Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Sunrise, FL
Gate repair in Sunrise comes down to one thing most other Broward cities don’t deal with at the same scale: high-cycle community entrance gates. The city’s master-planned layout, built out largely between the late 1960s and 1990s, put gated entrances on nearly every HOA community, and those original operators are now failing together. Combine that with canal-adjacent humidity and seasonal floodwater, and you get a repair market where control boards corrode early and hinges seize faster than the coast. We answer the phone around the clock at (940) 412-7340.
Why Sunrise Homes Are Different
Sunrise isn’t a city of driveway gates. It’s a city of shared entrance gates serving villa courts, townhome clusters, and single-family HOA subdivisions, most built between the 1970s and 1990s. Those gates run thousands of open-close cycles every month, which is far harder duty than a private residential gate that cycles a handful of times a day. High-cycle operation accelerates wear on swing-arm bushings, slide-gate rollers, and operator control boards.
The other factor is water. Sunrise sits at the eastern edge of the Everglades drainage basin, crisscrossed by the C-14 canal corridor and its feeder channels. Humidity here hangs higher than in coastal Broward, and during the June-September rainy season, low-mounted operator housings along canal-adjacent streets take on standing water. What we see repeatedly in communities fed by the C-14 and Plantation Acres drainage system is a failed control board inside a housing that was never moisture-sealed for this much ground water. The first call should flag it, quote a sealed enclosure or housing relocation, and stop the repeat-callback cycle before it becomes an annual board replacement.
Our Main Sunrise Services
Most calls we take from Sunrise are for community gates that won’t close, swing arms that groan or bind, and operators that trip intermittently after a rain. Here are the three services Sunrise property managers and homeowners call us for most, each with its own page:
Gate Repair in Sunrise
Most Sunrise repair calls involve a gate that’s partially working: it opens but won’t close, closes but won’t latch, or grinds through every cycle. On a community entrance gate running a few thousand cycles a month, those symptoms usually trace to worn hinge bushings, a tired swing-arm actuator, or a slide-gate roller track that’s drifted out of alignment. These are jobs we diagnose on site, quote in writing, and complete the same visit when parts are on the truck. Read the full breakdown on our Gate Repair in Sunrise page.
Gate Installation in Sunrise
Installation in Sunrise almost always means working with an HOA board or property manager, not a single homeowner. The gate has to match the community’s existing look, handle the traffic volume, and meet the city’s code requirements for safety edges and entrapment protection. We walk the board through operator selection, mounting layout, and power run before anything gets ordered, and the written price covers the full job. Details are on our Gate Installation in Sunrise page.
Electric Gate Repair in Sunrise
When the operator hums but the gate doesn’t move, or the keypad lights up but the arm won’t budge, the problem is usually electric: a control board, a limit switch, a capacitor, or a wiring fault at the operator. Sunrise’s humidity and seasonal floodwater make corroded board connections and water-damaged transformer housings the most common electric failures we see. The Electric Gate Repair in Sunrise page covers diagnostics, board replacement, and the sealed-enclosure conversation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Sunrise
Our techs carry parts for the brands Sunrise gates were built with: FAAC, BFT, Linear, and Viking. Most common board and actuator swaps are same-visit jobs because the part is already on the truck. See the full list on our brands page.
Pricing for Gate Company in Sunrise, FL
| Service | Typical range in Sunrise |
|---|---|
| Gate health inspection and written report | $99-$199 |
| Hinge replacement (per pair) | $180-$400 |
| Swing-arm actuator replacement | $450-$900 |
| Control board replacement | $250-$750 |
| Limit switch replacement | $120-$250 |
| Slide-gate roller replacement (per set) | $150-$350 |
| Keypad replacement | $150-$300 |
| Gate frame or post repair | $250-$800 |
| Full operator replacement | $1,200-$3,500 |
Prices in Sunrise trend toward the upper half of those ranges on community gates, where high cycle counts mean more worn components and the gate has to come apart carefully enough to go back together straight. Canal-adjacent properties sometimes need a sealed enclosure or housing relocation quoted into the job, which is a one-time cost that ends the annual board-replacement bill. Every price we give is written down before any work begins, and it’s the price you pay.
Neighborhoods We Serve in Sunrise
We work across all of Sunrise, from the HOA communities along the C-14 corridor to the single-family subdivisions west of the Sawgrass. Response times vary by traffic on Sunrise Boulevard and Oakland Park Boulevard, but most calls are reached the same day. Some of the neighborhoods we regularly serve:
- Plantation Acres drainage-area communities
- C-14 canal corridor HOAs
- Sunrise Lakes community entrances
- New River Estates subdivision gates
- The gated villa courts west of University Drive
Service Area – Cities Near Sunrise
Sunrise is our local base, but we also run calls across South Florida when a community gate goes down and can’t wait. Our service area includes Miami, FL, where high-rise and commercial gate systems dominate, north to Jacksonville, FL for large planned communities, and across the state to Tampa, FL and Orlando, FL for HOA and commercial work. Calls are answered by a live person 24/7, no matter which city the gate is in.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Sunrise
Most Sunrise calls are reached the same day, and emergency calls are dispatched around the clock. A community entrance gate that won’t close is a security problem, so we treat it as urgent and give you a real arrival window when you call.
Yes, and most of our Sunrise work is exactly that. We’re used to board votes, property-manager coordination, and written quotes that go into a board packet. The written price and written guarantee make that conversation easier on your end. Call (940) 412-7340 and we’ll put the quote together.
When a permit is required, we tell you up front and handle the application as part of the job. Most repairs don’t need one, but full installations and operator replacements sometimes do, and we’ll walk you through it in plain English.
If your Sunrise gate is down, binding, or acting up after a rain, call (940) 412-7340. We’ll give you a written price before anything gets taken apart, and we’ll stand behind the repair for a full year.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sunrise Customers Say
"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti"Good repair on a sagging gate and a new hinge welded on. Took them a couple days to get the part in, but they told me that up front and it's been solid since."
- Hector Villanueva