Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Clovis
Gate repair in Clovis usually costs between $185 and $650 for common fixes like hinge replacement, post resetting, and operator realignment, with most jobs completed the same day we arrive. The harder truth in this city is that thousands of 1990s and 2000s tract homes are now hitting the same failure point at once, because they were built with the same gates, the same hardware, and the same lightweight post footings in the same expansive clay. Our Gate Repair team works all over Clovis, from the Buchanan-area tracts near Teague Avenue to the older equestrian parcels west of Old Town. If your gate is sagging, grinding, or refusing to close, call (940) 412-7340 and a live person will pick up, day or night.
Why Portcullis Gate Repair Is Clovis’s Preferred Gate Repair Company
We’ve been doing this since 2008, and we’ve seen what happens when a gate company treats Clovis like just another stop on a Fresno route. Technicians who don’t know the local soil, the shared-driveway layouts, or the tract-builder hardware rush a fix that fails six weeks later. That pattern has burned a lot of homeowners here, and it’s exactly what we built Portcullis to avoid.
Every Portcullis location is independently owned and operated, but held to the identical Kingswell Guarantee: a written price before any work starts, a real arrival window, a clean job site, and a written guarantee on every repair. For Clovis customers, that means the technician you book is the technician who shows up, in uniform, background-checked, and already familiar with the gate hardware common in your subdivision. We service LiftMaster, Linear, DoorKing, and Viking operators, among others, and we stock common parts locally so most Clovis repairs don’t wait on a parts truck from out of town.
Dean Prescott leads our team, and he holds every one of us to one standard: if the repair isn’t done right, we come back and fix it at no charge under the 365-Day Done Right Promise. That guarantee is stamped in writing on your invoice, not promised over the phone and forgotten. When you’re in Clovis and your gate won’t close, call (940) 412-7340 and you’ll get a real person who can schedule you promptly and tell you what to expect before the truck ever pulls into the driveway.
Metal Gate Repair in Clovis
Metal gate repair in Clovis is our most requested service, and the reason is written into the city’s development timeline. The northeast-side subdivisions built between the mid-1990s and early 2010s went up with tubular-steel and wrought-iron side-yard and driveway gates installed by a handful of the same tract builders, using the same lightweight post anchors and the same hardware. That entire cohort of gates is now 15 to 30 years old and aging in lockstep. A sagging swing gate on one cul-de-sac usually means the neighbors two doors down are weeks away from the same failure.
Post Resetting and Hinge Repair
Our most common Clovis metal-gate repair is resetting a hinge post that has heaved in the valley clay. The San Joaquin Valley’s expansive soil contracts hard in summer, shifts with winter moisture, and gradually tilts posts that were poured with shallow footings. When the post moves, the gate sags, the latch no longer lines up, and no amount of hinge adjustment will hold for long. We dig, reset, and re-pour the footing, then realign the gate so it swings correctly and latches under its own weight. In Clovis, this job typically runs $280 to $650 depending on post size, concrete depth, and whether we need to remove and rehang the gate panel.
Powder-Coat Corrosion and Rust Repair
Clovis summers routinely cross 105°F, and that heat does real damage to powder-coated steel. Once the coating cracks or a bolt gets scraped, the metal underneath is exposed. Then December through February brings dense Tule fog that settles on every exposed surface, and rust takes hold fast, especially on hinges, latches, and gate-operator brackets. We grind out the corrosion, reinforce weakened sections where needed, prime with a rust-inhibiting coating, and repaint. If the rust has eaten through the bottom rail of a tubular gate, we’ll tell you plainly whether it’s worth saving or whether replacement makes more sense. Expect $185 to $480 for typical corrosion repair in Clovis.
Wood Gate Repair in Clovis
Wood gate repair in Clovis splits into two very different jobs depending on which side of town you live on. The tract neighborhoods on the east and northeast sides have mostly wooden fence gates with metal hardware, while the older equestrian-zoned parcels around Old Town Clovis feature full wood ranch-style gates on much larger posts with completely different hardware profiles. Both get hammered by the same heat and fog cycle, but the repairs differ considerably.
Sagging and Rotted Frames
A wood gate in the Clovis summer bakes in direct sun, and the boards dry out and shrink. When winter fog arrives, they swell again. That cycle eventually loosens every screw, splits the frame at the corners, and leaves the gate dragging on the ground. We straighten the frame, reinforce the corners with metal brackets where needed, replace rotted boards, and rehang the gate so it clears the ground fully. For a standard side-yard wood gate in Clovis, frame repair runs $220 to $520 depending on how much of the structure has to be replaced.
Old Town Equestrian and Ranch Gates
The wooden ranch-style gates west of Old Town Clovis are heavier, longer, and usually hung on posts that have been in the ground for decades. The hardware is often older and non-standard, so a replacement hinge off the shelf won’t fit the existing holes. We fabricate or match hardware on site, rebuild gate corners where the wood has checked and split, and reset posts that have leaned over the years. A full repair on one of these equestrian gates in Clovis typically runs $450 to $900, and the deciding factor is whether the post footings are still structurally sound or need to be re-poured.
Trusted Brands We Service in Clovis
Most automated gates in Clovis run on operators from LiftMaster, Linear, DoorKing, or Viking, and our technicians are trained and certified on all of them before they ever step onto your driveway. That matters because an operator misdiagnosis is the most common reason a repaired gate fails again within weeks. We carry common Linear and DoorKing parts in our local stock, so if your automatic gate in Clovis is stuck, grinding, or beeping an error code, we can often fix it on the first visit rather than scheduling a return trip after parts arrive. Whether it’s a Ghost Controls retrofit or a Viking swing actuator, the tech who arrives already knows your system’s wiring, limits, and failure points.
Common Gate Repair Problems We See in Clovis Homes
- Hinge-post heave in expansive clay. The lightweight post footings used by Clovis tract builders shift as the valley soil contracts in summer and re-swells in winter. When the post tilts even a few degrees, the gate sags, the latch misses, and the problem returns if all we do is adjust the panel.
- Powder-coat corrosion from the heat-and-fog cycle. A 105°F summer cracks the coating, then Tule fog from December through February puts moisture directly on bare metal. Hinges, latches, and operator brackets rust faster in Clovis than in most nearby cities because the fog lingers for days at a time.
- Slide-gate failures on shared driveways and rights of way. Many Clovis lots are too tight for a swing gate, so the track, rollers, and safety photocells take daily abuse from vehicles squeezing through narrow clearances. The result is misaligned track, bent rollers, and photocell faults that stop the gate mid-cycle.
- Operator misalignment after post movement. When a hinge post shifts in the clay, an automatic gate’s travel limits, safety sensors, and rack-and-pinion alignment all get thrown off together. Fixing the post without recalibrating the operator leaves the gate stopping short, reversing, or forcing itself against the stop.
Pricing for Gate Repair in Clovis, CA
What you’ll pay for gate repair in Clovis depends on the failure, and we’d rather give you real numbers than talk around them. Hinge replacement runs $185 to $360. Post resetting with a new concrete footing runs $280 to $650. Corrosion repair and repainting runs $185 to $480. Automatic gate operator realignment or repair runs $220 to $550, and a full operator swap usually lands between $600 and $1,400 depending on the model and whether we’re replacing a Linear, DoorKing, LiftMaster, or Viking unit. The price you’re quoted is the price you approve in writing before any work starts, under the Kingswell Guarantee. Call (940) 412-7340 for a free estimate, and we’ll walk through your gate together before we quote it.
We Also Serve Cities Near Clovis
Most of our Clovis customers live in the northeast-side tract subdivisions, but we regularly work in Fresno, Sanger, Fowler, and Madera as well. If your property sits near the edge of Clovis and your gate needs attention, call and ask. We’ll tell you honestly whether you’re in our service area and get you scheduled.
Serving Clovis, CA - Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Clovis
Because most of them were built in the same few years by the same handful of tract builders, using the same lightweight post anchors and hardware. Those gates are now all hitting 15 to 30 years old simultaneously, so a whole subdivision can show the same hinge failure within weeks of each other. We see it constantly in the northeast-side tracts, where fixing one gate on a cul-de-sac often means three neighbors are watching us work and two more will call within the month. If your neighbors’ gates are sagging, yours is likely not far behind. Call (940) 412-7340 and we’ll come look before it fails completely.
Yes, and we plan for exactly that. On shared driveways and rights of way, we keep the work zone tight, stage materials on the street side of the property line, and sequence the repair so the gate comes down only when it has to. We’ve reset and re-poured post footings on Buchanan-area shared lots without ever fully blocking the neighbor’s vehicle access. We’ll tell you upfront what the access plan looks like before we schedule the job, so you can give your neighbor a heads-up with real details.
Usually, yes. Narrow lots and shared driveways in Clovis often don’t have enough room for a swing gate to arc without crossing onto a neighbor’s property or hitting a car. A slide gate runs on a track and moves parallel to the fence line, so it needs far less clearance. We’ve converted several Clovis properties from swing to slide, including tight lots where the only path for the gate track was along the property edge. The conversion typically runs $1,200 to $2,800 depending on track length and operator. Call for a measured, written quote.
A gate that won’t fully close is a security gap, but a gate that reverses unpredictably or forces itself against a stop is a genuine injury risk. The danger comes from the high-tension components: the actuator arm, the gear rack, and the pinch points where the gate meets the post. If your gate is grinding, stopping mid-cycle, or moving unevenly, do not try to force it or test it by hand. Stop using it and call a trained technician. Safety photocells, force-limits, and edge sensors all need to be checked and calibrated whenever a gate has been repaired, and our team handles that as standard on every automatic-gate repair in Clovis. Call (940) 412-7340 and we’ll assess it promptly.
Usually repair, if the post footings are still sound. Most of the older ranch-style wooden gates west of Old Town have heavy, good-quality wood and original hardware that can be rebuilt and rehung for $450 to $900. Replacement only makes sense if the gate structure itself has rotted through in multiple places or the posts are so deteriorated that resetting them means essentially rebuilding from the ground up. We’ll give you an honest read with numbers either way, and the price is in writing before you decide. Call (940) 412-7340 for a free estimate on your specific gate.
When your gate stops working in Clovis, don’t wait until it’s wedged open. Call (940) 412-7340 and talk to a real person who can schedule your repair, quote your price in writing, and back it with the Kingswell Guarantee. If it fails within 365 days, we come back and fix it at no charge. That’s the entire deal.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Clovis since 2008.