Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Burleson
Gate installation in Burleson runs $1,400 to $8,500 for most residential jobs, depending on whether you need a wood privacy swing gate, a tube-steel sliding gate, or a fully automated driveway entry with operator and access hardware. We quote every job in writing before a single post hole is dug, so the number you approve is the number you pay. Portcullis Gate Repair has served Burleson homeowners since 2008 as an independently owned Kingswell company offering Gate Repair - Burleson, and our crews know the difference between a 2004 tract subdivision gate off Alsbury Blvd and a ranch-style automated entry on an acreage lot in the ETJ. Call (940) 412-7340 for a free estimate on your gate installation.
Why Portcullis Gate Repair Is Burleson’s Preferred Gate Installation Company
Burleson homeowners keep calling us back for one reason: we write the price down before we start and we stand behind the work for a full year. That’s the Kingswell Guarantee, and it applies to every gate installation we do in Johnson County. Dean Prescott, who leads our Burleson service area, keeps the same standard on every job: a written price, a real arrival window, a clean job site, and a written guarantee on the invoice. When a Burleson HOA requires architectural approval before installation, we help you gather the specs, drawings, and material details the review committee wants to see, so you don’t buy a gate that gets rejected.
Our Gate Installation team shows up in uniform, background-checked, and familiar with the specific gate-operator hardware common across Burleson’s newer subdivisions and older acreage properties. We coordinate directly with HOAs and management companies for shared entry systems, which saves you the back-and-forth that stalls many jobs. And because every Portcullis location is independently owned and operated but held to the identical Kingswell Guarantee, you get the same written promises whether the job is a simple pedestrian gate near the Chisenhall Fields area or a double swing gate off Renfro Street.
Sliding Gate Installation in Burleson
Sliding Gate Installation in Burleson is the right call when you have a wide driveway, limited swing clearance, or a slope that would make a swing gate drag. A sliding gate rides on a track or cantilever rollers instead of pivoting on hinges, so it handles Burleson’s flat clay soil better than a swing gate that can rack when the ground shifts. Most sliding gate installations in Burleson run $2,800 to $7,500 for a tube-steel or ornamental iron gate, including the track, rollers, and post mounting. Add an operator and access keypad and the total typically lands between $4,500 and $8,500.
Track-Mounted vs Cantilever Sliding Gates
A track-mounted sliding gate rolls on a ground rail, which is affordable but needs regular clearing of grass and debris. A cantilever sliding gate rides above the ground on offset rollers, which is better for Burleson’s clay soil because there is no track to clog or heave. We’ll recommend the right style based on your driveway grade and how much maintenance you want to deal with.
HOA Considerations for Sliding Gates
Many Burleson HOAs in subdivisions built after 2005 have specific rules about gate style, height, and finish. A sliding gate made of raw steel will often fail architectural review until it’s powder-coated or painted to match the community standard. We submit the material spec and finish details your HOA needs before you commit to the purchase.
Gate Opener Installation in Burleson
Gate Opener Installation in Burleson pairs a new or existing gate with the motorized arm and control hardware that lets you open it from your car. The actuator – the motorized arm that physically pushes or pulls the gate – plus the control board, safety photocells, and keypad entry typically run $1,800 to $4,200 installed, depending on whether you go with a residential swing-arm opener or a heavier sliding gate operator. We service and install nine major gate-operator brands including FAAC, LiftMaster, BFT, and Viking, so the tech who arrives already knows the specific system on your property.
Retrofitting an Existing Manual Gate
If your Burleson home already has a solid manual gate, we can often retrofit an opener without replacing the gate itself. The job involves mounting the operator, running a power line from your outdoor outlet or panel, and adding safety edges and photocells that stop the gate if a car or child is in the way. A retrofit usually takes one day on site, and we quote it fixed-price.
New Construction and Full Automation
For new builds on Burleson acreage lots, we install the gate, posts, operator, and access controls as one coordinated job. That includes the loop detectors that sense a vehicle waiting at the gate, the safety photocells that prevent the gate from closing on a car, and a keypad or intercom tied to your existing entry system. This is measured, ordered, and scheduled work – we’ll give you a free measure and written price, not a same-day promise.
Trusted Brands We Service in Burleson
We keep parts on hand for the gate operators Burleson homeowners use most: LiftMaster, FAAC, BFT, Linear, and Viking, along with the hardware brands that show up on older acreage systems. That local parts stock means fewer week-long waits when a control board fails or an actuator burns out. Dean Prescott’s team is certified across nine major gate-operator brands, so the technician who answers your call in Burleson already knows how your specific system is wired and what typically fails on it.
Common Gate Installation Problems We See in Burleson Homes
- HOA rejection after materials are ordered. Burleson HOAs frequently require architectural approval for gate style, height, finish, and wood species. When a homeowner buys a gate first and gets rejected after, the material cost is already sunk. We help you get approval before purchase by submitting the right specs to the review committee.
- New gates hung on old cedar posts in expansive clay. Johnson County’s black clay heaves and shrinks with every wet-dry cycle. A new gate hung on a cedar post that has already rotted or racked at the base will sag within one season. We dig below the active clay zone and set new posts properly, so the gate stays dead-level.
- Shared entry system conflicts with management companies. Burleson’s gated communities often run existing DoorKing or LiftMaster access hardware. Installing a new gate without coordinating the loop detector and safety photocell with the management company can leave the system dead. We handle that coordination directly.
- Wind damage from open-plains gusts. High straight-line winds from the south bend lightweight aluminum frames and rip boards off wood gate panels that lack adequate diagonal bracing. We build and brace for that wind load, not just for appearance.
Pricing for Gate Installation in Burleson, TX
Here’s what Burleson homeowners can expect to pay for common gate installation work. A standard wood privacy swing gate runs $1,400 to $3,200. A tube-steel sliding gate runs $2,800 to $7,500. A double driveway gate runs $3,500 to $8,500. Adding a gate opener with keypad entry runs $1,800 to $4,200 on top of the gate itself. If your old posts are rotted or heaved in the clay, a post pull and reset adds $400 to $800 per post. Every quote comes in writing before any work starts, and the price we agree on is the price you pay.
For a free measure and written estimate on gate installation in Burleson, call (940) 412-7340. We’ll walk the site, check the soil and existing posts, and give you a number you can actually plan around.
We Also Serve Cities Near Burleson
Our crews serve Burleson and the surrounding Johnson and Tarrant county communities, including Crowley, Joshua, Alvarado, and Kennedale. If you live in one of those cities and need Gate Installation in Burleson or nearby, call us and we’ll schedule a free measure.
Serving Burleson, TX - Our Local Coverage Area
We’re based in the Burleson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Burleson
Yes, in nearly every Burleson subdivision with an HOA, you need architectural approval before installing a driveway gate. The committee typically reviews gate style, height, finish, wood species or metal type, and sometimes even the paint or stain color. Portcullis Gate Repair helps you submit the right specs so you don’t buy a gate that gets rejected. Call (940) 412-7340 and we’ll walk you through what your HOA needs.
If your gate stopped self-latching, the most common cause in Burleson is a hinge post that has heaved or racked in Johnson County’s expansive black clay. The gate panel may still be fine; the post is the problem. We’ll dig down, check the post base, and tell you honestly whether it’s a post reset, a hinge adjustment, or a full gate replacement. A full replacement isn’t the right answer every time, and we won’t sell you one if a repair will hold. Call (940) 412-7340 for an honest assessment.
Yes, we install automatic gate operators on acreage properties in and around Burleson’s extraterritorial jurisdiction all the time. These are typically tube-steel or wrought iron driveway gates with heavier hardware than what you’d find on a tract subdivision wood gate. We install the operator, loop detector, safety photocells, and keypad or intercom as one system, sized for the gate’s weight and the driveway’s length. Call (940) 412-7340 for a free measure and written quote.
Yes, we can tie a new shared entry gate into your existing DoorKing or LiftMaster access hardware, keypad entry, and resident intercom system. The job requires coordinating the new gate operator, loop detector, and safety photocell with your management company, which we handle directly. That way residents keep their same entry codes and the HOA doesn’t have to reissue credentials. Call (940) 412-7340 to schedule a site walk for your community gate.
A sliding gate is more wind-resistant than a swing gate because it doesn’t present a broad face to the wind the way a swinging panel does. Burleson’s straight-line winds off the open plains regularly bend lightweight aluminum swing gates and strip boards off unbraced wood panels. A properly built tube-steel sliding gate with diagonal bracing handles that wind load much better. We’ll evaluate your driveway and tell you if a sliding gate is the right fix or if a braced swing gate would hold. Call (940) 412-7340 for a free assessment.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Burleson since 2008.