Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Irving
Gate repair in Irving usually runs $160-$480 for a service call that ends in a fixed gate, and most jobs are done same day once our truck rolls. If you live in Valley Ranch, Las Colinas, or older central Irving, you’re dealing with a specific set of problems: HOA master codes, climbing clay that tilts posts, and gate systems from the 1980s and ’90s that are all wearing out on the same schedule. Our Gate Repair team works those neighborhoods every week. We know the wiring, we know the property managers, and we answer the phone around the clock at (940) 412-7340.
Why Portcullis Gate Repair Is Irving’s Preferred Gate Repair Company
Portcullis Gate Repair is an independently owned Kingswell company, and since 2008 we’ve held every job to the same four Kingswell Guarantee promises: a written price before any work starts, a real arrival window, a clean job site, and a written guarantee on the repair. In Irving, that guarantee matters more than most places, because so much of the work involves HOA-governed gates where the board needs documentation, the residents need access, and nobody wants a third callback.
Dean Prescott runs our Irving service area, and our technicians are background-checked and arrive in uniform. They carry parts for Viking, Ghost Controls, and DoorKing operators in the truck, which means fewer trips back to the supply yard and faster completion on Irving’s slide gates and swing arms. When an HOA property manager calls about a dead gate on a private lane, the person on the other end of the line is a live human being, not a voicemail tree, at (940) 412-7340.
We serve all of Irving, from the ranch homes off Belt Line Road to the gated entries along MacArthur Boulevard and the corporate campuses in Las Colinas. Dispatch and scheduling are coordinated from the brand’s Dallas-Fort Worth office; crews serve Irving locally. Every repair invoice carries the 365-Day Done Right Promise in writing: if the repair fails inside a year, we come back and fix it at no charge.
Wrought Iron Gate Repair in Irving
Wrought iron gate repair in Irving is our most common residential call, and the typical job involves a sagging leaf, a snapped hinge weld, or a lock that no longer seats because the post has moved with the Blackland Prairie clay underneath it. These ornamental gates were built into the covenants of Valley Ranch and Las Colinas from the start, and many of them are now 35 to 40 years old. The metalwork is usually sound; the footings and hardware are what fail. A weld-and-realign repair on a single wrought iron drive gate in Irving runs $220-$410, including parts and labor. A full leaf removal, rebuild, and rehang starts around $500 and goes up from there.
Post footings and hinge realignment
Irving sits on vertisol clay, which expands when wet and shrinks when dry. Over a few seasons, that movement tilts hinge posts enough that the gate leaf catches the ground or the latch misses the striker. We don’t just grind a half-inch off the bottom of the leave; we expose and re-set the post footing so the gate stays level.
Weld and rust repair
Humidity, irrigation overspray, and decades of Texas sun take their toll on ornamental iron. Surface rust on the bottom rails of a wrought iron gate in Irving is usually repairable in place with grinding, sealing, and repainting. Structural rust through a hinge barrel or a top rail requires cutting out the section and welding in new steel, then matching the finish as closely as the original powder coat allows. That work typically runs $180-$350 per repair point.
Metal Gate Repair in Irving
Metal gate repair in Irving covers everything from lightweight aluminum pedestrian gates to heavy steel slide gates across driveway entrances. The repair strategy depends on the metal and the movement system. Aluminum gates usually fail at the welds or the bottom hinge; they’re light but brittle, and a good repair means cleaning the joint fully before welding rather than laying new material over oxidized metal. Steel slide gates in Irving’s HOA communities fail differently, mostly in the drive system, the track, or the wheels. A typical metal gate repair runs $180-$420; a cantilever slide gate that’s jumped its track may cost more once we assess the rollers and the rack.
Slide gate track and roller work
Slide gates make sense in Irving’s tighter right-of-way situations, where a swing gate would arc into a neighbor’s driveway or into parked cars. But slide gate systems are demanding. A build-up of clay or debris on the track, a worn roller bearing, or a misaligned rack gear will make the gate drag and strain the operator. We replace rollers, re-bed the track, and correct the rack alignment so the motor isn’t fighting the gate on every cycle.
Pedestrian gate repair
A failing pedestrian gate in a shared HOA common area creates a different problem: residents prop it open with a rock or a brick, and then the self-closing hinge never gets a chance to seat. We repair and replace commercial self-closing hinges, magnetic locks, and push-paddle hardware so the gate latches itself the way the HOA intended. Pedestrian metal gate repairs in Irving typically run $110-$260.
Trusted Brands We Service in Irving
We have trained service experience on nine gate-operator brands, and in Irving we see an unusually high concentration of Viking, Ghost Controls, and DoorKing units, especially in the Valley Ranch and Las Colinas neighborhoods built between 1978 and 1995. We carry common Viking control boards, Ghost Controls receiver modules, and DoorKing loop detector parts in our local inventory, so many repairs happen in one visit. When a gate’s operator predates modern color-coded wiring, our technicians pull the original connection diagrams and work from those, rather than guessing at the run.
Common Gate Repair Problems We See in Irving Homes
- Developer-era operator lockouts. Many Las Colinas and Valley Ranch homeowners’ associations lost the master codes and wiring diagrams years ago. Our technicians know these systems well enough to reverse-engineer the original connections without tripping the entrapment protection circuit.
- Clay-heaved post footings. Irving’s vertisol clay swells and shrinks enough through spring rains and August heat to tilt gate posts by a full inch or more. We re-set and re-pour the footing, which is the only repair that holds.
- Tight shared driveways. Older central Irving neighborhoods have narrow rights of way where a swing gate cannot clear a parked car. We retrofit slide gates into these tight spaces, often fabricating a custom track bed within the existing curb line.
- Storm-damaged operators. The February 2021 freeze cracked hydraulic operators and snapped low-voltage wiring across Irving. Gate systems not rated for sustained sub-freezing temperatures need thermal protection retrofits and replacement seals. We check for that every winter.
Pricing for Gate Repair in Irving, TX
Here’s what gate repair costs in Irving, in plain numbers. A basic hinge and latch adjustment runs $140-$220. Replacing a failed safety photocell or loop detector runs $180-$280. A full slide-gate roller and rack repair runs $280-$520. Weld repairs start at $160 per point and typical jobs run $220-$410. A complete operator replacement, including removal of the old Viking, Ghost Controls, or DoorKing unit and installation of the new one, runs $650-$1,400 depending on horsepower and access. The price you get is written down before any work starts, and it covers parts and labor. Call (940) 412-7340 for a free estimate, and you’ll see the same number on the final invoice.
We Also Serve Cities Near Irving
If you’re just outside Irving, our crew also covers Dallas, Balch Springs, Hutchins, and Mesquite. The same written pricing, background-checked technicians, and 365-Day Done Right Promise apply to every job in every one of those cities.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Irving
Because those communities were built mostly between 1978 and 1995, and the original Linear and Elite gate operators installed during that build-out are now hitting end-of-life on the same schedule. When one slide gate on a private lane fails, the one at the other end is rarely far behind. The result is a wave of simultaneous service calls within a single HOA, often requiring us to coordinate with the property manager on access codes and resident traffic flow while we work.
Yes. We routinely work from the developer-era wiring schematics that predate modern color-coding standards, and when those aren’t available, our technicians trace each circuit by function. The challenge in Las Colinas and Valley Ranch is that community-wide master codes often lock out the operator itself, so we coordinate with the HOA board or the property manager to obtain access before we start. That coordination time is built into our written estimate, not added on after the fact. Call (940) 412-7340 and we’ll start working through it with your board directly.
Because the problem is usually under the track, not in it. Irving’s Blackland Prairie clay expands and contracts enough to heave the post footings and twist the track bed, so adjusting the roller height or lubricating the wheels only masks the misalignment for a few weeks. The permanent repair is to re-set the footing and lay the track back in on a stable bed, then align the rack so the operator isn’t straining against the drift.
Yes, and that’s one of the reasons we’re so familiar with Irving’s older neighborhoods. In a narrow right of way, a swing gate would arc across a neighbor’s driveway or into parked cars, so we retrofit a slide gate instead. That means fabricating a track bed within the existing curb line, repositioning the operator, and wiring the safety edges and photocells so the gate can’t close on a vehicle that’s only half out of the driveway. These retrofits run higher than a straightforward repair, typically $800-$1,600, and every dollar is on the written estimate before the first post hole is dug.
Yes. Any automated gate in Irving must comply with UL 325 entrapment protection standards, which means functioning safety photocells, edge sensors, and a properly rated operator. When a gate is repaired or replaced, the safety system has to be tested and documented. We handle that on every job and include the test results with the written Kingswell Guarantee. If a gate in your HOA has been running without working sensors, call (940) 412-7340 and we’ll get it corrected before someone gets hurt.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Irving since 2008.