Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Whitney, NV
Whitney’s gate work follows a pattern we see every week: a 1980s wrought iron swing gate, a hinge post that the caliche soil has pushed out of plumb, and hardware that has been through forty Las Vegas summers. Most calls start with a gate that drags or won’t latch, but the actual problem is usually underground, not in the hinges. We diagnose the post first, then the hardware. If your gate is leaning, sagging, or stuck, call (940) 412-7340 and we’ll send a technician who knows what Whitney’s soil does to steel.
Why Whitney Homes Are Different
Whitney is an unincorporated Clark County CDP, which means gate permits and inspections run through the county rather than a city building department. That matters less for repairs than for new installations, where county sign-off adds a step some homeowners don’t expect. The housing stock is mostly single-story ranch tract homes from the 1970s and 1980s, and many still have their original wrought iron or galvanized chain-link gates. Those gates are now well past their design life, and because Whitney’s working-class character has meant deferred maintenance over the years, we routinely find severely corroded hinges, bent frames, and stripped latch hardware that hasn’t been touched in a decade or more.
The ground itself works against every gate here. Whitney sits on shallow caliche hardpan, the cement-like mineral layer just under the sandy topsoil. Summer heat above 110°F cycles the metal and the soil together, and posts heave noticeably between winter and August. A post that reads plumb in January can lean two or three degrees by late summer. That’s why every Whitney job starts with checking post vertical before we touch a striker plate or hinge. Put new hardware on a moved post and you’re back in the same spot within one season.
Our Main Whitney Services
Whitney homeowners call us most often for two things: gates that won’t open or close properly, and replacements for gates that have finally given out. Each service has its own Whitney page below with full pricing and detail.
Gate Repair in Whitney
Most repairs in Whitney come down to two failing points: hinge posts that have heaved out of alignment in the caliche, and latch or hinge hardware that has corroded after years of hard water and sun exposure. We check the post vertical first, because any repair is temporary if the post itself has moved. Then we address the hardware, rebuild the frame if it’s bent, and set the gate to swing or slide cleanly again. Learn more on our Gate Repair in Whitney page.
Gate Installation in Whitney
New gate work in Whitney usually means digging past the caliche layer to set posts deep enough that summer heave won’t move them. We also handle the county permit side, since Whitney runs through Clark County rather than a city building office. Whether you’re replacing a rusted chain-link gate with a steel swing gate or putting in something more substantial for a corner-lot property, we quote everything in writing first. See what a full install includes on our Gate Installation in Whitney page.
Electric Gate Repair in Whitney
Automatic operators in Whitney fail most often from two local conditions: thermal stress on circuit boards and wiring after 110°F summer afternoons, and hard-water mineral buildup on the actuator arm and pivot points. We carry service experience on FAAC, BFT, Linear, Viking, and five other major brands, so the tech who arrives already knows your system rather than learning it in your driveway. Read the full breakdown on our Electric Gate Repair in Whitney page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Whitney
We service FAAC, BFT, and Linear operators, along with Viking among others, and our techs carry common Whitney failure parts in the truck: control boards, actuator arms, remote receivers, and limit switches. That means most single-visit repairs finish the day we arrive. See our brands for the complete list.
Pricing for Gate Company in Whitney, NV
| Service | Typical range in Whitney |
|---|---|
| Gate hinge replacement | $180-$340 |
| Swing gate repair (labor only) | $150-$300 |
| Chain-link gate replacement | $250-$500 |
| Wooden gate replacement | $200-$600 |
| Gate opener installation (labor only) | $200-$500 |
| Gate opener motor replacement | $250-$450 |
| Gate opener repair (labor only) | $100-$250 |
| Full gate installation | $1,200-$4,000 |
| Operator arm replacement | $350-$800 |
| Solar gate opener installation | $250-$600 |
| Keypad installation | $150-$350 |
Whitney jobs that require digging out a heaved post, cutting through caliche for a new post base, or replacing a control board on an older operator will land toward the top of these ranges. Every price is quoted and agreed in writing before any work starts, so there’s no surprise invoice at the end.
Neighborhoods We Serve in Whitney
We work throughout Whitney and the surrounding unincorporated pockets of the Las Vegas Valley, from the older ranch-home streets near Tropicana Avenue to the newer infill lots further east. Our typical response for Whitney calls runs one to two hours for urgent repairs, and same-day visits are common on weekdays.
- Whitney proper
- Hacienda Heights
- Winchester
- Paradise Valley
- Stewart Place
Service Area – Cities Near Whitney
Beyond Whitney, our crews serve the wider Las Vegas Valley, including Las Vegas, NV, Henderson, NV, North Las Vegas, NV, and Enterprise, NV. Dispatch and scheduling are coordinated from the brand’s Las Vegas office; the technician who arrives at your Whitney home works locally. Call (940) 412-7340 and a live person picks up, any hour.
Serving Whitney, NV - Our Local Coverage Area
We’re based in the Whitney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Whitney
Yes, in most cases. Urgent gate repairs in Whitney typically see a technician within one to two hours on weekdays, and we run same-day visits when the call comes in before mid-afternoon. Call (940) 412-7340 and we’ll give you a real arrival window before the truck rolls.
Most repairs don’t. Replacing hardware, hinges, or an operator on an existing gate typically requires no county filing. New gate installations are different: Whitney is unincorporated Clark County, so installations run through county permitting rather than a city building department. We handle that paperwork on install jobs and tell you upfront if a permit applies to your project.
We do. Whitney calls get answered by a live person 24/7, including weekends and holidays, and we book Saturday visits for repairs and estimates whenever you need one. Sunday emergency calls for a gate that won’t close or secure are handled the same day in most cases.
If your Whitney gate is leaning, dragging, or dead at the opener, call (940) 412-7340. We’ll quote the repair in writing before any work begins, arrive in the window we gave you, and back the job with the 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Whitney Customers Say
"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti"Good repair on a sagging gate and a new hinge welded on. Took them a couple days to get the part in, but they told me that up front and it's been solid since."
- Hector Villanueva