Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Miami Shores, FL
Gate repair in Miami Shores most often comes down to one of three calls: a 1930s wrought-iron gate that won’t swing, an electric operator that stopped responding, or a homeowner who wants a new gate and just learned the village’s historic preservation rules complicate things. Our crews work on all three, and we know before we arrive that the job will probably involve salt corrosion, coral-rock pillars, and hardware you can’t order from a catalog. If your gate is stuck, call (940) 412-7340 and a live person answers.
Why Miami Shores Homes Are Different
Miami Shores sits less than a mile from Biscayne Bay, and that single fact shapes more of our work here than almost anything else. The salt-laden air off the bay accelerates oxidation on gate hinges, springs, and automated operators. Equipment that might run 10-12 years inland often corrodes to failure within 5-7 years in Miami Shores. We see it constantly: a hinge pin that looks fine from the outside but has rusted through inside the barrel, or an operator circuit board showing green corrosion across the terminals.
The housing stock adds a second layer. Miami Shores is dominated by 1920s-1940s Mediterranean Revival, Mission, and Art Deco homes, and most still have their original decorative wrought-iron gates mounted between stucco or coral-rock masonry pilasters. Those gates were built in place, not bolted to a steel frame, and the scrollwork and finial details are completely non-stock. There is no catalog part that matches a 1930s Miami Shores gate. A repair call here quietly becomes a custom fabrication job more often than homeowners expect. The home page explains more about how we approach that kind of work.
And in the village’s Historic Preservation District, which covers hundreds of these vintage properties, visible gate modifications can require review by the Miami Shores Architectural and Historic Preservation Board before any work proceeds. We handle that reality as part of the estimate, not as a surprise after the gate is already off its hinges.
Our Main Miami Shores Services
Most Miami Shores homeowners reach out to us for one of these three services, each with its own dedicated page covering what to expect and what it costs.
Gate Repair in Miami Shores
A sagging gate, a bent hinge, a latch that no longer catches, or a broken weld on an original wrought-iron panel. In Miami Shores, repairs on older gates mean matching existing metalwork so the fix doesn’t stand out. We assess what can be restored versus what needs fabrication, and we put the price in writing before any work begins. Full details are on the Gate Repair in Miami Shores page.
Gate Installation in Miami Shores
New gate installations in the village nearly always require coordinating with the Historic Preservation District review process if the property is within its boundaries. We walk through what needs approval, what material and style changes trigger review, and what can be replaced in kind without a hearing. Then we build and hang the gate to match the home’s architecture. Read more at Gate Installation in Miami Shores.
Electric Gate Repair in Miami Shores
Salt air is hardest on electric components, and we regularly replace corroded circuit boards, limit switches, and actuators – the motorized arm that physically pushes the gate open – in Miami Shores. Any new operator we install carries Miami-Dade NOA certification for hurricane wind-load compliance. You’ll find specifics at Electric Gate Repair in Miami Shores.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Miami Shores
We service and stock parts for most major gate-operator systems, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because Miami Shores jobs skew toward custom repair, we carry replacement boards and common mechanical parts, but scrollwork and finial matching is always custom. Check our brands page for the full list.
Pricing for Gate Company in Miami Shores, FL
| Service | Typical range in Miami Shores |
|---|---|
| Gate repair – standard swing or slide | $280-$680 |
| Hinge replacement on wrought-iron gate | $240-$520 |
| Weld repair on iron gate | $180-$460 |
| Gate actuator replacement | $560-$1,220 |
| Control board replacement | $360-$940 |
| Gate opener motor replacement | $560-$1,400 |
| Full gate replacement – standard steel | $1,100-$3,900 |
| Custom fabricated iron gate | $2,700-$9,500 |
| Electric gate installation (single swing) | $3,800-$8,900 |
| Electric gate installation (slide) | $4,800-$11,600 |
Prices in Miami Shores run higher than inland Miami-Dade because of the custom fabrication work and slower, more careful installation around historic masonry. Whatever the number is, you get it in writing before we turn a single bolt, and it will not change on you at the door.
Neighborhoods We Serve in Miami Shores
We work across the whole village, including historic-district streets and the newer sections near the bay. Our Miami Shores response is typically same-day or next-day for repair calls, depending on the schedule.
- Historic Preservation District
- Biscayne Park-adjacent streets
- Northeast Miami Shores
- Southeast Miami Shores near NE 96th Street
- North Miami Shores along NE 107th Street
Service Area – Cities Near Miami Shores
Beyond Miami Shores, we also run jobs in the larger South Florida metro and elsewhere in the state. If you’re in a neighboring city, you can find your local service page through Miami, FL, and if you’re upstate, check Jacksonville, FL, Tampa, FL, or Orlando, FL. Dispatch for Miami Shores is coordinated from our Miami (South FL) office.
Serving Miami Shores, FL - Our Local Coverage Area
We’re based in the Miami Shores area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Miami Shores
If your home is within the village’s Historic Preservation District and the repair changes the gate’s visible appearance – like swapping a wrought-iron design for a modern panel – approval may be required. In-kind repairs to existing hardware generally are not affected. We flag this during the estimate so there are no surprises.
Most repair calls in Miami Shores get same-day or next-day scheduling. Installation and custom fabrication jobs are measured and scheduled after the written estimate. Call (940) 412-7340 and a live person answers around the clock.
In most cases, yes, through custom fabrication and ornamental welding rather than catalog parts. We work from the existing scrollwork and finials to keep the replacement visually consistent with the home’s original architecture. The price is written and agreed before fabrication begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Miami Shores Customers Say
"Electric gate kept doing its own thing, opening at random. The tech found a shorted sensor and a worn board, fixed both, and showed me the old parts. Price was what he quoted on the phone."
- Cassandra Pike"Installed a new gate for us after the old wooden one rotted out. Clean work, showed up on time both days, and the written price didn't change. It swings perfectly."
- Donna Kirkpatrick"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad