Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Antelope
A broken gate in Antelope is a security problem first and a convenience problem second. Most gate repairs in this area run between $180 and $850 depending on what actually failed, and we typically reach Antelope homes within a 2-hour arrival window. Call (940) 412-7340 and you’ll talk to a live person who can tell you the real cost range before we ever roll a truck.
We know Antelope’s housing stock, and we know what fails on it. The tract-home boom here ran hard from the late 1980s through the early 2000s, which means a dense concentration of side-yard and driveway gates are all hitting the 25 to 35 year mark at the same time. Post rot, hinge fatigue, weld stress, and operator failures are showing up across entire neighborhoods nearly in unison. That’s not a coincidence. It’s the lifecycle of Antelope’s gates expiring on a shared clock.
Why Portcullis Gate Repair Is Antelope’s Preferred Gate Repair Company
Portcullis Gate Repair has been in business since 2008 as an independently owned Kingswell company. The Kingswell Guarantee is the reason customers in Antelope call us back and refer us to neighbors off Walerga Road and Antelope Road. Four promises are stamped on every repair invoice: a written price before any work starts, a real arrival window, a clean job site, and a written guarantee on the repair. No tech touches a bolt until you’ve seen the number on paper.
Our technicians are background-checked, uniformed, and trained on nine major gate-operator brands, so the person who shows up to your Antelope home already knows the specific system on your property. Dean Prescott runs our crew, and he expects every job in Antelope to meet the same standard we’d hold on our own gates. That’s the Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails.
We’re not the cheapest option in Antelope. We’re the option that answers the phone at 2 a.m. when a driveway gate fails and your car is stuck inside.
Metal Gate Repair in Antelope
Metal Gate Repair in Antelope usually comes down to three things: hinge failure, weld fatigue, or post movement. Ornamental steel and wrought-iron driveway gates are all over this community, especially in the subdivisions built between 1990 and 2005. The gate panel itself is often perfectly sound. What fails is what’s holding it up.
Standard metal gate repairs in Antelope run $220 to $680. A basic hinge replacement or latch adjustment sits at the low end. Re-welding a cracked frame or repairing a sagged steel panel lands in the middle. When the post has rotated or the welds have torn repeatedly, you’re looking at post re-setting and structural correction, which pushes toward the top of that range. Every quote is written down before we start, and the 365-Day Done Right Promise covers the repair in writing.
Weld Repair and Panel Straightening
Steel gates in Antelope take a beating from the Sacramento Valley’s temperature swings. Raw steel expands when it’s 105°F in July and contracts through soggy winters, and after 25 or 30 years of that cycling, welds crack and frames twist. We re-weld on-site, straighten the panel where it’s salvageable, and re-tension the hardware. If the panel has cracked through more than once, we’ll tell you honestly whether repair or replacement makes more sense.
Post Reset and Hinge Reconstruction
Here’s what we see constantly in Antelope: the original pressure-treated 4×4 gate posts from the 1990s were set in shallow footings with no gravel drainage. The adobe clay soil underneath has been heaving and shrinking for three decades, and the post has rotated inward 2 to 3 inches. The gate drags. No hinge adjustment fixes it. We reset the post in a properly drained footing, then rebuild the hinge assembly. Post resets run $350 to $750 depending on footing size and access.
Wood Gate Repair in Antelope
Wood Gate Repair in Antelope is mostly about the posts and the frame. The standard 6-foot dog-ear cedar side-yard gate that came with nearly every tract home built between 1985 and 2005 has been baking in intense UV and soaking through wet winters for 30 years. The cedar splits, the frame sags, and the pressure-treated post below grade has often rotted or rotated.
Typical wood gate repair in Antelope runs $180 to $420. A sag correction with new hardware and angle bracing is the common fix and sits in the middle of that range. Full post replacement with a properly drained footing runs higher, especially on shared fence lines where we’re working around a neighbor’s side of the property. You get the written price before we remove a single screw, and the repair carries the 365-Day Done Right Promise.
Sag Correction and Realignment
Most sagging wood gates in Antelope aren’t because the hinges wore out. It’s because the gate span was always slightly too wide for a 4×4 frame, and 30 years of gravity plus clay-soil movement finished the job. We install angle bracing, replace the hinge screws with through-bolts where the frame allows, and re-set the post if it’s moved. The gate closes square again.
Post Replacement in Adobe Clay
Antelope’s adobe-clay soil is the root cause behind most wood gate failures here. The soil expands dramatically in wet winters and shrinks during 105°F summers, and any post set without gravel drainage has been slowly rotating or lifting. We pull the old post, dig the footing deeper, add a gravel drainage layer, and set a fresh pressure-treated post in concrete. The gate panel goes back on, properly aligned, and the repair is guaranteed in writing for 365 days.
Trusted Brands We Service in Antelope
Our Gate Repair team carries parts and diagnostic equipment for FAAC, BFT, Linear, and Viking operators, along with five other major brands. When a homeowner in Antelope has a FAAC hydraulic operator that’s losing pressure or a Linear control board that’s stopped responding, the tech who arrives already knows the unit. We stock common boards, remote receivers, photocells, and limit switches, so most operator repairs in Antelope are done in a single visit rather than waiting on a shipped part.
Common Gate Repair Problems We See in Antelope Homes
- Rotated hinge posts from undrained adobe clay. The original 4×4 pressure-treated posts throughout Antelope were set in shallow footings without gravel drainage. Three decades of wet-dry cycling has rotated them inward, so gates drag on the latch side even when the panel is perfectly straight.
- Sagging panels on shared driveway easements. Many Antelope homes share access with a neighbor, and the gate sits at a property line or right of way. Sag correction has to happen in place because there’s no room to remove and rebuild the entire assembly without blocking both driveways.
- Welds and steel frames fatigued by extreme temperature swings. Sacramento Valley summers hit 105°F regularly, and raw steel expands and contracts hard through the seasons. Weld failure and frame twist show up faster in Antelope than in cooler coastal cities.
- UV split cedar side gates and failing operator safety edges. Intense sun splits the 6-foot dog-ear cedar panels common across Antelope’s tract neighborhoods, and automatic gate operators that rely on aging safety edges and photocells stop reversing correctly as wiring degrades.
Pricing for Gate Repair in Antelope, CA
Here are honest ranges for Antelope’s market. Wood gate sag correction and hardware replacement runs $180 to $420. Metal gate hinge replacement and latch rebuild runs $220 to $480. Weld repair and panel straightening on ornamental steel runs $280 to $650. A full post reset with gravel-drained footing, whether wood or steel post, runs $350 to $750. Electric operator repair, including troubleshooting and board replacement, runs $190 to $580 depending on brand and age.
These are real numbers, not teasers. What moves a job within the range is access, footing depth, and whether we’re working around shared easements. The price you see is the price you pay, written down before any work begins.
We Also Serve Cities Near Antelope
Our Gate Repair in Antelope service area also reaches North Highlands, Elverta, Rio Linda, and Citrus Heights. If you’re on the edge of Antelope near one of those city lines, call (940) 412-7340 and we’ll confirm coverage and a real arrival window.
Serving Antelope, CA - Our Local Coverage Area
We’re based in the Antelope area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Antelope
Because in Antelope, the post is usually the problem, not the panel. The original 4×4 posts under most tract-home gates here were set in shallow footings without gravel drainage, and the adobe clay has been heaving and rotating them for decades. Fixing the hinges without re-setting the post means the gate will sag again within a year. We reset the post properly, then correct the gate alignment, and the 365-Day Done Right Promise covers it in writing. Call (940) 412-7340 for a free estimate.
Yes. We work on shared driveway easements across Antelope regularly, including the older subdivisions off Elverta Road where rights of way leave no swing room at all. We plan the repair around both properties, keep one access lane open where the site allows, and coordinate timing with you and your neighbor before we start. The written price covers the access complications before we begin, not as a surprise add-on after.
In many Antelope lots, yes. Tight side yards and shared driveways leave no space for a swing panel to arc open, so a slide gate mounted on a track or cantilever system is the practical fix. We assess the setback, existing post locations, and operator compatibility, then give you a written price for a slide gate conversion that keeps your current operator where possible. It’s measured, ordered, and scheduled; same-day installation is not how slide conversions work.
Antelope is unincorporated Sacramento County, so gate and fence permits fall under Sacramento County Development Services codes, not a city building department. That distinction trips up out-of-area contractors who assume local city rules apply. For a like-for-like repair, most jobs don’t require a permit, but a full replacement that changes height, size, or setback often does. We’ll tell you which applies to your specific project as part of the estimate.
Usually it’s the photocells or the safety edge, but it can also be a failing control board or worn limit switches, especially on older LiftMaster, FAAC, or Linear units in Antelope’s heat. Our tech runs full diagnostics on the operator and the sensor loop before replacing anything, so you don’t pay for a board when the real issue is a pair of misaligned photocells. Operator diagnostics run $190 to $580. Call (940) 412-7340 and we’ll give you the straight answer before we send anyone out.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Antelope and surrounding Sacramento County communities since 2008.