Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Sunnyvale
A broken gate in Sunnyvale usually means one of two things: a swing gate that won’t close on a long driveway off the Juniper Serra corridor, or a slide gate binding on a worn rack and pinion. Most repairs we handle run $220-$540 for hinge and post work, $340-$780 for operator and control-board replacement, and $180-$420 for sensor and loop-detector fixes. We quote that price in writing before any work starts, and we arrive in the window we gave you. If you’re standing in your driveway right now looking at a gate that won’t move, call (940) 412-7340 and a live person will answer, day or night.
We’re not a call center. We’re a Kingswell company, and our technicians know Sunnyvale’s acreage entrances, its ranch parcels, and the particular way a 200-foot driveway strains a gate opener that was sized for a suburban lot.
Why Portcullis Gate Repair Is Sunnyvale’s Preferred Gate Repair Company
Sunnyvale’s southern edge is a different animal from the tech campuses up north. Where Cupertino and Santa Clara lots crowd the street, Sunnyvale still has working horse properties and acreage where the gate is a hundred yards from the house. That changes everything about how a gate gets powered, how it’s braced, and how fast it needs to respond when livestock is involved. We’ve worked those entrances. We know what a South Bay clay footing does to a hinge post after five wet winters, and we know when a solar array is undersized for the span it’s trying to move.
Every tech who shows up at your Sunnyvale gate is background-checked and in uniform. You’ll know their name before the truck rolls up. The price you approved is the price you pay. And if the repair fails inside 365 days, we come back and fix it at no charge under the 365-Day Done Right Promise. That’s the Kingswell Guarantee, and it’s stamped on every invoice we leave behind.
Dean Prescott, who runs our operation here, has built the team around a simple rule: answer the phone, show up on time, and put the guarantee in writing. That’s why Sunnyvale homeowners with acreage entrances keep our number in their phone. Call (940) 412-7340 and you’ll reach a person, not a voicemail tree.
Iron Gate Repair in Sunnyvale
Iron gate repair in Sunnyvale usually comes down to three jobs: rehanging a sagging leaf that’s pulled away from the hinge post, cutting out and replacing rusted bottom rails where they meet damp soil, and welding cracked pickets or frame joints back to square. On properties off the Juniper Serra corridor, we also see a lot of wide double swing gates that were built heavy but never properly braced for their span. The gate itself gets reinforced, but the post was never fixed, and the whole thing binds within a year.
A typical iron gate hinge and post repair in Sunnyvale runs $220-$420 per gate leaf, including re-leveling and re-shimming the hinge post. Full bottom-rail replacement with rust repair runs $340-$680 depending on how far the corrosion has climbed. Weld repairs on cracked frames are $160-$300 per section. We quote all of it before we strike an arc.
Post Replacement and Re-Setting
When a hinge post leans even half an inch, the gate leaf drops, the latch misses, and the operator strains against a load it wasn’t built for. We dig out the old footing, pour a new one, and re-hang the leaf so it swings clean. On Sunnyvale’s clay soil, we set posts deeper than the original installer did, because we know what the wet-dry cycle does to shallow footings.
Weld Repair and Frame Straightening
A cracked weld at the hinge side of an iron gate is a structural problem, not a cosmetic one. We grind back to clean metal, weld the joint, and reinforce the area so it doesn’t crack again at the same spot. If the frame has twisted out of plane, we straighten it before it starts eating operator gears.
Sliding Gate Repair in Sunnyvale
Sliding gate repair in Sunnyvale is the job we see most often on long-driveway properties where a cantilever or V-track slide gate covers a 16- to 24-foot opening. The typical failure is the rack and pinion, the toothed rail and drive gear that moves the gate, worn unevenly because the gate was heavier than the operator was rated for. You’ll hear it before you see it: a grinding, jerky motion, or a gate that stops partway and reverses.
A rack and pinion replacement on a residential slide gate in Sunnyvale runs $280-$540 including new hardware and re-leveling the track. V-track wheel and guide replacement runs $180-$380 per set. Full operator replacement for a heavy slide gate starts around $540 and goes up with the gate’s weight and span. We price it in writing before we touch a bolt.
Track Alignment and Wheel Replacement
When a slide gate runs off its V-track or grinds along the rail, it’s usually the wheels, the track alignment, or both. We replace worn wheels, true the track, and reset the gate so it travels evenly without fighting the operator. On Sunnyvale acreage, gravel and decomposed granite work their way into the track, so we also clear and re-grade the travel path.
Rack and Pinion Service
The rack is the steel channel bolted to the gate, and the pinion is the gear on the operator that drives it. When the gate is too heavy for the operator, the pinion chews the rack. We replace the worn section, re-level the rack, and size the operator to the actual gate weight, so the new parts don’t wear out the same way.
Trusted Brands We Service in Sunnyvale
We service LiftMaster, Linear, Viking, Ghost Controls, DoorKing, and the other major operator brands, and we keep common parts on the truck for Sunnyvale’s most popular units. If you’ve got a Linear operator on a solar bank off the Juniper Serra corridor, or a Viking unit running an HOA entrance, the tech who shows up already knows the system. That means fewer return trips and a repair that gets quoted right the first time. Call (940) 412-7340 and tell us what’s on your gate, we’ll bring what it needs.
Common Gate Repair Problems We See in Sunnyvale Homes
- Undersized solar arrays on long-driveway gates. South of the tech campuses, a gate 200 feet from the nearest pedestal often runs on solar with a battery bank that’s too small for the span. The operator starves for torque, the gate drifts or stops mid-cycle, and the fix is a bigger panel and a properly sized battery. This is the single most common call we get from Sunnyvale acreage properties.
- Sagging wide farm gates binding at the hinge post. Someone reinforces the gate panel but never fixes the post footing, so the whole thing drops and binds. In South Bay clay, shallow footings heave and settle, and the gate needs re-hanging on a properly set post, not just new hinges.
- Safety photocells tripped by livestock and vehicle traffic. On ranch entrances, horses, dogs, and slow-moving trailers break the photocell beam mid-cycle, and the gate reverses or stops. We reposition the eyes, add guards, or switch to a loop-detector layout that reads vehicles but ignores animals crossing at the wrong height.
- Rack and pinion wear on operators sized for residential gates. A wide double swing or heavy slide gate on an operator built for a lighter load wears the rack unevenly, and the gate starts jerking. We re-level the rack, replace the worn section, and match the operator to the real weight of the gate.
Pricing for Gate Repair in Sunnyvale, TX
Here are the numbers we actually quote in Sunnyvale. Hinge and post repair: $220-$420 per leaf. Rack and pinion replacement: $280-$540. Operator replacement: $340-$780 depending on the unit and the gate’s weight. Sensor and loop-detector fixes: $180-$420. Weld repair: $160-$300 per section. Solar array and battery-bank upgrades for long-driveway gates: $420-$900 installed. The price is written down and agreed before any work starts, and it doesn’t change at the door. If you want an exact number for your gate, call (940) 412-7340 and we’ll give you a free estimate over the phone, then back it with a written quote on site.
We Also Serve Cities Near Sunnyvale
Our crews cover Sunnyvale and the surrounding communities, including Gate Repair work in Mesquite, Balch Springs, Forney, and Rowlett. If you’re just outside the Sunnyvale line on an acreage parcel, we’ll still come out. The same written price and 365-Day Done Right Promise applies everywhere we roll a truck.
Serving Sunnyvale, TX - Our Local Coverage Area
We’re based in the Sunnyvale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Sunnyvale
Yes, if the solar array and battery bank are sized correctly. A 200-foot driveway means the operator cycles longer and works harder, so it needs more panel wattage and more stored amp-hours than a suburban gate. Most failures we see on Sunnyvale acreage are undersized systems, not solar itself. We spec the panel and battery to the gate’s weight and cycle count, and we can upgrade an existing system. Call (940) 412-7340 for a load calculation and a written quote.
Because the hinge post is moving, not the hinges. In Sunnyvale’s clay soil, shallow footings settle and heave with the wet-dry cycle, and the post tilts. Tightening hinges on a leaning post just re-clamps the gate at the wrong angle. The fix is to dig out the footing, set the post deeper, and re-hang the leaf. That runs $220-$420 per leaf in Sunnyvale, and we guarantee it in writing for 365 days.
Raise the photocells above the animal’s height and add guards so a horse’s shoulder or a dog’s tail can’t break the beam. On ranch entrances we often switch the primary detection to a loop detector in the driveway, which reads the metal mass of a vehicle and ignores animals entirely. This is a standard fix on Sunnyvale horse properties, and it runs $180-$420 with parts and programming. Call (940) 412-7340 and we’ll walk the site and give you a written price.
Water got into the keypad housing, or the wiring to the control board corroded. Sunnyvale’s November through April rains, combined with morning condensation on north- and east-facing gates, are hard on exposed keypad seals. The fix is usually a new sealed keypad and re-terminated wiring at the control board, which runs $140-$280. If the board itself is damaged, that adds to the job, and we’ll show you the part before we replace it.
Yes. Entrapment protection is required on any automated gate, private driveway or not, and it’s a genuine safety issue on ranch entrances where livestock, kids, and equipment share the same opening. We install and calibrate photocells, edge sensors, and loop detectors so the gate reverses before it hurts anyone or anything. It’s part of every new operator install we do in Sunnyvale, and we can retrofit older gates that were installed without it.
Call Portcullis Gate Repair in Sunnyvale
If your gate binds, drifts, grinds, or won’t open at all, call (940) 412-7340. A live person answers, day or night. We’ll give you a real arrival window, a written price before any work starts, and a 365-day written guarantee on the repair. That’s the Kingswell Way. Gate Repair in Sunnyvale doesn’t have to mean waiting three days for a callback. It means calling us, telling us what’s wrong, and getting it fixed.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Sunnyvale and surrounding communities since 2008.