Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in San Bruno, CA
Gate repair in San Bruno is its own trade, and anyone who has lived here long enough knows why: the wind. This city sits inside the San Bruno Gap, where Pacific air gets squeezed between San Bruno Mountain and the coastal hills and comes through harder than it does in Millbrae or South San Francisco. That wind tears through gates for years at a stretch. Most of the homes here were built between the 1940s and 1960s, and a lot of the original gates are still in place, now 60 or 70 years old and fighting wind, salt air, and rust every single day. We are Portcullis Gate Repair, and we handle all of it. Call (940) 412-7340 when a gate stops moving the way it should.
Why San Bruno Homes Are Different
San Bruno gets the marine layer, the salt, and the gusts all at once. That combination is rough on gate hardware in ways people don’t appreciate until a weld cracks or a motor burns out. Hinges on west-facing gates near San Bruno Mountain corrode faster than identical hardware two miles east, and swing gates catch the wind like sails. A gate that worked fine all summer can start sagging by February because the post base has been flexing in wind gusts month after month.
The housing stock adds another layer. The postwar tract homes in neighborhoods around Commodore Park and Rollingwood still have their original ornamental iron side gates in many cases, with thin-wall posts and hinges that were never built for this much repeated lateral load. The Crestmoor area is a different story, much of it rebuilt after the 2010 pipeline explosion, with newer construction and modern gate hardware. So the same city has 70-year-old wrought iron in one part and near-new automated systems in another, and each needs a different approach.
Our Main San Bruno Services
Three things keep us busy across San Bruno: repairing gates that have failed, installing new ones, and fixing the electric operators that move them.
Gate Repair in San Bruno
Most repair calls in San Bruno come down to wind fatigue. Hinges loosen, post bases crack, weld joints open up, and a gate that was never balanced for this kind of exposure starts sagging and dragging. We inspect the whole assembly, not just the part that failed, because a bent hinge is usually a symptom of something else moving where it shouldn’t. If the gate is old iron from the 1950s, we often find rust working from the inside of the post. We quote the repair in writing before any work starts, and every repair carries the 365-Day Done Right Promise. Gate Repair in San Bruno has the full breakdown of what a typical repair involves here.
Gate Installation in San Bruno
A new gate in San Bruno should not be a one-size-fits-all job. The wind load in the Gap means a swing gate needs heavier posts and better bracing than the same gate would need in Brisbane or Millbrae. We talk through the actual conditions on your street: which direction the gate faces, how exposed the opening is, and whether a slide gate with added wind bracing would hold up better over time. Then we write up the full scope and price before ordering anything. Gate Installation in San Bruno covers what a new gate project looks like start to finish.
Electric Gate Repair in San Bruno
Electric operators in San Bruno work against the wind every time they cycle, and it shows. We regularly find drive gears stripped and motors overheated on slide operators that face west toward the Gap, where the gate is pushing against steady pressure rather than moving freely. The fix is not always more horsepower; sometimes it’s adjusting the limits, bracing the gate so it tracks true, or spec’ing a higher-torque unit so the operator is not fighting the weather on every open and close. Electric Gate Repair in San Bruno goes into the specific failures we see out here.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in San Bruno
We train our technicians on nine major gate-operator brands, including Linear, Viking, Ghost Controls, and DoorKing, so the person who arrives already knows the system on your property. We stock common parts locally for faster turnaround on most San Bruno calls. See our brands for the full list.
Pricing for Gate Company in San Bruno, CA
| Service | Typical range in San Bruno |
|---|---|
| Service call and diagnosis | $75-$145 |
| Hinge replacement (standard steel) | $180-$420 per pair |
| Post repair or reinforcement | $250-$650 |
| Weld repair on steel gate frame | $150-$450 |
| Chain-link gate re-hang and alignment | $175-$390 |
| Swing gate actuator swap | $450-$950 parts and labor |
| Slide gate operator replacement | $900-$2,200 |
| Gate opener battery and backup replacement | $120-$320 |
| Limit switch and safety sensor repair | $140-$330 |
| Full gate installation (residential, single swing) | $1,800-$5,500 |
Wind exposure is the biggest price driver in San Bruno. A job that is a straight bolt-on in a sheltered neighborhood may need extra bracing, heavier hinges, or a higher-torque operator when the gate faces the Gap. Whatever the scope, you get the price in writing before a single bolt is turned, and that price is the price. No adjuster at the end of the job, no surprise line items.
Neighborhoods We Serve in San Bruno
We run calls across all of San Bruno, from the hillside streets near San Bruno Mountain down to the flats along El Camino Real. Most repair calls are scheduled for the same week, and urgent outages get priority routing when a gate will not close at all.
- Crestmoor
- Rollingwood
- Commodore Park
- Portola Highlands
- Belle Air
Service Area – Cities Near San Bruno
While this page is focused on San Bruno, our crews also cover the surrounding Peninsula. If you’re in Millbrae, CA, South San Francisco, CA, Pacifica, CA, or Brisbane, CA, the wind and salt conditions are similar enough that the same local experience applies. Each city has its own page with the details specific to that area.
Serving San Bruno, CA - Our Local Coverage Area
We’re based in the San Bruno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Bruno
Most non-emergency repairs in San Bruno are scheduled within the same week, and we give you a real arrival window before the truck rolls. If a gate is stuck open and the property cannot be secured, we treat it as a priority and route the first available technician. Call (940) 412-7340 and a live person will answer, day or night.
In San Bruno, replacing an existing gate with one of similar size and location typically does not require a permit, but adding a new automated operator or altering the post footings may. We can tell you what applies to your specific property when we come out, and we handle the paperwork side for installations when permits are required.
Yes. We work the hillside streets near San Bruno Mountain, the Crestmoor rebuild area, and the older tract neighborhoods all the way down to the flats. Parking is tight on some of the steeper streets, so we plan for that when we schedule the visit and give you a window that accounts for it.
Call Portcullis Gate Repair in San Bruno
If your gate is sagging, stuck, or making a noise it never used to make, call the number below. You’ll get a live person, a straight answer about what the repair probably costs, and a written price before any work begins. We are an independently owned Kingswell company, and every San Bruno job carries the same written guarantee: 365 days, on the invoice, with a free return visit if the repair fails inside that window. Dean Prescott leads the team, and the standard does not change from one job to the next.
Call (940) 412-7340 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Bruno Customers Say
"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti"Good repair on a sagging gate and a new hinge welded on. Took them a couple days to get the part in, but they told me that up front and it's been solid since."
- Hector Villanueva"The opener gave out and we were manually pushing the gate for a week. Portcullis got us in quick, swapped the opener, and set up the remotes for both our cars. Great to have it working again."
- Priscilla Nava