Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Kennedale, TX
Gate work in Kennedale, TX rarely looks like gate work in Mansfield or Fort Worth. We’re out here on half-acre ranch lots with wrought-iron swing gates that went in during the Reagan administration, and twenty minutes later we’re at a commercial cantilever slide gate on Industrial Boulevard wide enough for a semi to clear. The Blackland Prairie clay under this city heaves and contracts seasonally, and we see the results in leaning posts, binding tracks, and hinges that fatigue years earlier than they would on sandy soil. If your gate is acting up in Kennedale, call (940) 412-7340 and we’ll give you a straight price before anything gets taken apart.
Why Kennedale Homes Are Different
Most residential gates in Kennedale were installed when the house was built, and most of the houses went up in the 1980s and 1990s. That means the gate stock we service is now 25 to 40 years old. Wrought-iron swing gates from that era were built heavy and ornamented, but the hinges were sized for a post that would never move. Problem is, Kennedale sits on Blackland Prairie clay, and that clay does not sit still. Spring rains soak it and it swells. A dry Texas summer bakes it and it contracts. Posts lean, hinges bind, and the gate starts dragging on the latch side. We reset posts, rehang gates, and re-square frames on this soil every week, and the fix has to account for the clay or it fails again inside a year.
The commercial side of Kennedale is a different animal entirely. Along Industrial Boulevard and the surrounding corridor, we service heavy cantilever slide gates on truck yards, warehouse docks, and fleet lots. Those gates are built for clearance, not curb appeal, and when one fails it can strand a loaded trailer or block a dock at peak hours. The same technician who resets a leaning ornamental post on a Kennedale ranch driveway in the morning might be pulling a 40-foot slide gate off its track in the afternoon. That dual market shapes how we stock our trucks, how we schedule, and why we carry parts for both light residential operators and heavy commercial units.
Our Main Kennedale Services
The two jobs Kennedale homeowners call us about most are a gate that has stopped swinging and an automatic operator that has stopped responding, and installation runs a close third when a property changes hands or a fence gets rebuilt. Each service has its own Kennedale page below, where we break down pricing, timelines, and what the job involves in this specific city.
Gate Repair in Kennedale
Most Kennedale gate repairs start with a post that has moved or a hinge that has finally given out, and the fix often requires digging, re-setting, and re-hanging rather than just swapping a part. We carry reinforcement plates, heavy-duty hinges, and steel post sleeves on the truck, and we quote the full repair in writing before we touch a bolt. Clay-soil heave is a constant here, and we account for it. See the full scope and local pricing on the Gate Repair in Kennedale page.
Gate Installation in Kennedale
A new gate in Kennedale has to be designed around the clay, the heat, and what the gate actually has to do. A decorative wood privacy gate for a half-acre yard has different requirements than an ornamental iron driveway gate or a commercial slide gate on the industrial corridor. We order, measure, set posts below the frost-and-heave line, and put the price in writing before any work starts. Details and full pricing for residential and commercial projects are on the Gate Installation in Kennedale page.
Electric Gate Repair in Kennedale
Automatic gate operators in Kennedale contend with two local conditions: summer heat that overheats motors and control boards, and older wiring that was never sized for modern smart-home integration. We diagnose the operator, the safety edges, the loop detectors, and the power run, and we service nine major operator brands so the tech who arrives already knows your system. Read the full breakdown on the Electric Gate Repair in Kennedale page, including what fails most often in this area and what it costs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Kennedale
We regularly service FAAC, BFT, Linear, and Viking operators across Kennedale, and our trucks carry common replacement parts for these brands so many repairs finish on the first visit. When a specific board or actuator has to be ordered, we handle it the same day and schedule the follow-up around your availability. See the full equipment list on our brands page.
Pricing for Gate Company in Kennedale, TX
| Service | Typical range in Kennedale |
|---|---|
| Swing gate hinge replacement (pair) | $150 - $450 |
| Gate post reset on clay soil | $300 - $800 |
| Swing gate actuator (operator arm) swap | $600 - $1,600 |
| Control board replacement | $350 - $950 |
| Slide gate roller and track repair | $225 - $700 |
| Safety edge or photo eye replacement | $180 - $475 |
| Automatic gate operator installation (parts and labor) | $1,200 - $3,800 |
| Commercial cantilever slide gate repair (per job) | $500 - $2,500 |
| Full gate installation (residential, standard driveway width) | $2,800 - $9,500 |
| Service call and diagnosis (waived with repair) | $75 - $125 |
What pushes a Kennedale price toward the top of a range is usually the clay. A post that has to be dug out, re-set in concrete, and left to cure takes more labor than a bolt-on hinge swap, and a summer heat-bound slide gate often needs track realignment on top of the roller work. Whatever the number, you get it in writing before any work starts, and that is the same figure on the final invoice after we finish.
Neighborhoods We Serve in Kennedale
We run calls across all of Kennedale, from the ranch-style lots off Kennedale Parkway to the larger acreage parcels on the city’s south and east edges, and we cover the commercial corridor along Industrial Boulevard the same way. Response is usually same-day or next-morning for residential repairs, and emergency commercial calls get priority when a dock is blocked.
- Kennedale Parkway corridor
- Industrial Boulevard commercial district
- Sublett Road area
- Mansfield Cardinal area
- East Kennedale acreage lots
Service Area – Cities Near Kennedale
Beyond Kennedale, our crews also serve the surrounding Tarrant County cities where the same clay soil and aging gate stock show up. We handle gate repair in Mansfield, TX, Burleson, TX, and Fort Worth, TX, and we extend service as far as Arlington, WA for clients with properties in both regions. If your city is listed, call us and we’ll schedule the same way we do for local Kennedale jobs.
Serving Kennedale, TX - Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Kennedale
Most residential calls in Kennedale get same-day or next-morning service, and we commit to a real arrival window when you schedule. Commercial emergencies on the industrial corridor where a dock or fleet gate is down get priority. Call (940) 412-7340 and a live person answers around the clock.
Whether you need a permit depends on the scope and the property, and it is something we check during the estimate. We confirm any permitting requirements before work begins and price accordingly. You’ll know the full cost in writing before anything is installed or repaired.
Yes, and that dual coverage matters more in Kennedale than in most suburbs because the city has both large-lot residential gates and heavy commercial slide gates on the industrial corridor. The same crew handles both, and our trucks carry parts for each. Call us and we’ll quote your specific gate, not a generic one.
If your gate is sticking, leaning, or not opening at all in Kennedale, call Portcullis Gate Repair at (940) 412-7340. We’ll give you a written price before any work starts, show up in the window we gave you, and back the repair with the 365-Day Done Right Promise. Dean Prescott leads our team, and every job carries the same Kingswell Guarantee: written price, real arrival window, clean job site, and written guarantee on the repair.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Kennedale Customers Say
"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti"Good repair on a sagging gate and a new hinge welded on. Took them a couple days to get the part in, but they told me that up front and it's been solid since."
- Hector Villanueva"The opener gave out and we were manually pushing the gate for a week. Portcullis got us in quick, swapped the opener, and set up the remotes for both our cars. Great to have it working again."
- Priscilla Nava