Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Kennedale
Gate installation in Kennedale costs between $2,800 and $9,500 for most residential driveway gates, with custom ornamental work on ranch-style lots running higher depending on the ironwork, operator system, and footing depth. We schedule most Kennedale installations within five to seven business days of the written estimate, and we show up in the window we give you. The soil here demands footings that go deeper than what a standard gate company pours, and we account for that before the first post hole is dug. If you’re planning a new driveway gate on Wildcat Way, along Dick Price Road, or anywhere in the 76060 zip code, call (940) 412-7340 and we’ll walk you through the real numbers.
Why Portcullis Gate Repair Is Kennedale’s Preferred Gate Installation Company
Kennedale isn’t one market, it’s two. The residential side is ranch homes on half-acre and multi-acre lots, mostly built in the 1980s and 1990s, where wrought-iron swing gates were standard from day one. The commercial side runs along Industrial Boulevard, where freight trucks pull through heavy cantilever slide gates that have to clear a semi without taking off a mirror. Our Gate Installation team carries equipment for both on the same truck because on a given Tuesday, we might set a custom ornamental driveway gate at 9 a.m. and spec a commercial slide gate replacement before lunch.
We’re an independently owned Kingswell company, which means every Kennedale job carries the same four written commitments: a price before the work starts, a real arrival window, a clean job site, and a written guarantee on the installation. Dean Prescott leads our crews, and he holds every tech to the 365-Day Done Right Promise. If a gate we install in Kennedale fails inside that year, we come back and fix it at no charge. That’s not a marketing line. It’s stamped on the invoice.
Kennedale homeowners who have already been burned by a no-show gate company or a quote that doubled at the door tend to ask us the same question: what’s different here? The answer is that we answer the phone around the clock, the technician who arrives is background-checked and in uniform, and the price we quote is the price you pay. We’ve serviced gates from Sublett Road to the Mansfield edge, and we know which lots fight back when the clay shifts.
Driveway Gate Installation in Kennedale
Driveway Gate Installation in Kennedale almost always starts with the ground, not the gate. The Blackland Prairie clay under Tarrant County expands hard when spring rain soaks it and contracts just as hard in summer drought. On the ranch lots off Bowman Springs Road and along New Hope Road, that movement heaves shallow footings out of level in a single wet season. So when we install a driveway gate here, we over-excavate the post holes and pour concrete below the active clay zone. That’s the difference between a gate that swings true for 15 years and one that starts dragging on its hinge post by the second spring.
A typical Kennedale driveway gate installation runs $3,200 to $7,800 for a standard steel or aluminum swing gate with a single operator, including the footing work. Custom ornamental iron gates with arched tops, finials, and scrollwork land between $6,500 and $14,000 depending on the linear feet and the complexity of the fabrication. We always give you the written price before a single bolt is turned, and that price includes the deeper footings, not as an add-on.
Custom Fabricated Gates for Ranch Lots
Most of the homes on Kennedale’s larger lots were built with gates that matched the era: simple wrought-iron, boxy, functional. When we fabricate a replacement, we match it to the house instead. Brick tones, roofline angles, the style of the existing iron fence if there is one. A custom ornamental gate costs more than an off-the-shelf panel, but it’s the piece people see first.
Operators and Entry Systems
A new gate is only as good as what moves it. We install and program operators from DoorKing, LiftMaster, and Elite, and we pair them with keypad entry, intercom, or camera systems so the gate works the way you actually enter and leave. On Kennedale ranches where the driveway is long, we often recommend an underground operator that keeps the motor out of sight and out of the weather.
Sliding Gate Installation in Kennedale
Sliding Gate Installation in Kennedale splits into two very different jobs. On residential lots, a slide gate usually replaces a swing gate that never had room to open without blocking the driveway apron. On Industrial Boulevard and the surrounding commercial corridors, sliding gates are cantilever systems built to span 30 to 40 feet and clear a semi truck with room to spare. The engineering priorities are opposite, and we treat them as two separate trades on the same service list.
A residential slide gate in Kennedale typically runs $4,500 to $10,500, including the track or cantilever rollers, operator, and the deeper footing work the clay soil demands. Commercial cantilever gates start around $12,000 for mid-sized openings and climb steeply with the span, duty cycle, and access control integration. Every quote is written, itemized, and agreed before we order steel.
Slide Gates on Clay Soil
Slide gates don’t have hinge posts, which is why some homeowners assume they’re immune to the soil movement. They’re not. The track or the cantilever rollers sit on the same expanding clay, and if the footing isn’t below the active zone, the gate rides out of level and starts grinding on the rollers. We pour slide gate footings the same way we pour swing gate footings: deep.
Commercial Cantilever Work
When a freight gate fails on Industrial Boulevard, it doesn’t just inconvenience a homeowner; it blocks a loading dock or strands fleet vehicles. That’s why commercial slide gate work in Kennedale gets a different urgency than a subdivision gate in Mansfield. We carry heavy-duty rollers, rack and pinion hardware, and operators rated for continuous duty cycles, and we know how to get a wide-span gate back in service without shortcutting the footings.
Trusted Brands We Service in Kennedale
Our techs train on nine operator brands, and in Kennedale we see a lot of DoorKing keypads on the older ranch gates, Elite operators on commercial properties, and LiftMaster systems on newer residential installs. Because we stock common parts locally, a Kennedale gate that needs a replacement control board or a new photo-eye set doesn’t wait a week for a shipment from a distributor. If you’re planning an installation around a brand you already know, tell us when you call and we’ll spec the operator to match your existing access control rather than forcing you onto whatever’s on the truck.
Common Gate Installation Problems We See in Kennedale Homes
- Heaved hinge posts on 1980s and 1990s ranches. The original footings were poured shallower than the active clay zone, so after 25 to 40 years of wet spring and dry summer cycles, the post tilts and the gate leaf starts scraping the driveway. The fix is a deeper footing and a re-hung gate, not just shimming the hinge.
- Underground operators shorting out or failing to integrate with smart-home entry. Wiring installed two decades ago wasn’t rated for today’s intercom and camera loads, and once the insulation degrades in the clay moisture, the operator faults intermittently. We replace the wire run and the operator together when we install a new gate.
- Mid-afternoon slide gate binding in 100°F heat. A long cantilever gate expands enough in direct summer sun to bind on its track. By evening it moves again. The operator isn’t failing, the frame is expanding, and the fix is usually a roller or track adjustment rather than a motor replacement.
- Wrought-iron fatigue at the hinge welds. Kennedale’s original iron gates were built light. After decades of opening in wind and shifting on clay, the hinge-side welds crack and the gate sags. A new installation gives us the chance to build the replacement heavier, with reinforcement where the old one failed.
Pricing for Gate Installation in Kennedale, TX
Here are the numbers we give Kennedale homeowners on the phone, before anyone drives out to measure. A standard single swing driveway gate with one operator and deep clay footings runs $3,200 to $7,800. A residential slide gate runs $4,500 to $10,500. Custom ornamental iron work with fabrication runs $6,500 to $14,000. A commercial cantilever slide gate starts around $12,000. The two variables that move the price most in Kennedale are footing depth on clay lots and the span of the gate, because both change the steel and concrete quantity. Every estimate is free, written, and yours to keep, and the price is set before any work starts. Call (940) 412-7340 for an exact quote on your gate.
We Also Serve Cities Near Kennedale
Our crews work throughout southern Tarrant County. If you’re in Arlington, Mansfield, Burleson, or Fort Worth, you’ll get the same Kingswell Guarantee and the same written pricing that Kennedale homeowners rely on. Same phone number, same people answering it.
Serving Kennedale, TX - Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Kennedale
Kennedale sits on Blackland Prairie clay, a soil that expands sharply when saturated by spring rain and contracts just as sharply in summer drought. Mansfield has more mixed sandy loam in places, but Kennedale’s clay is consistent across the residential ranch lots, so shallow footings heave on a seasonal cycle. The deeper we pour the footing, the less the post moves. If your gate post is tilting now, call (940) 412-7340 and we’ll tell you whether the fix is a simple re-hang or a full footing replacement.
Yes, and this is the standard on Kennedale’s higher-end ranch lots. We fabricate the gate to match the house’s brick tones and ironwork style, then we pair it with your existing entry system or install a new intercom, keypad, or camera. On a half-acre lot off Wildcat Way, we replaced a tired wrought-iron swing gate with a custom ornamental piece and a DoorKing keypad, and the driveway finally looked like it belonged to the house. A custom job like this runs $6,500 to $14,000. Call (940) 412-7340 for a written quote.
Usually not. Kennedale’s summer highs regularly pass 100°F, and a long metal frame expands enough in direct sun to bind on its track. By evening the frame cools, contracts, and the gate moves freely again. The operator is often fine, but repeated binding will eventually burn out the motor. We adjust the track or rollers to account for that thermal expansion. Call (940) 412-7340 and a tech can diagnose it on site.
A semi truck mirror-to-mirror width is about 10 feet, and the trailer corners swing wide, so a freight gate along Industrial Boulevard typically needs a 30 to 40 foot clear opening depending on the approach. We design, fabricate, and install cantilever slide gates for exactly this, and we handle the access control that keeps the wrong vehicles out. Commercial cantilever installations start around $12,000. Call (940) 412-7340 and we’ll measure the opening and give you a written number.
Yes. Photo-eyes and edge sensors are safety devices that prevent the gate from closing on a person, a pet, or a vehicle. Kennedale follows the same UL 325 safety standards that apply across Texas, and any automatic gate we install includes the required safety devices as part of the written quote, not as an after-the-fact upsell. If a contractor prices a gate without them, that’s a red flag about what else they’re leaving out.
Get a Written Estimate for Your Kennedale Gate
Whether you’re replacing a heaving wrought-iron swing gate on an acre lot or specing a commercial cantilever for an Industrial Boulevard property, the process starts with a phone call. You’ll reach a live person, we’ll ask about your gate and your property, and we’ll schedule a measure. Then you get the price in writing before any work begins. Call (940) 412-7340 today and ask for Dean’s team.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Kennedale since 2008.