Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Highland Park, TX
Highland Park homeowners call us when an automated gate stops opening or hangs mid-travel, and they usually need it fixed before the code-enforcement officer notices. Most Highland Park repair jobs run $180 to $1,600 depending on whether we’re realigning a drifted post, swapping an actuator, or rebuilding a hand-forged iron leaf. We answer the phone around the clock at (940) 412-7340 and every job gets a written price before any work starts.
Why Highland Park Homes Are Different
Highland Park sits on the Blackland Prairie’s expansive black clay, and that soil moves. Spring rains swell it; summer drought cracks it. Gate posts heave off-plumb, swing gates drift out of their travel limits, and operators that worked fine in April throw limit errors by October. We see the same post-realignment and limit-switch recalibration calls every spring and fall, and by now we plan for them.
The housing stock compounds it. Many estates date to the 1920s through 1940s, and a good number of those original gates are still hanging. Pre-1960s ironwork here is heavier gauge than anything sold today, which means a bent hinge or torn weld usually calls for specialized welding, not a bolt-on part. Post-2000 teardown rebuilds bring their own challenge: modern operators retrofitted onto ornate custom gates that were never designed for an actuator’s torque.
Highland Park code enforcement is unusually active about street-facing aesthetics. A gate left propped open or visibly damaged on a frontage can generate a city notice within days. That’s why we keep same-week emergency response and temporary cosmetic fixes available even when a matching iron component has to be ordered from a fabricator.
Our Main Highland Park Services
Most calls we get from Highland Park fall into three buckets, and each has its own page with pricing and local detail:
Gate Repair in Highland Park
This is the bulk of our work in Highland Park: gates that won’t open, gates that open halfway, gates that grind and shudder. Older custom iron often needs welding rather than part replacement, and the clay soil means we’re frequently resetting posts and recalibrating travel limits instead of just swapping a board. Dean Prescott and our technicians write the price before touching a bolt. Learn more on our Gate Repair in Highland Park page.
Gate Installation in Highland Park
New gate work in Highland Park almost always means matching the estate’s original ornamental character, and that usually involves working with bespoke fabricators rather than dropping in a stock panel. We handle the measuring, the operator selection, and the install, and we coordinate directly with the fabricator so the finished gate reads as original to the property. Details are on our Gate Installation in Highland Park page.
Electric Gate Repair in Highland Park
When the operator runs but the gate doesn’t move, or the keypad goes dead, or the safety edges won’t respond, you’re in electric gate territory. Highland Park’s mix of older retrofitted operators and newer smart systems means we diagnose everything from failed limit switches to board-level faults. High-tension springs and moving gate leaves can be dangerous, so we recommend a trained technician for any operator work. See Electric Gate Repair in Highland Park for the full breakdown.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Highland Park
Our technicians train on nine major gate-operator brands, including FAAC, BFT, and Viking, so the person who arrives already knows the system on your property. We keep common FAAC, BFT, Linear, and Viking parts stocked locally, which means many Highland Park repairs finish the same visit. See our brands for the full list.
Pricing for Gate Company in Highland Park, TX
| Service | Typical range in Highland Park |
|---|---|
| Service call and diagnosis | $75-$125 |
| Gate post realignment | $250-$600 |
| Limit switch recalibration | $150-$350 |
| Swing gate actuator replacement | $700-$1,600 |
| Operator board replacement | $350-$900 |
| Hinge welding on custom iron | $200-$550 |
| Track clearing for slide gates | $100-$250 |
| Safety edge replacement | $180-$400 |
Highland Park pricing runs higher than Dallas averages because the iron is heavier, the matching is stricter, and the city’s architectural standards don’t allow cheap stock replacements. Whatever the number, we put it in writing before any work starts, and if the repair fails inside 365 days, we come back at no charge under the 365-Day Done Right Promise.
Neighborhoods We Serve in Highland Park
We cover the full two square miles of Highland Park, from the estates along Lakeside Drive to the quieter streets near Armstrong Parkway and the approaches off Preston Road. Typical response time for a gate repair call in Highland Park is same-day or next-day depending on when you call.
- Old Highland Park
- Lakeside Drive corridor
- Bordeaux Avenue area
- Armstrong Parkway
- Preston Road approaches
Service Area – Cities Near Highland Park
Portcullis Gate Repair schedules and dispatches from the brand’s Dallas-Fort Worth office, with crews serving Highland Park locally. For readers outside Highland Park, we also serve Dallas, TX, Fort Worth, TX, and, for readers searching further afield, Houston, TX and San Antonio, FL.
Serving Highland Park, TX - Our Local Coverage Area
We’re based in the Highland Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Highland Park
Most Highland Park calls get a same-day or next-day appointment, and we work around the city’s active code enforcement: a visibly damaged street-facing gate can draw a notice within days, so we prioritize calls from Highland Park frontages and can often provide a temporary cosmetic fix while parts are ordered. Call (940) 412-7340 and a live person will schedule it.
It depends on the scope. Simple repairs and operator swaps generally don’t need one, but any structural change to the gate or posts may require approval under Highland Park’s architectural standards. We’ll tell you honestly when a permit or design review applies, and we’ll give you the written price before anything starts.
Yes. When a pre-1960s gate needs a section rebuilt, we coordinate with bespoke fabricators who can match the original hand-forged ironwork rather than swapping in a stock panel. That keeps the repair consistent with the property’s original ornamental aesthetic and with Highland Park’s street-facing standards.
If your gate isn’t working the way it should, call us at (940) 412-7340. You’ll reach a live person, get a real arrival window, and receive the price in writing before any work begins. That’s the Kingswell Guarantee on every job in Highland Park.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Highland Park Customers Say
"Installed a new gate for us after the old wooden one rotted out. Clean work, showed up on time both days, and the written price didn't change. It swings perfectly."
- Donna Kirkpatrick"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti