Gate Repair in Lakeway - On-Site in 60 Minutes, Fixed the Same Day

Fast, Reliable Gate Repair Across Lakeway

Most gate repairs in Lakeway come down to one of three things: a worn operator gearbox, a post that’s moved in the limestone, or a sensor choked with cedar pollen. We fix all three, usually in one visit. Portcullis Gate Repair has been serving the Lake Travis area since 2008, and our technicians know the difference between a gate failing from age and one failing from site conditions specific to this terrain. If your gate won’t open, drags on the ground, or reverses for no reason, call (940) 412-7340 and a live person answers, day or night.

Call (940) 412-7340

Why Portcullis Gate Repair Is Lakeway’s Preferred Gate Repair Company

Lakeway homeowners don’t call us because their gate is a minor annoyance. They call because the gate stopped working, the driveway is blocked, and the last company they tried either didn’t show or fixed the symptom and not the cause. We hear that story often enough that we built our whole process around not being that company.

Every job starts with a written price before a single bolt is turned. Not an estimate range, not a verbal ballpark. A written number you approve first. That’s one of the four Kingswell Guarantee promises that bind every independently owned Portcullis location, and Dean Prescott holds our Lakeway-area crews to it on every ticket.

Our technicians arrive in uniform, background-checked, and familiar with Lakeway-specific gate problems before they ever pull into the driveway. They know that a gate on a Rough Hollow slope behaves differently than one on a flat lot in Lakeway proper. They know cedar pollen season blocks photo-eyes. They know bedrock anchoring is often the only option. That local knowledge means faster diagnosis and fewer return trips.

And if the repair fails inside the 365-day guarantee period, we come back and fix it at no charge. That’s the 365-Day Done Right Promise, and it’s stamped in writing on every invoice. No fine print, no prorating.

Sliding Gate Repair in Lakeway

Sliding gate repair in Lakeway usually means one of two jobs: a cantilever or V-track slide gate on a wide driveway, or a commercial-grade slide gate at an HOA entrance in a community like Rough Hollow. Both require the operator, the rack or chain, and the track or rollers to work as one system. When the limestone shifts, when the rollers wear, or when the rack teeth strip, the whole gate starts grinding, stalling, or refusing to move at all.

The fix starts with finding why the gate is binding. On Lakeway’s sloped driveways, that’s often a post footing that cracked and let the gate sag onto the rack and pinion. Once the drag is corrected, we rebuild or replace the operator, re-set the travel limits, and re-align the safety photocells.

Operator Replacement and Rack Repair

When the operator gearbox is stripped or the rack teeth are worn past engagement, swapping parts without fixing alignment only buys you a few months. We replace the rack section or gear train, re-anchor or shim the mounting plate to the post, and set the force limits so the motor isn’t fighting the gate on every cycle.

Track, Roller, and Post Re-anchoring

Sliding gates on Lakeway’s grade changes often bind because the concrete pad or the post has moved, not because the motor failed. In limestone, the fix isn’t a longer bolt. It’s core-drilling and anchoring into bedrock, then re-leveling the track or roller assembly to match the gate’s true travel line.

Sliding gate repair in Lakeway typically runs $320-$680 for roller, track, and limit-switch work, and $540-$1,150 when the operator motor or gearbox replacement is included. The written quote is yours before we start.

Wrought Iron Gate Repair in Lakeway

Wrought iron gate repair in Lakeway usually means fixing what two decades of Hill Country weather has done to ornamental steel. The gates themselves are often salvageable. The hinges, posts, and operator arms are usually not. Lakeway was developed heavily from the 1970s through the 2000s as a planned upscale community, and many of the custom iron driveway gates installed in that era are now showing exactly the failures you’d expect: corroded hinge pins, sagging corners, cracked welds at the stile joints, and operators that have been fighting the extra friction for years.

Hinge and Post Restoration

A wrought iron gate that drags is almost always a hinge problem first. We cut out the old hinge barrels, weld in new pins and bushings, and reinforce the post mount. On Lakeway’s bedrock, that means the post anchor is often core-drilled rather than re-set in soil.

Weld and Rust Repair

Rust at the bottom rail is structural, not cosmetic, once it’s eaten through the tube wall. We cut back to clean steel, sleeve or splice the section, and re-weld with full penetration. Then we coat and paint to match. If the gate is too far gone, we’ll tell you straight and quote a replacement section instead.

Wrought iron gate repair in Lakeway runs $280-$780 for typical hinge, weld, and realignment work. Full post replacement or re-anchoring into bedrock adds $400-$900 depending on the post size and drill depth.

Trusted Brands We Service in Lakeway

Our technicians carry service stock for the operators most common on Lakeway properties: LiftMaster for residential swing and slide gates, DoorKing for HOA slide entrances, and Linear and Viking for heavier commercial and estate applications. We also service FAAC, BFT, Ghost Controls, Elite, and Mighty Mule. Because we stock boards, limit switches, and gear kits locally, many Lakeway repairs are completed the same visit instead of waiting on a shipped part.

Common Gate Repair Problems We See in Lakeway Homes

• Cedar pollen false obstructions: From December through February, Ashe juniper pollen clogs photo-eye lenses and coats operator vents across Lakeway. Gates stop mid-travel and reverse for no apparent reason. Cleaning and resealing the sensor housings fixes most cases.
• Summer thermal cutoffs: West-facing gates on unshaded limestone driveways bake in the afternoon heat. Operators trip their internal thermal protection and leave the gate stuck. A ventilation fix and proper force settings usually prevent repeat trips.
• Bedrock post failures: Standard post footings won’t hold in Lakeway’s limestone. Posts that were soil-set on sloped lots move over time, pulling the gate out of square. The permanent fix is core-drilling and anchoring directly into rock.
• Lake-wind arm bending: Gates with a Lake Travis-facing exposure catch updrafts between the bluffs. Solid-panel gates act like sails, bending operator arms and stripping gear teeth. Slatted or open-frame panels are the practical long-term answer.

Pricing for Gate Repair in Lakeway, TX

We Also Serve Cities Near Lakeway

While this page covers Gate Repair in Lakeway specifically, our crews also serve customers across the wider Central Texas region, including Houston, San Antonio, Dallas, and Fort Worth. The same Kingswell Guarantee applies on every job, in every market: written price first, real arrival window, clean job site, and a written guarantee on the repair.

FAQs About Gate Repair in Lakeway