Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Lomita, CA
Gate repair in Lomita means working on hardware that has spent decades in salt-laden air from San Pedro Harbor, only a few miles south. We see rusted hinges, seized rollers, and corroded gate frames far more often here than in Torrance or Gardena. Most Lomita homes are post-WWII single-family properties with original mid-century steel gates, and many still have the original concrete or block-masonry gate posts. Those posts have settled and cracked over sixty-plus years. That changes how we approach every job. If your gate is dragging, grinding, or refusing to open, call us at (940) 412-7340 and we will talk through what is actually going on.
Why Lomita Homes Are Different
The marine layer that settles over Lomita keeps salt moisture in contact with metal gate components year-round, even through dry spells. There is no dry season reprieve for uncoated iron or steel. Hinges, tension springs, and tracks that would last twenty years a few miles inland often fail in half that time in Lomita’s older blocks. On 1950s and 1960s decorative wrought iron driveway gates, we regularly find corrosion that has worked into the tubular sections from the inside out. Welding is not always cost-effective when the metal has thinned that far. In those cases, full replacement is the honest recommendation, and it is a conversation we have more often in Lomita than almost anywhere else in the South Bay.
The housing stock compounds the problem. Homes built here between the late 1940s and early 1960s often have original poured-concrete gate posts that have shifted or cracked over six-plus decades. Before we can hang a new gate panel or mount a new operator, we commonly have to address the pillar first. A gate company that ignores a settled post and bolts a new opener onto it will be back in six months, replacing the same parts. We would rather tell you that up front and fix the column before the gate goes on.
Our Main Lomita Services
The two calls we field most from Lomita homeowners are gates that have stopped moving and gates that never fit the property in the first place. Each service has its own page with pricing and details.
Gate Repair in Lomita
Most Lomita repair calls start with a gate dragging on the ground, a hinge that has sagged, or a motor that hums but will not move the leaf. The salt-harbor air is almost always part of the story. We inspect the hardware, the posts, and the operator before quoting anything. Read the full breakdown at Gate Repair in Lomita.
Gate Installation in Lomita
Installing a new gate in Lomita usually begins with the posts. On older properties, the existing pillars may have shifted enough that the new gate would never hang square. We handle the post work, the gate build or order, and the operator wiring. Prices for a new installation depend heavily on material and post condition. See Gate Installation in Lomita for the numbers.
Electric Gate Repair in Lomita
Electric gate systems near the harbor fail most often at the circuit board, the limit switches, or the actuator, which is the motorized arm that actually pushes the gate open. Salt corrosion gets into the control box wiring faster than people expect, even when the box is sealed. We carry parts for Viking, DoorKing, and LiftMaster systems among others. Details are on the Electric Gate Repair in Lomita page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Lomita
We service the operator brands most common on Lomita driveways, including Viking, DoorKing, Elite, and Ghost Controls. We stock control boards, remotes, and safety-edge parts for those systems locally, so most repairs can be completed in a single visit. See the full list on our brands page.
Pricing for Gate Company in Lomita, CA
| Service | Typical range in Lomita |
|---|---|
| Hinge replacement (pair) | $180-$420 |
| Roller replacement | $150-$350 |
| Track repair or realignment | $200-$480 |
| Gate frame welding repair | $180-$450 |
| Control board replacement | $350-$850 |
| Actuator replacement (swing gate) | $650-$1,300 |
| Gate operator replacement (full unit) | $900-$2,200 |
| New gate installation (residential, single swing) | $1,800-$4,500 |
| Electric gate conversion (manual to automated) | $2,500-$6,000 |
| Safety sensor or photo-eye replacement | $180-$400 |
Lomita prices tend toward the upper middle of those ranges when the gate has been exposed to harbor air for decades. If the posts need rebuilding or the frame has rusted through in the tubular sections, that adds material and labor. Every job gets a written price before any work starts, and that price does not change at the door.
Neighborhoods We Serve in Lomita
We work across all of Lomita, from the residential blocks north of Pacific Coast Highway to the streets near Lomita Park. We usually reach a Lomita address within an hour or two of the call, depending on the day’s schedule.
- Downtown Lomita
- Lomita Pines
- Harbor Hills
- San Pedro Hills
- West Lomita
Service Area – Cities Near Lomita
We also serve nearby cities across the South Bay and beyond. If you are in Torrance, CA, Carson, CA, or Rancho Palos Verdes, CA, the same pricing and guarantee apply. We also cover Lakewood, WA for customers in the Pacific Northwest.
Serving Lomita, CA - Our Local Coverage Area
We’re based in the Lomita area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lomita
Most days we can have a technician at a Lomita address within an hour or two. Calls go to a live person, not a voicemail tree, and you will get a real arrival window before the truck leaves.
Most gate repairs and replacements do not require a permit, but new gate installations with footings or electrical work can. We will check the current Lomita requirements on your job and tell you before we start.
Yes. We serve every neighborhood in Lomita, from the older blocks near the city center to the hillside streets near San Pedro Hills. Scheduling is coordinated from our Los Angeles office, with crews dispatched to Lomita daily.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lomita Customers Say
"Gate wouldn't respond to the remote or the keypad. Turned out to be the control board. They had the part and swapped it the same visit. Quoted it first, no surprises."
- Everett Shaw"Electric gate kept doing its own thing, opening at random. The tech found a shorted sensor and a worn board, fixed both, and showed me the old parts. Price was what he quoted on the phone."
- Cassandra Pike"Installed a new gate for us after the old wooden one rotted out. Clean work, showed up on time both days, and the written price didn't change. It swings perfectly."
- Donna Kirkpatrick