Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Fort Worth, TX
Portcullis Gate Repair is a Fort Worth gate company that handles the full range of local gate work, from ornamental iron driveway gates in Fairmount to heavy pipe-frame ranch gates out past the Weatherford Road corridor. Fort Worth’s mix of historic homes, HOA-governed subdivisions, and western Tarrant County acreages means one gate company rarely sees the same job twice in a day. The clay soil here moves posts out of alignment seasonally, and the summer heat is hard on operators and rollers. When your gate stops working, call (940) 412-7340 and you’ll get a live person, a straight answer, and a written price before anything gets taken apart.
Why Fort Worth Homes Are Different
Fort Worth gate work is shaped by three things: the soil, the heat, and the age of the housing stock. The Blackland Prairie clay under much of Tarrant County shrinks hard in summer drought and swells back after rain, which slowly heaves gate posts out of plumb. A gate that swung fine in May can hang and drag by September, and re-hanging it without addressing the footing just sets up the same callback next season. Our techs probe post depth on every alignment call, because a 36-inch post in this soil will move noticeably within two or three wet-dry cycles.
Then there’s the heat. Fort Worth summers routinely pass 105°F, which warps metal frames, breaks down rubber seals, and turns nylon rollers brittle. The February 2021 ice event is another local reality: hundreds of residential and commercial gates across the city seized hydraulic operators and cracked plastic gear housings all at once. Historic neighborhoods like Ryan Place and Berkeley Place add their own wrinkle, with early-1900s wrought-iron gates that need careful repair rather than replacement. And in HOA communities along the Alliance corridor and southwest Fort Worth, gate styles are often written into the covenants, so a repair has to match the approved look, not just work.
Our Main Fort Worth Services
Most Fort Worth homeowners start with one of two calls: a gate that won’t open, or a gate that needs to be replaced entirely. Each service has its own Fort Worth page with full pricing and detail.
Gate Repair in Fort Worth
Gate repair in Fort Worth usually means diagnosing a gate that drags, sags, won’t latch, or won’t stay put. We see a lot of post movement from the clay soil, worn hinges on older iron gates, and failed wheels on sliding ranch gates. A Kingswell tech arrives in a window you agreed to, gives you a written price before touching a bolt, and leaves the job site clean. Every repair carries the 365-Day Done Right Promise in writing: if it fails inside a year, we come back and fix it at no charge. See typical repair costs and what we can fix same-day on the Gate Repair in Fort Worth page.
Gate Installation in Fort Worth
New gate installation in Fort Worth has to account for the clay soil from day one. We pour deeper footings than standard suburban specs call for, because a 36-inch post in western Tarrant County will be out of plumb within a couple of seasons. That’s also true for automatic driveway gates in HOA neighborhoods where the style has to match the community standards. The written price comes before the work starts, and the Kingswell Guarantee covers the install in writing. For material options, lead times, and what a full driveway gate replacement costs, see Gate Installation in Fort Worth.
Electric Gate Repair in Fort Worth
Electric gate repair in Fort Worth spans automatic opener replacement, safety sensor faults, and control board failures on residential and ranch systems alike. The heat here shortens the life of plastic gear housings and rubber seals, and operators that sat through February 2021 often show issues for years afterward. Our techs are factory-trained on FAAC, BFT, Linear, and Viking systems, among others, so the person who arrives already knows your operator. Diagnosis is included with the written quote. For full detail on opener swaps, wiring, and safety edges, read the Electric Gate Repair in Fort Worth page.
Not sure which Fort Worth service you need? Call (940) 412-7340 and describe what the gate is doing. We’ll tell you which page applies and what the repair likely costs before we ever schedule a truck. And don’t forget the home page for the full picture of what Portcullis does.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Fort Worth
Our Fort Worth techs service nine gate-operator brands, and we stock common parts locally for FAAC, BFT, Linear, and Viking systems, the ones we see most often on Fort Worth driveway and ranch gates. That local stock means a lot of opener repairs happen in one visit rather than two. See the full list on our brands page.
Pricing for Gate Company in Fort Worth, TX
Every Fort Worth gate job is quoted in writing before any work starts. The price below is what we’ve seen on real Fort Worth jobs, but your exact cost depends on gate size, materials, and what’s actually wrong. You’ll know your number before a single bolt is turned.
| Service | Typical range in Fort Worth |
|---|---|
| Hinge replacement on ornamental iron gate | $180-$340 |
| Gate alignment after post movement | $150-$275 |
| Swing gate opener swap | $650-$1,200 |
| Sliding gate opener swap | $850-$1,500 |
| Control board replacement | $300-$650 |
| Safety sensor or edge repair | $120-$260 |
| Driveway gate install (single swing, ornamental steel) | $2,800-$6,500 |
| Driveway gate install (boxed steel with opener) | $5,500-$11,000 |
| Heavy pipe-frame ranch gate install | $3,500-$9,000 |
What pushes prices up in Fort Worth is usually post depth. The clay soil means a proper footing has to be dug deeper than in sandier ground east of the Metroplex, and a gate that’s been re-hung twice already often needs new steel posts poured right the first time. You’ll see the full number on paper before we start, and the price we quote is the price you pay.
Neighborhoods We Serve in Fort Worth
Our techs run calls across Fort Worth daily, from the historic districts south of downtown to the HOA communities along the Alliance corridor and the acreage properties west of Loop 820.
- Fairmount
- Ryan Place
- Berkeley Place
- Alliance corridor
- Walsh Ranch
Most Fort Worth repair calls get scheduled within one to two business days, and emergency calls, like a gate stuck open, get priority dispatch.
Service Area – Cities Near Fort Worth
Portcullis Gate Repair also covers the surrounding Tarrant County cities. If you’re in Haltom City, TX, North Richland Hills, TX, Hurst, TX, or Kennedale, TX, you get the same written price guarantee and 365-Day Done Right Promise as our Fort Worth customers.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fort Worth
Most Fort Worth repair calls are scheduled within one to two business days. A gate stuck open or a security gate that won’t close gets emergency priority, and a live person answers the phone 24/7 at (940) 412-7340 to talk through what’s happening and get you on the schedule.
Most residential gate repairs in Fort Worth need no permit. New installations, especially automatic driveway gates near a right-of-way, may need city review, and HOA communities often have separate gate-style rules. We’ll flag any of that before you commit to a written price.
Yes. Our techs regularly work on heavy pipe-frame swing gates and long sliding gates on acreage properties along the Weatherford Road corridor and west. Service through this page is coordinated from our Dallas-Fort Worth office, and crews serve Fort Worth locally.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fort Worth Customers Say
"Electric gate kept doing its own thing, opening at random. The tech found a shorted sensor and a worn board, fixed both, and showed me the old parts. Price was what he quoted on the phone."
- Cassandra Pike"Installed a new gate for us after the old wooden one rotted out. Clean work, showed up on time both days, and the written price didn't change. It swings perfectly."
- Donna Kirkpatrick"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad