Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in San Jose, CA
Gate repair in San Jose means working with adobe clay soil that heaves every winter and shrinks every summer. That cycle tilts posts, binds gates, and creates gaps that hardware fixes alone can’t solve. Our crews work across Willow Glen, Almaden Valley, Berryessa, and the Evergreen foothills every week, and we quote the price in writing before a single bolt comes off. Whether it’s a 1940s iron swing gate on shallow footings or a modern automated slide gate, call us at (940) 412-7340 and we’ll tell you what it actually costs.
Why San Jose Homes Are Different
The valley floor under San Jose is some of the most expansive clay soil in the Bay Area. Winter rains saturate it and make it swell, which lifts and tilts gate posts. Then the long dry season from May through October shrinks the same soil back, pulling posts out of plumb in the opposite direction. The result is a two-phase annual failure cycle that most hardware-level repairs simply mask for a few months. A gate tech working here spends more time on footings and realignment than on latches and hinges.
The housing stock compounds it. Willow Glen and Rose Garden are full of 1920s and 1930s bungalows with decorative iron driveway gates that sit on footings only 18 to 24 inches deep. Those footings were never enough for the clay beneath them, and we routinely find posts that have drifted several inches out of vertical over the years. Berryessa, Alum Rock, and Blossom Valley carry the 1960s through 1980s tract homes whose original steel and wood gates are now 40 to 60 years old and overdo for replacement. Newer custom construction in Silver Creek and the Evergreen hills and Almaden Valley leans toward automated systems spec’d at build time, often app-controlled and camera-linked. San Jose isn’t a market of basic latch calls.
Our Main San Jose Services
Most San Jose homeowners call us for one of two things: a gate that won’t swing or slide properly, or an automated system that stopped responding. Each service has its own page with local detail.
Gate Repair in San Jose
Repair work in San Jose spans everything from sagging wood gates in the Rose Garden to welded steel driveway gates in Blossom Valley whose posts have been shoved out of line by clay heave. We start with the footing and the post, not the hinge, because in this city the post is almost always the root cause. We service FAAC, BFT, and Linear operators alongside plain mechanical gates. If you want the full picture of what repairs cost and what gets fixed, see Gate Repair in San Jose.
Gate Installation in San Jose
New gates in San Jose need deeper footings than the old ones had, poured for the clay, not just for the panel weight. We build and install swing and slide gates across Evergreen, Silver Creek, and Almaden Valley, and we coordinate the power run and safety edges when a client wants automation added at the same time. You’ll get measurements, material options, and a written price before any order is placed. More detail lives on the Gate Installation in San Jose page.
Electric Gate Repair in San Jose
Automated gates fail differently in San Jose than they do in sandier areas. The operator may work fine while the shifted post keeps tripping the safety edge or binding the actuator, the motorized arm that pushes the gate open. We diagnose the full loop from board to limit switch to physical alignment, and we carry parts for Viking and other major brands on the truck. For the full breakdown of how we handle automation service here, read Electric Gate Repair in San Jose.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in San Jose
Our techs carry parts and programming experience for FAAC, BFT, and Linear operators, along with Viking and several other lines you’ll see on our brands page. That means most swing and slide operator repairs in San Jose finish the same day the diagnostic happens, no waiting on a shipped part.
Pricing for Gate Company in San Jose, CA
| Service | Typical range in San Jose |
|---|---|
| Gate repair diagnostic visit with minor adjustment | $95-$195 |
| Post realignment and reset (single gate post) | $350-$700 |
| New footing pour and post set | $700-$1,600 |
| Swing gate actuator swap, parts and labor | $850-$1,700 |
| Slide gate operator replacement | $1,000-$2,800 |
| Control board replacement on operator | $500-$1,200 |
| Full gate removal and replacement | $2,500-$12,000 |
| Safety edge and photo eye replacement | $300-$750 |
Clay-soil realignment in San Jose pushes some repair bills higher than in neighboring cities because the post often has to be dug out, re-footed, and reset rather than simply shimmed. Whatever the range on the table, the number we quote you in writing before work starts is the number you pay.
Neighborhoods We Serve in San Jose
We cover the full city, from the older lots of Naglee Park up through the Evergreen foothills. Here are the areas we spend the most time in each month:
- Willow Glen
- Rose Garden
- Almaden Valley
- Silver Creek
- Berryessa
Most San Jose calls get a technician on site within one business day for non-emergency work.
Service Area – Cities Near San Jose
We dispatch crews from our San Francisco Bay Area office to San Jose and the surrounding cities. If you’re up in Milpitas, CA or over in Santa Clara, CA, we’ll route the same San Jose team your way. We also serve Sunnyvale, TX and Campbell, FL for out-of-area projects.
Serving San Jose, CA - Our Local Coverage Area
We’re based in the San Jose area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Jose
For non-emergency work, most San Jose customers get a scheduled window within one business day. Emergency calls, like a gate stuck open or a car trapped in the driveway, move to the front of the line. We give you an arrival window before the truck rolls, not after.
San Jose requires permits for some new gate installations, especially automated ones with electrical runs. Repair work on an existing gate generally doesn’t. If your HOA has architectural rules, we’ll work within them and tell you what the city actually requires before you commit.
Yes. We fix the gate itself, the operator that drives it, and the footing underneath both. That’s the important part in San Jose, where the clay soil under the post causes as many automation failures as the board or the motor ever will.
Call us at (940) 412-7340 for a free estimate. We answer live, we show up in the window we give you, and every repair carries a written guarantee.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Jose Customers Say
"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti"Good repair on a sagging gate and a new hinge welded on. Took them a couple days to get the part in, but they told me that up front and it's been solid since."
- Hector Villanueva"The opener gave out and we were manually pushing the gate for a week. Portcullis got us in quick, swapped the opener, and set up the remotes for both our cars. Great to have it working again."
- Priscilla Nava