Wellington
We install and service Viking, Ghost Controls, DoorKing, and Elite operators, and our technicians arrive already knowing the specific system they’ll be working on. That matters in Wellington more than in most markets, because a LiftMaster that handles a 12-foot residential gate fine will struggle on a 19-foot equestrian gate unless it’s sized correctly. We carry the common replacement parts and control boards for the brands we service, which shortens the wait when a Wellington homeowner needs a swap before the next storm cycle or before the Winter Equestrian Festival brings a trailer down from Ocala.
Common Gate Installation Problems We See in Wellington Homes
- Posts sinking in fill soil. Wellington’s sandy, organic-rich ground doesn’t hold a post the way coquina-influenced soil closer to the coast does. We see gates begin to drag after two or three wet seasons, and it’s almost always the footing that moved, not the hinge.
- Painted steel hardware rusting through. Hinges, hinge posts, and weld beads on painted mild steel pit and bleed rust within a few seasons under Wellington’s UV, humidity, and afternoon storms. Galvanised or stainless components cost more on day one and outlast them by years.
- Lightning-surge control board failures. Palm Beach County has one of the highest lightning-strike densities in the country. Boards that sat connected all summer often won’t cycle when owners return for the January to April winter circuit.
- Operators killed by alignment, not age. When a 16-to-20-foot gate settles out of square, the operator strains, the rack and pinion wear unevenly, and the motor burns out. We’ve replaced operators that died twice before someone fixed the actual geometry.
Pricing for Gate Installation in Wellington, FL
Here’s what Wellington homeowners can expect on a written quote from us. A single swing driveway gate installed, without automation, runs about $2,800 to $5,000. Add an operator and entry system, and you’re at $5,500 to $9,000. A full custom double gate on an equestrian property, including footings, hot-dip galvanised hardware, and a properly sized operator, lands between $8,000 and $14,000. What moves the number is gate width, gate weight, post depth, and whether we’re building on fresh footings or straightening existing posts. The quote you get is the price you pay, in writing, before any work starts. Estimates are free. Call (940) 412-7340 and we’ll come measure properly.
We Also Serve Cities Near Wellington
Our crews serve Wellington and the surrounding communities, including Royal Palm Beach, Greenacres, West Palm Beach, and Palm Beach Gardens. If you’re just outside the village limits, we’ll still come measure your gate and quote it properly. For more detail on what we do across the area, see our Gate Installation page or read more about Gate Installation in Wellington.
Serving Wellington, FL - Our Local Coverage Area
We’re based in the Wellington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Wellington
Wellington’s humidity, near-daily May to October rain, and intense UV break down painted mild steel faster than most of Palm Beach County sees. The hinge posts and weld beads start pitting within two or three seasons, and the rust works inward from there. We spec hot-dip galvanised or stainless hardware on new installs here for exactly that reason.
Call (940) 412-7340 if your hinges are bleeding rust, and we’ll tell you honestly whether the hardware can be saved or should be swapped.
The fix is usually in the footings, not the hinges. Wellington’s fill soil shifts under saturated conditions, and a pair of posts that have crept even half an inch will throw a 20-foot leaf out of square. We re-set the post footings with a wider, deeper pour, switch the hardware to stainless or galvanised, and re-hang the leaves level before we touch the operator.
Call (940) 412-7340 and we’ll send a technician to measure the misalignment and quote a proper fix, not a shim job.
In Wellington, it’s often lightning, or the surge that follows a nearby strike. Palm Beach County’s lightning density is among the highest in the country, and a control board left connected during the wet season is a target. But we also find corrosion in the operator housing and flooded conduits from standing water. We diagnose both before recommending a replacement.
Call (940) 412-7340 and we’ll tell you whether the board is salvageable or whether a protected replacement makes more sense.
Yes. Any new automated gate in Wellington must have functioning entrapment protection, which means sensors, edges, or both, wired in so the gate reverses if it meets an obstruction while closing. We install these as part of every electric gate job, not as an add-on, because a gate that hurts someone or pins a child is a failure of spec, not just an inconvenience.
Call (940) 412-7340 if you’re buying a home with an older automatic gate. We’ll inspect and quote corrective work with the same written-price guarantee.
For a wide single-family estate gate, we tend to spec LiftMaster or Viking operators rated for the actual weight and cycle count of the gate. Ghost Controls and Elite work well on lighter residential systems. A community entrance that cycles dozens of times a day needs a heavier-duty unit, and that’s where DoorKing’s higher-cycle operators earn their cost. We’ll size it to the gate’s weight and daily use, not to the brochure.
Call (940) 412-7340 for a free on-site assessment and a written quote.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Wellington since 2008.